Dzhamal Amishev

Dr. Dzhamal Amishev

orcid
Assistant Professor in Forest Operations and Forest Manageme...

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 April 2019 in International Journal of Forest Engineering
Verified
Journal Article
Closed access
Raffaele CavalliRaffaele Cavalli
Raffaele Cavalli
Dzhamal AmishevDzhamal Amishev
Dzhamal Amishev
While modern fully mechanized ground-based systems are a default option for safe and productive harvesting, they have always been limited by terrain factors such as slope, soil strength, and roughness. There is a limit with regard to the physical feasibility of operating machines on steep slopes because both the weight and also the force from the momentum created during traction loss can affect stability. A huge interest to improve traction of harvesting machines when operating on steep slopes is arising. One way to improve traction and stability on steep slopes is through assisting harvesting machines by winch and cable to anchor locations such as tree stumps or stationary equipment. This technology offers potential for improving the safety, productivity, and efficiency of a harvesting operation, as well as for improving machine mobility and reducing soil disturbance through the reduction of slip. With the exponential development of such technology, an integrated approach must be developed for conducting productive and injury-free mechanical harvesting operations on steep slopes that draws on the skills and accountabilities of the working team. Beyond a certain physical threshold, the only feasible and achievable solution providing some “intelligent behavior” to machines and systems would be the role of mechatronics application. One of the most relevant points could be the possibility to introduce the concept of “teleoperation” using unmanned ground vehicles. Combining teleoperation with winch-assist technology would provide a platform for extending the range of ground-based equipment to previously infeasible terrain conditions.

1 May 2024 in Plant Diversity
Verified
Journal Article
Open access
FLFangbing Li
Fangbing Li
HQHong Qian
Hong Qian
JSJordi Sardans
Jordi Sardans
Dzhamal AmishevDzhamal Amishev
Dzhamal Amishev
ZWZixuan Wang
Zixuan Wang
XHXingzhao Huang
Xingzhao Huang
The effect of evolutionary history on wood density variation may play an important role in shaping variation in wood density, but this has largely not been tested. Using a comprehensive global dataset including 27,297 measurements of wood density from 2621 tree species worldwide, we test the hypothesis that the legacy of evolutionary history plays an important role in driving the variation of wood density among tree species. We assessed phylogenetic signal in different taxonomic (e.g., angiosperms and gymnosperms) and ecological (e.g., tropical, temperate, and boreal) groups of tree species, explored the biogeographical and phylogenetic patterns of wood density, and quantified the relative importance of current environmental factors (e.g., climatic and soil variables) and evolutionary history (i.e., phylogenetic relatedness among species and lineages) in driving global wood density variation. We found that wood density displayed a significant phylogenetic signal. Wood density differed among different biomes and climatic zones, with higher mean values of wood density in relatively drier regions (highest in subtropical desert). Our study revealed that at a global scale, for angiosperms and gymnosperms combined, phylogeny and species (representing the variance explained by taxonomy and not direct explained by long-term evolution process) explained 84.3% and 7.7% of total wood density variation, respectively, whereas current environment explained 2.7% of total wood density variation when phylogeny and species were taken into account. When angiosperms and gymnosperms were considered separately, the three proportions of explained variation are, respectively, 84.2%, 7.5% and 6.7% for angiosperms, and 45.7%, 21.3% and 18.6% for gymnosperms. Our study shows that evolutionary history outpaced current environmental factors in shaping global variation in wood density.

1 November 2006 in Forest Ecology and Management
Verified
Journal Article
Closed access
Dzhamal AmishevDzhamal Amishev
Dzhamal Amishev
TFThomas R. Fox
Thomas R. Fox

18 June 2008 in International Journal of Forest Engineering
Verified
Journal Article
Closed access
Dzhamal AmishevDzhamal Amishev
Dzhamal Amishev
GMGlen E. Murphy
Glen E. Murphy
Acoustic technology has been successfully used as a nondestructive technique for assessing the mechanical quality of various wood products and species based on stiffness. Many mechanical harvester/processor manufacturers have implemented mechanical sensors to measure tree diameter and length as well as optimal bucking algorithms on their equipment. There is a growing interest in incorporating technologies for measuring internal stem features into a harvester head. The objectives of this study, therefore, were to i) determine and investigate the factors arising from incorporating acoustic instruments on a mechanized harvester head that might influence resonance- based acoustic signal and velocity readings and quality in Douglas-fir, and ii) investigate the issues and considerations associated with suggested working strategies in regard to harvest productivity impacts and processing decisions. After taking into account some feasibility considerations, it was determined that the hold of the machine grapple would not compromise the accuracy of resonance-based acoustic velocity readings. There were three working procedures suggested for measuring resonance-based acoustic velocity: 1) after the stem is delimbed and run through the measuring equipment, 2) once a portion of the stem is measured and the length of its unmeasured portion is forecast, and 3) after the tree is felled by the harvester but before any further processing is done. Regardless of the working procedure, it was determined that logs produced from lower sections of the tree are stiffer than those from upper portions. If the processor head traverses the stem partially or completely, the removal of bark and branches and their effect on acoustic velocity readings should be taken into account. Forecasting routines could be developed to account for imperfect and even non-existing information about tree length with the second or third working procedure. Results yielded by the two methods used for stem height (and consequently acoustic velocity) prediction in this study (linear regression model and a K-nearest-neighbor) were considered rather promising. Testing feasibility concerns with the resonance-based acoustic technique were observed if the entire stem was intact to the very top offshoot bud.

6 October 2025 in Remote Sensing
Verified
Journal Article
Open access
PDF file
MKMohadeseh Kaviani
Mohadeseh Kaviani
Brigitte LeblonBrigitte Leblon
Brigitte Leblon
Thangarajah AkilanThangarajah Akilan
Thangarajah Akilan
Dzhamal AmishevDzhamal Amishev
Dzhamal Amishev
Armand LaRocqueArmand LaRocque
Armand LaRocque
AHAta Haddadi
Ata Haddadi
Accurate tree health monitoring in orchards is essential for optimal orchard production. This study investigates the efficacy of a deep learning-based object detection single-step method for detecting tree health on multispectral UAV imagery. A modified Mask R-CNN framework is employed with four different backbones—ResNet-50, ResNet-101, ResNeXt-101, and Swin Transformer—on three image combinations: (1) RGB images, (2) 5-band multispectral images comprising RGB, Red-Edge, and Near-Infrared (NIR) bands, and (3) three principal components (3PCs) computed from the reflectance of the five spectral bands and twelve associated vegetation index images. The Mask R-CNN, having a ResNeXt-101 backbone, and applied to the 5-band multispectral images, consistently outperforms other configurations, with an F1-score of 85.68% and a mean Intersection over Union (mIoU) of 92.85%. To address the class imbalance, class weighting and focal loss were integrated into the model, yielding improvements in the detection of the minority class, i.e., the unhealthy trees. The tested method has the advantage of allowing the detection of unhealthy trees over UAV images using a single-step approach.

24 April 2026 in Remote Sensing
Verified
Journal Article
Open access
PDF file
MKMohadeseh Kaviani
Mohadeseh Kaviani
Brigitte LeblonBrigitte Leblon
Brigitte Leblon
Thangarajah AkilanThangarajah Akilan
Thangarajah Akilan
Dzhamal AmishevDzhamal Amishev
Dzhamal Amishev
Armand LaRocqueArmand LaRocque
Armand LaRocque
AHAta Haddadi
Ata Haddadi
In this study, Mask R-CNN was applied to 5-band raw reflectance images to detect potato plants in UAV images. The highest model performance across all metrics was achieved with a ResNeXt-101 backbone and transfer learning from the same model trained on apple orchard data. An F-1 score of 84.2% was achieved. To determine whether the plant was infected with PLB, two methods were used. In the first method, a Mask R-CNN with a DINOv3 small variant backbone was applied to 5-band raw reflectance images. The highest achieved F1-score was 69.05%. In the second method, classical ML classifiers were applied to the 5-band raw reflectance images and 16 associated vegetation index images. The highest F1-score (66.71%) was obtained with a decision tree classifier applied to the 16 vegetation index images. Feature importance analysis indicated that chlorophyll- and red-edge-related indices, such as CIgreen, TCARI, OSAVI2, and Red-edge NDVI, were the most discriminative features for distinguishing healthy and unhealthy potato plants. These results show the effectiveness of combining deep learning and machine learning approaches for potato late blight detection using UAV multispectral imagery.