Ehab K. I. Hamad

Prof. Ehab K. I. Hamad

Aswan University, Aswān, Egypt
orcid

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 July 2022 in Electronics
Verified
Journal Article
Open access
PDF file
Sherif Abdalla KhaleelSherif Abdalla Khaleel
Sherif Abdalla Khaleel
EHEhab K. I. Hamad
Ehab K. I. Hamad
Naser Ojaroudi ParchinNaser Ojaroudi Parchin
Naser Ojaroudi Parchin
Mohamed A. SalehMohamed A. Saleh
Mohamed A. Saleh
6G wireless communications will be immersed in the future with different applications. It is expected to support all IoT services and satellite communications, and it is expected to support artificial intelligence (AI) and machine learning (ML). The THz frequency band has a vital role in 6G communication. In this study, a new graphene plasmonic two-port Terahertz (THz) MIMO antenna is analyzed by the characteristic mode theory (CMA), which gives a better insight into the physical behavior of the MIMO configurations. The proposed MIMO antenna is compact and designed on a Teflon substrate of 130 × 85 µm2. The antenna provides a wide impedance bandwidth of 0.6 THz (3.2–3.8 THz). The CMA is applied to clarify the position at which the mutual coupling gives a maximum concentrated current distribution. It is mainly used to reveal the preferable MIMO antenna configuration by the usage of the model significant and model current distribution property. To reduce the mutual coupling between the radiating elements, a complementary dumbbell-structure Metamaterial (MTM) unit cell is etched in the ground plane to block the coupling mode without any affection on the dominant mode. The preferred MIMO configuration gives high isolation of −55 dB between the radiating patches. The fundamental characteristics have been discussed in detail. The proposed MIMO design offers several attractive features such as large bandwidth of 0.6 THz, low envelope correlation coefficient (ECC) of 0.000168, compact size, stable radiation, high gain of 7.23 dB, and low channel capacity loss (CCL) of 0.006. The proposed MIMO design is suitable for different applications in the THz band according to the high-performance parameters such as biomedical applications, security scanning, sensing, IoT, and 6G high-speed wireless communication systems.

29 December 2022 in Electronics
Verified
Journal Article
Open access
PDF file
Sherif Abdalla KhaleelSherif Abdalla Khaleel
Sherif Abdalla Khaleel
EHEhab K. I. Hamad
Ehab K. I. Hamad
Naser Ojaroudi ParchinNaser Ojaroudi Parchin
Naser Ojaroudi Parchin
Mohamed Basheer SalehMohamed Basheer Saleh
Mohamed Basheer Saleh
The approaching sixth-generation (6G) communication network will modernize applications and satisfy user demands through implementing a smart and reconfigurable system with a higher data rate and wider bandwidth. The controllable THz waves are highly recommended for the instantaneous development the new technology in wireless communication systems. Recently, reconfigurable intelligent surfaces (RIS), also called codded/tunable programmable metasurfaces, have enabled a conspicuous functionality for THz devices and components for influencing electromagnetic waves (EM) such as beam steering, multi-beam-scanning applications, polarization variation, and beam focusing applications. In this article, we proposed a graphene plasmonic two-port MIMO microstrip patch antenna structure that operates at a 1.9 THz resonance frequency. An E-shape MTM unit cell is introduced to enhance the isolation of the antenna from −35 dB to −54 dB. An implementation of controllable and reconfigurable surfaces based on graphene meta-atoms (G-RIS) placed above the radiating patches with a suitable separated distance to control the radiated beam to steer in different directions (±60°). The reconfigurable process is carried out via changing the (ON/OFF) meta-atoms states to get a specific code with a certain beam direction. The gain enhancement of the antenna can be implemented through an artificial magnetic conductor (AMC) based on graphene material. The G-AMC layer is located underneath the (MIMO antenna, G-RIS layer) to improve the gain from 4.5 dBi to 10 dBi. The suggested antenna structure results are validated with different techniques CST microwave studio and ADS equivalent circuit model. The results have asymptotic values. So, the proposed design of the MIMO antenna that is sandwiched between G-RIS and G-AMC is suitable for IoT applications.

7 September 2018 in Frequenz
Verified
Journal Article
Closed access
PDF file
AAAhmed Abdelaziz
Ahmed Abdelaziz
EHEhab K. I. Hamad
Ehab K. I. Hamad
In this paper, a Tri-band microstrip-line-fed low profile microstrip patch antenna is proposed for future multi-band 5 G wireless communication applications. The proposed antenna is printed on a compact Rogers RT5880 substrate of dimensions 20×16.5×0.508 mm3 with relative permittivity, εr of 2.2 and loss tangent, tan δ of 0.0009. To improve return loss and bandwidth of the proposed antenna, a partial ground plane technique is employed. The proposed antenna operates at 10, 28, and 38 GHz, three of the selected frequencies which are allocated by the International Telecommunication Union (ITU) for 5 G mobile communications. To reduce interference between the 5 G system and other systems in the band, a pair of T-shaped slots is etched in the radiating patch to reject unwanted frequency bands. The proposed design provides a gain of 5.67 dB at 10 GHz, 9.33 dB at 28 GHz and 9.57 dB at 38 GHz; the radiation pattern is mostly directional. The proposed antenna is designed and optimized using two commercial 3D full-wave software, viz. CST microwave studio and Ansoft HFSS. A prototype of the designed antenna that was fabricated and showed good agreement between the actual measurements of S11 & VSWR and the simulation results using both software.

8 February 2021 in IEEE Access
Verified
Journal Article
Open access
Anwer AhmedAnwer Ahmed
Anwer Ahmed
EHEhab K. I. Hamad
Ehab K. I. Hamad
WSWael Swelam
Wael Swelam
AAA. M. M. A. Allam
A. M. M. A. Allam
MSMohamed fathy Abo sree
Mohamed fathy Abo sree
HMHesham A Mohamed
Hesham A Mohamed
In this paper, single-layer ultra-Wide Band (UWB) microstrip patch antennas loaded with asymmetrical U-shaped slot in both microwave and millimeter wave applications are presented. These novel antennas cover a fractional bandwidth around 40% in both microwave and millimeter applications. The applications cover the C-band (4–8) GHz, V-band (40–75) GHz, and W-band (75–110) GHz. In addition to that, it is the sole article that cover the bands (5.15–5.825) GHz and (8.025–8.4) GHZ for WiMaX and ITU band applications, respectively. Moreover, it covers three bands for Automotive radar applications within (71–76) GHz, (81–86) GHz, and (92–95) GHz, in addition to further 5G/mm-wave applications at 60 GHz. Each antenna is coaxial fed and implemented on a Roger 5880 substrate with relative dielectric constant of 2.2, thickness of $1.575~mm$ and loss tangent of 0.0009. They operate over the frequency band (5.5–9.5) GHz for microwave band and (55–95) GHz for mm-wave band. To achieve either a notch in other bands or develop a multi-band structure, the conventional ground is replaced by two different structures. The first ground is an array of patches and the other is a mushroom ground. The first ground results in a notch within the band (73–79) GHz while the second one achieves a multi-band within (55–68) GHz and (81–95) GHz. Both antennas are simulated and verified using Finite Difference Time-Domain analysis (FDTD); CST Microwave Studio and Finite Element Method (FEM); Ansoft HFSS. For microwave band, the antenna is fabricated and measured for verification. Concerning the mm-wave version, three different types of ground planes are presented; traditional, periodic structure of patches and mushroom. The structure with periodic patches conducts the same band as the traditional ground plane does. This is a prestep for the design of the notches. The mushroom ground is carried out for multi-band applications. The average gain of the antennas is 7 dB.The measured two dimensional cuts of the radiation pattern, radiation efficiency, and reflection coefficient of the microwave version are presented and are in good agreement with the simulated results while for the mm-wave antenna the same parameters are simulated with two different methods and are in good agreement.

7 September 2020 in International Journal of RF and Microwave Computer-Aided Engineering
Verified
Journal Article
Closed access
PDF file
AAAhmed abdalaziz
Ahmed abdalaziz
EHEhab K. I. Hamad
Ehab K. I. Hamad

7 May 2024 in Sensors
Verified
Journal Article
Open access
PDF file
Yasser A. ZenhomYasser A. Zenhom
Yasser A. Zenhom
EHEhab K. I. Hamad
Ehab K. I. Hamad
MAMohammed Alghassab
Mohammed Alghassab
MEMohamed M. Elnabawy
Mohamed M. Elnabawy
Visible Light Communication (VLC) systems are favoured for numerous applications due to their extensive bandwidth and resilience to electromagnetic interference. This study delineates various constructions of Optical Orthogonal Frequency Division Multiplexing (O-OFDM) approaches employed in VLC systems. Various factors are elaborated within this context to ascertain a more effective O-OFDM approach, including constellation size, data arrangement and spectral efficiency, power efficiency, computational complexity, bit error rate (BER), and peak-to-average power ratio (PAPR). This paper seeks to assess these approaches’ BER and PAPR performance across varying modulation orders. Regrettably, in VLC systems based on OFDM methodology, the superposition of multiple subcarriers results in a high PAPR. Therefore, this study aims to diminish the PAPR in VLC systems, enhancing system performance. We propose a non-distorting PAPR reduction technique, namely the Vandermonde-Like Matrix (VLM) precoding technique. The suggested technique is implemented across various O-OFDM approaches, including DCO-OFDM, ADO-OFDM, ACO-OFDM, FLIP-OFDM, ASCO-OFDM, and LACO-OFDM. Notably, this method does not affect the system’s data rate because it does not require the mandatory transmission of side information. Furthermore, this technique can decrease the PAPR without impacting the system’s BER performance. This study compares the proposed PAPR reduction technique against established methods documented in the literature to evaluate their efficacy and validity rigorously.