Due to ongoing climate change, urban areas face increasing challenges associated with rising temperatures and growing energy demand. Green roofs have emerged as a sustainable, nature-based solution to enhance urban resilience. This study presents a systematic review of the thermal and energy performance of green roofs in the Mediterranean region, and was conducted following the PRISMA framework. By identifying targeted research questions formulated using the PICO(C) structure, this review systematically evaluates the potential of green roofs to promote sustainable urban environments in Mediterranean regions. The findings highlight their effectiveness in mitigating heat stress, enhancing building energy efficiency, and counteracting urban temperature fluctuations, reinforcing their role as a key climate adaptation strategy in densely populated areas. The review also identifies critical research gaps that must be addressed to facilitate the large-scale adoption of green roofs. Specifically, the lack of long-term performance monitoring, the need for standardized assessment protocols, and the necessity of optimizing green roof configurations for Mediterranean subregions emerge as key areas for future investigation. This study bridges a crucial gap in the literature by providing a systematic, PRISMA-compliant evaluation. It offers the scientific community a robust knowledge base to inform policy, urban planning, and future research directions.
This study examined the atmospheric urban heat island (UHI) phenomenon within the city of Rome (Italy) and its effects on building energy demand. Weather data from 2020 and 2022 collected from six meteorological stations were considered. A Geographic Information System (GIS) was used to analyze the landscape, correlating the percentage of impermeable surfaces with UHI intensity values in each area. Dynamic simulations were conducted using different climatic data to estimate the heating and cooling energy demands for two representative residential buildings. The findings revealed significant differences in the climatic conditions between urban and rural areas, primarily due to temperature increases. The UHI intensities reached maximum values of 4.67 °C and 3.54 °C in 2020 and 2022. In urban areas, the UHI has positive effects on the heating energy demand but results in a significant increase in energy demand for cooling. Considering a building type constructed between 1900 and 1950, a variation of up to 33.03% in the heating energy demand in urban areas compared to rural areas was calculated, along with a variation of up to 81% for cooling. In contrast, considering a more recent building type constructed between 1991 and 2005, the corresponding values reached up to 36.47% and 75.7%.
Since the beginning of the 20th century, many studies have focused on the possibility of considering the sky as a body characterized by an apparent temperature, and several correlations to quantify the apparent sky temperature have been proposed. However, the different models were obtained for specific meteorological conditions and through measurements at specific sites. The available models do not cover all locations in the world, although the evaluation of the sky temperature is fundamental for estimating the net radiative heat transfer between surfaces and the sky. Here, experimental data logged from a regional micrometeorological network (in Italy, within the Lazio region) were processed and used to identify an empirical model for the estimation of the sky temperature in the Mediterranean area. Data relating to atmospheric infrared radiation were used to compute the sky temperature, aiming at identifying a direct correlation with the ambient temperature. Climatic data acquired during 2022 were processed. The proposed correlations were compared with other models available in the literature, including the standard ISO 13790. This study proposes an annual-based direct correlation in its initial phase, demonstrating a superior fit to the measured data compared to well-known direct empirical models from the literature. Subsequently, quarterly-based correlations are introduced further in a secondary phase of the work to improve the model’s adaptation to experimental observations. The results reveal that quarterly-based correlations improve goodness-of-fit indexes compared to annual-based and well-known direct empirical correlations. Finally, a detached building was modeled via a dynamic code to highlight the influence of different correlations on annual energy needs.
22 February 2024 in Thermal Science and Engineering Progress