Rizagul Dyussova

Mrs. Rizagul Dyussova

oil and gas business, S. Toraighyrov Pavlodar State University, Pavlodar, Kazakhstan
orcid
work and work

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 July 2025 in Buildings
Verified
Journal Article
Open access
PDF file
GSGaini Seitenova
Gaini Seitenova
RDRizagul Dyussova
Rizagul Dyussova
DADaulet Abaikhanovich Aspanbetov
Daulet Abaikhanovich Aspanbetov
AZAssel Zhexembayeva
Assel Zhexembayeva
Kinga KorniejenkoKinga Korniejenko
Kinga Korniejenko
DSDarkhan Abaikhanovich Sakanov
Darkhan Abaikhanovich Sakanov
The modern road industry requires a more effective solution according to efficiency and minimizing environmental burden. This article discusses the use of recycled materials to modify bitumen binders within the concept of the circular economy. The main aim of this article was to create a new composite based on waste materials, including polymer waste and rubber crumb. The important element is the usage of locally available waste that has not been investigated previously as a material for asphalt modification. The prepared composition was preliminarily assessed according to chemical composition. Next, research dedicated to road application was conducted, including the following: determination of the resistance to hardening, aging under the influence of high temperature and air, as well as oxidation processes, assessment of penetration, and evaluation of the softening point. The conducted studies showed that the new composites with the addition of polymer waste and rubber crumb improve the thermal stability, elasticity, and resistance of bitumen to aging. Optimum concentrations of modifiers were determined that provide an increase in the performance characteristics of bitumen, including a decrease in the brittleness temperature and an increase in the softening temperature. The obtained results demonstrate the potential for the introduction of new composites based on recycled materials in road construction, contributing to increased environmental sustainability and economic efficiency.

28 February 2023 in Neft i Gaz
Verified
Journal Article
Closed access
GSGaini Seitenova
Gaini Seitenova
LUL.N. GUMILYOV EURASIAN NATIONAL UNIVERSITY
L.N. GUMILYOV EURASIAN NATIONAL UNIVERSITY
RDRizagul Dyussova
Rizagul Dyussova
GBG.R. Burumbayeva
G.R. Burumbayeva
NUNAO "TORAIGYROV UNIVERSITY"
NAO "TORAIGYROV UNIVERSITY"
TTToo Tengizchevroil
Too Tengizchevroil

1 April 2026 in Kazakhstan journal for oil & gas industry
Verified
Journal Article
Open access
GSGaini Seitenova
Gaini Seitenova
ASAyazhan G. Syzdyk
Ayazhan G. Syzdyk
RDRizagul Dyussova
Rizagul Dyussova
ZBZhanat A Baigazinov
Zhanat A Baigazinov
ANAzat K. Nurkassimov
Azat K. Nurkassimov
MKMarat T. Kassymzhanov
Marat T. Kassymzhanov
Background: Foamed polyethylene is widely used in construction and in the oil and gas industry as a thermal and acoustic insulation material. Its popularity stems from low thermal conductivity, moisture resistance, and chemical stability. However, its durability and long-term performance remain limited. Radiation crosslinking provides an effective modification method by creating a three-dimensional polymer network and improving resistance to degradation. Aim: This study examines the effects of electron beam dose and gas atmosphere (air, argon, nitrogen) on the crosslinking degree of polyethylenes used in construction and oil and gas insulation. Materials and methods: Polyethylene samples irradiated with electron beams at doses of 75, 125, and 175 kGy in three atmospheres: air, argon, and nitrogen. Crosslinking was evaluated through gel fraction analysis following GOST R 59112–2020. Structural changes were characterized by FTIR spectroscopy using Infralum FT-08 (Russia) and Shimadzu IR Spirit (Japan). Results: Maximum crosslinking was observed at 125 kGy. Irradiation in inert atmospheres (argon and nitrogen) yielded higher gel fractions than in air, where degradation processes predominated. findings confirm a direct correlation between irradiation conditions and the structural stability of polyethylene. Conclusion: Radiation crosslinking significantly improves the performance of polyethylene by enhancing its thermal, chemical, and mechanical resistance. This approach can be recommended for producing long-lasting insulation and protective materials in both construction and oil and gas applications.

29 June 2024 in Bulletin of Shakarim University. Technical Sciences
Verified
Journal Article
Open access
PDF file
ZNZhanara Nurakhmetova
Zhanara Nurakhmetova
SKS. A. Kosparmakova
S. A. Kosparmakova
RDRizagul Dyussova
Rizagul Dyussova
GSGaini Seitenova
Gaini Seitenova
AJAssel Jexembayeva
Assel Jexembayeva
This paper presents a review of both the research and practice regarding the latest available information on bitumen modified using polymers, among which special attention is paid to polyethylene (PE) and polypropylene (PP), both widely used to significantly improve the properties of bitumen. In this literature review, the authors concentrate on the chemical composition of modified bitumen, assessing the various approaches utilized in improving its engineering properties in paving, as well as looking at traditional additives and polymers. The latter have been shown to greatly enhance the performance characteristics and properties of bitumen. The viscoelastic behavior of polymer-modified bitumen (PMB) depends on various factors, including initial polymer structure and concentration, mixing temperature and technique, as a well as species of bitumen and its resistance to factors such as solvents and temperature fluctuations. Though an assertion can be made that both traditional additives and polymers have the potential to improve specific properties of bitumen, PMB appears to provide significant increases to the ability of the composite material to withstand a broader range of climatic conditions.

24 December 2025 in Kazakhstan journal for oil & gas industry
Verified
Journal Article
Open access
RDRizagul Dyussova
Rizagul Dyussova
YZYekaterina A. Zhakmanova
Yekaterina A. Zhakmanova
GSGaini Seitenova
Gaini Seitenova
Background: This study compares catalytic reforming technologies, focusing on fixed-bed reforming and continuous catalyst regeneration (CCR) reforming. Fixed-bed systems offer simpler process configurations and lower operational and maintenance requirements, making them a more cost-effective option. Their ability to extend catalyst life by minimizing the frequency of regeneration and replacement represents a notable economic advantage. In contrast, CCR reforming delivers higher processing efficiency and improved product quality but demands greater operating expenditures and more advanced catalyst control systems. Aim: The study evaluates the effectiveness of different catalytic reforming technologies – fixed-bed and CCR – in terms of their impact on process stability, product quality, feedstock and product composition, as well as their potential to enhance the productivity and operational resilience of Kazakhstan’s refineries amid the ongoing development of the national petrochemical sector. Materials and methods: Comparative analysis, gas chromatography, spectroscopy, component and group analysis, fractional composition determination. Results: The analysis of feedstock used in fixed-bed catalytic reforming demonstrated stable process performance, which contributed to improved predictability of reforming unit operations. The presence of iso-paraffins in the feedstock enhanced the quality of high-octane gasoline, while the increased content of naphthenes and aromatic hydrocarbons in the reformate indicated more efficient conversion of heavy fractions. Conclusion: The analysis confirmed that both fixed-bed and CCR reforming technologies continue to evolve, enabling the production of high-quality end products and ensuring stable refinery operations, thereby contributing to the development of Kazakhstan’s petrochemical industry.

8 July 2025 in Bulletin of Shakarim University. Technical Sciences
Verified
Journal Article
Open access
PDF file
ASA. G. Syzdyk
A. G. Syzdyk
EZE. A. Zhakmanova
E. A. Zhakmanova
GSGaini Seitenova
Gaini Seitenova
RDRizagul Dyussova
Rizagul Dyussova
This article explores the potential of using recycled materials for modifying bituminous binders within the framework of the circular economy concept. Polymer waste and crumb rubber were used for bitumen modification. The conducted research demonstrated that these additives enhance the thermal stability, flexibility, and oxidation resistance of bitumen. Furthermore, it was found that the performance characteristics of modified bitumen significantly improve: the brittle fracture temperature decreases, while the softening temperature increases. The optimal concentrations of modifiers were determined, and their effect on the bitumen structure was studied. As a result of the study, the BND 60/90 («POCR» LLP) + 6% FPMB mixture showed the best results in terms of thermal stability and hardness after oxidation, making it suitable for use in high-performance road pavements. The obtained results confirm the effectiveness of integrating recycled materials into road construction, highlighting their environmental and economic benefits. In line with the principles of the circular economy, the use of recycled polymers promotes the rational consumption of natural resources, waste reduction, and environmental sustainability. Such innovative approaches in road construction enable the creation of durable and long-lasting pavements. Moreover, this study proposes innovative methods for bitumen modification, contributing to the improvement of construction material quality and durability. Thus, the use of recycled materials helps enhance the strength of road pavements, minimize environmental impact, and achieve sustainable development goals.