Ervins Blumbergs

Mr. Ervins Blumbergs

University of Latvia, Riga, Rīga, Latvia

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 January 2024 in Metals
Verified
Journal Article
Open access
PDF file
EBErvins Blumbergs
Ervins Blumbergs
Andrei ShishkinAndrei Shishkin
Andrei Shishkin
KMKarlis Markus
Karlis Markus
VSVera Serga
Vera Serga
DGDmitri Goljandin
Dmitri Goljandin
VPVladimir Pankratov
Vladimir Pankratov
Printed circuit boards (PCBs) make up 3 to 5% of all electronic waste. The metal content of spent PCBs can reach 40%. They usually contain valuable metals, such as Ag, Au, and Pd, as well as other metals such as Cu, Sn, Pb, Cd, Cr, Zn, Ni, and Mn. However, the metallic part of a whole PCB is 40–60% including the Cu layers between the fiberglass–polymer layers. The paper describes the economics of the valuable metal (Ag, Au, Pd)-containing concentrate preparation from a raw PCB. We considered the influence of the pre-treatment method of PCBs before the extraction of valuable metals on the extraction self-cost change. The disintegration method is based on the high-energy impact of the particles of the material to be ground, thus causing the separation of the metallic components of the PCB. In the course of the work, single and double direct grinding using the method of disintegration was studied. For the calculation, the test batch of 10,000 kg of two types of PCB was taken for estimation of the self costs and potential profit in the case of complete valuable metals (Ag, Au, Pd) plus Cu extraction. It was shown that from 10,000 kg of studied PCB, it is possible to obtain 1144 and 1644 kg of metal-rich concentrate, which should be further subjected to electro-hydrochlorination for metals leaching. The novelty of this research lies in the fact that a technical and economic analysis has been carried out on a newly developed combined technology for processing electronic waste. This included mechanical processing and electrochemical leaching with the help of the active chlorine that is formed in situ. The real (not specially selected or prepared) waste PCBs were used for the process’s economical efficiency evaluation. The main findings showed that despite the high content of Cu in the studied PCBs, the commercial value was insignificant in relation to the total income from the Ag, Au, and Pd sale. A correlation was established between the self-cost decrease after separative disintegration of PCBs by metal content increase (by specific metals such as Au, Ag, Pd, and Cu) with the metal potential yield after extraction.

15 November 2022 in Metals
Verified
Journal Article
Open access
PDF file
VSVera Serga
Vera Serga
Aleksej ZarkovAleksej Zarkov
Aleksej Zarkov
EBErvins Blumbergs
Ervins Blumbergs
Andrei ShishkinAndrei Shishkin
Andrei Shishkin
JBJanis Baronins
Janis Baronins
VPVladimir Pankratov
Vladimir Pankratov
Modern technologies for recycling electronic waste (e-waste) have high economic efficiency and environmental safety requirements. Among the existing technologies, hydrometallurgy is considered to be the most promising technology for e-waste recycling. Increasing attention paid to the chlorination method is associated with the complex recycling of low-grade ores containing noble metals and the raw materials of secondary polymetallic. In this paper, we propose a new scheme for leaching metals from computer printed circuit boards (PCBs) pre-crushed in a disintegrator: The processes of chlorine production and hydrochlorination are implemented in one reactor under the action of an alternating current (AC) of industrial frequency (50 Hz). Three fine fractions of raw material powders with particle size d < 90 µm, d = 90–180 µm, and d = 180–350 µm were used as research objects and the finest fraction of the raw material (d < 90 µm) was studied in more detail. It was found that complete leaching of gold is achieved from fractions of raw materials with a particle size d = 90–180 µm and d = 180–350 µm, containing 277 ppm and 67 ppm of the gold, respectively, at an experiment duration (tex) of 2 h, a current density (i) of 0.66 A·cm−2, and a solid/liquid (S/L) ratio of 8.6 g·L−1. Under the same conditions of the electrochemical leaching process from the fraction of raw materials with a particle size of d < 90 µm and a gold content of 824 ppm, the degree of metal leaching is 80.5%. At the same time, with an increase in particle size in the raw material fractions from d < 90 µm to d = 180–350 µm and a copper content in the raw material from 1.40% to 6.13%, an increase in the degree of its leaching from 81.6% to 95.2%, respectively, is observed. In the framework of the preliminary study presented in this work, for the finest raw material fraction with d < 90 μm the highest gold leaching degree (86.3%) was achieved under the following experimental conditions: tex= 4 h, CHCl = 6 M, i = 0.88 A·cm–2, S/L ratio—8.6 g·L–1 and the highest copper leaching degree (94.2%) was achieved under the following experimental conditions: tex = 2 h, CHCl = 6 M, i = 0.64 A·cm–2, and S/L ratio—2.9 g·L–1.

23 August 2022 in Preprints.org
Verified
Preprint
Open access
PDF file
EBErvins Blumbergs
Ervins Blumbergs
VSVera Serga
Vera Serga
ASAndrei Shishkin
Andrei Shishkin
DGDmitri Goljandin
Dmitri Goljandin
ASAndrej Shishko
Andrej Shishko
VPVladimir Pankratov
Vladimir Pankratov
Various metals and semiconductors containing Printed Circuit Boards (PCBs) are abundant in any electronic device equipped with controlling and computing features. These devices inevitably constitute E-waste after the end of service life. The typical construction of PCBs includes mechanically and chemically resistive materials, which significantly reduce the reaction rate or even avoid accessing chemical reagents (dissolvents) to target metals. Additionally, the presence of relatively reactive polymers and compounds from PCBs requires high energy consumption and reactive supply due to the formation of undesirable and sometimes environmentally hazardous reaction products. Preliminarily milling PCBs into powder is a promising method for increasing the reaction rate and avoiding liquid and gaseous emissions. Unfortunately, current state-of-the-art milling methods also lead to the presence of significantly more reactive polymers still adhered to milled target metal particles. This paper aims to find a novel single and two-stage disintegration-milling approach that can provide the formation of metal-rich particle size fractions. The morphology, particle fraction sizes, bulk density, and metal content in produced particles were measured and compared. Research results show the highest bulk density (up to 6.8 g·cm-3) and total metal content (up to 95.2 wt. %) in finest sieved fractions after the single-step milling of PCBs. Therefore, the concentrations of about half tested metallic elements are higher in the single milled specimen and with lower adhered plastics concentrations, as compared to double milled specimens.

6 October 2022 in Preprints.org
Verified
Preprint
Open access
PDF file
VSVera Serga
Vera Serga
Aleksej ZarkovAleksej Zarkov
Aleksej Zarkov
EBErvins Blumbergs
Ervins Blumbergs
Andrei ShishkinAndrei Shishkin
Andrei Shishkin
JBJanis Baronins
Janis Baronins
VPVladimir Pankratov
Vladimir Pankratov
Modern technologies for recycling electronic waste (e-waste) impose high economic efficiency and environmental safety requirements. Among existing technologies, hydrometallurgy is considered the most promising technology for e-waste recycling. Increasing attention to the chlorination method is associated with the complex recycling of low-grade ores containing noble metals and secondary polymetallic raw materials. In this paper, we propose a new scheme for leaching metals from computer printed circuits (PCBs) pre-crushed in a disintegrator: the processes of chlorine production and hydrochlorination are implemented in one reactor under the action of alternating current (AC) of industrial frequency (50 Hz). It was found that complete leaching of gold is achieved from fine fractions of raw materials containing 0.03% and 0.01% of the gold at an experiment duration of 2 hours, a current density of 0.66 A·cm-2, and a solid/liquid ratio of 8.6 g·L-1. Under the same conditions of the electrochemical leaching process from the fraction of raw material with a gold content of 0.08%, the degree of metal leaching is 80.5%. At the same time, with an increase in the copper content in the raw material from 1.40% to 6.13%, an increase in the degree of its leaching from 84.6% to 95.2%, respectively, is observed. These results will serve as a foundation for developing a complex technology for recovering valuable metals from PCBs.

27 March 2023 in Metals
Verified
Journal Article
Open access
PDF file
VSVera Serga
Vera Serga
Aleksej ZarkovAleksej Zarkov
Aleksej Zarkov
Andrei ShishkinAndrei Shishkin
Andrei Shishkin
EEEdgars Elsts
Edgars Elsts
MMMaksims Melnichuks
Maksims Melnichuks
VPVladimir Pankratov
Vladimir Pankratov
This paper presents the results of the leaching of metals from computer PCBs by electrochemical hydrochlorination using alternating current (AC) with an industrial frequency (50 Hz). Leaching was carried out with a disintegrator-crushed computer motherboard with a particle size (d) of <90 μm. In the course of the research, the leaching efficiency of metals including Fe, Sn, Mn, Al, Cu, Zn, Pb, Ni, Ti, Sb, Cr, Co and V was evaluated depending on process parameters, such as AC density, experiment duration, hydrochloric acid concentration in the electrolyte solution, solid/liquid ratio, electrolyte temperature, and the loading option of raw material (loading option 1 involving loading into the electrolyte solution, and loading option 2 involving loading into the filter containers attached to electrodes). The research results showed that AC superimposition significantly intensifies the leaching of metals. It was established that the complete leaching of metals including Al, Mn, Sn, Ti and Zn, under experimental conditions (loading option 2, CHCl = 6 mol·L−1, i = 0.80 A·cm−2, S/L = 8.6 g·L−1), is reached after 1.5 h, and that of Cu and Ni is reached after 2 h from the beginning of the experiment. At the same time, the degree of leaching of other metals after 2 h is Co-78.8%, Cr-84.4%, Sb-91.7%, Fe-98.9%, V-98.1% and Pb-5.1%. The paper also reports the results on the leaching of all abovementioned metals, as well as Ag and Pd, with disintegrator-crushed mixed computer PCBs with d < 90 μm and loading option 1.