A new design method that greatly enhances the reflectivity bandwidth and angular stability beyond what is possible with a simple Salisbury screen is described. The performance improvement is obtained from a frequency selective surface (FSS) which is sandwiched between the outermost 377 Ω/square resistive sheet and the ground plane. This is designed to generate additional reflection nulls at two predetermined frequencies by selecting the size of the two unequal length printed dipoles in each unit cell. A multiband Salisbury screen is realised by adjusting the reflection phase of the FSS to position one null above and the other below the inherent absorption band of the structure. Alternatively by incorporating resistive elements midway on the dipoles, it is shown that the three absorption bands can be merged to create a structure with a −10 dB reflectivity bandwidth which is 52% larger and relatively insensitive to incident angle compared to a classical Salisbury screen having the same thickness. CST Microwave Studio was used to optimise the reflectivity performance and simulate the radar backscatter from the structure. The numerical results are shown to be in close agreement with bistatic measurements for incident angles up to 40° over the frequency range 5.4−18 GHz.
This paper presents a thorough review of the techniques involved in the enhancement of the efficiency performance of the reflectarray antenna. The effect of the selection of a suitable patch element or a proper feeding mechanism on efficiency improvement is studied in detail. Reflectarray loss quantification is examined in relation to the design techniques involved in the efficiency improvement. A low loss patch element with a wide reflection phase range and a properly illuminated reflectarray aperture are supposed to offer high efficiency performance. Additionally, the placement, the orientation and the position of a patch element on the reflectarray surface can also affect its efficiency performance. Mathematical equations were developed to estimate the efficiencies of circular and square aperture reflectarray antennas by considering their feed footprints. Moreover, a step by step practical method of predicting and measuring the total efficiency of a reflectarray antenna is presented. The two selected apertures of the reflectarray consisting of the square patch element configuration are fabricated and measured at a frequency of 26 GHz. Their measured efficiencies have been estimated using the derived equations, and the results were compared and validated using the efficiencies obtained by the conventional gain-directivity relation.
1 April 2008 in Journal of Atmospheric and Solar-Terrestrial Physics
The radar absorbing properties of a Salisbury screen are investigated for a structure which is constructed using a high impedance ground plane. Simulated and experimental results in the frequency band 8–12 GHz show that this physical arrangement can be used to obtain a significant reduction in the physical thickness of the absorber when the specified −10 dB reflectivity bandwidth is in the range 18–37%
1 January 2019 in Progress In Electromagnetics Research Letters