Starch-based materials seem to be an excellent alternative for conventional plastics used in various applications. Microfibralted cellulose can be used to improve the surface properties of starch-based materials. This study aims to analyze the surface properties of starch-microfibrillated cellulose materials. The surface properties of films were evaluated by ATR-FTIR, surface roughness, water wettability, and surface free energy. The surface homogeneity between corn starch and microfibrillated cellulose (MFC) fibers was confirmed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Microscopic analyses of the film surfaces confirm good compatibility of starch and MFC. The addition of MFC increased the surface roughness and polarity of developed starch/MFC materials. The surface roughness parameter has increased from 1.44 ± 0.59 to 2.32 ± 1.13 for pure starch-based materials and starch/MFC material with the highest MFC content. The WCA contact angle has decreased from 70.3 ± 2.4 to 39.1 ± 1.0°, while the surface free energy is 46.2 ± 3.4 to 66.2 ± 1.5 mJ·m−2, respectively. The findings of this study present that surface structure starch/MFC films exhibit homogeneity, which would be helpful in the application of MFC/starch materials for biodegradable packaging purposes.
6 April 2023 in Continuum Mechanics and Thermodynamics
The main aim of the work was the experimental and numerical analysis of the energy absorption/dissipation capabilities and failure mechanisms of novel hyper-elastic target material intended for ballistic applications including layers of composite armors, projectile catching systems and anti-ricochet layers covering walls of shooting ranges, ballistic tunnels, etc. Static and dynamic mechanical properties of the material were analyzed at both room and elevated temperatures ( $$40\div 80\,^{\circ }\hbox {C}$$ ). Numerical models of the material and $$7.62\times 25$$ mm FMJ projectile were defined. Simulations of the hyper-elastic target penetration with the projectile were carried out. The differences between the results obtained numerically and experimentally were determined (measured as a relative error) and were lower than 15% what testified about proper definition of the numerical models of the analyzed phenomenon components.
13 November 2023 in Journal of Orthopaedic Reports
In this paper, we present a novel theoretical model of bone evolution. The model takes into account growth of the blood vessels network as a real issue during the process. The stimulation of this growth is controlled by the signals from overloaded dying cells. A system of integro-differential equations describes changes in the density of blood vessels, bone cells and Young modulus, all of which define how the bone tissue evolves over time. The model considers several biomechanical signals such as changes in the density of elastic strain energy and nutrients. Two examples of changing bone tissue were examined to test the model: bone healing around a tooth implant and formation of osteophytes during osteoarthritis. In both cases, the effects of mechanical loading in the bone tissue evolution which are in agreement with the medical observations can be observed.
Osteoarthritis (OA) is an extremely complex disease, as it combines both biological-chemical and mechanical aspects, and it also involves the entire joint consisting of various types of tissues, including cartilage and bone. This paper describes the methods of conducting cell cultures aimed at searching for the mechanical causes of OA development, therapeutic solutions, and methods of preventing the disease. It presents the systems for the cultivation of cartilage cells depending on the level of their structural complexity, and taking into account the most common solutions aimed at recreating the most important factors contributing to the development of OA, that is mechanical loads. In-vitro systems used in tissue engineering to investigate the phenomena associated with OA were specified depending on the complexity and purposefulness of conducting cell cultures.