We demonstrate a hundred micro-Joules level femtosecond laser system based on a compact and simple two-stage Yb:YAG single crystal fiber chirped pulse amplification system which delivers compressed power of 15.57 W, pulse width of 715 fs. The different amplification performance with different input seed power is experimentally studied. A maximum direct amplified power output of 44 W at 100 kHz is obtained for an input seed power of 12 W. To the best of our knowledge, this is the highest average power of femtosecond laser based on single crystal fiber at hundred micro-Joules energy level.

An all-fiber low-repetition-rate SESAM mode-locked fiber oscillator combined with a dispersion-managed active fiber loop produces a flexible GHz burst-mode laser source. The high-power output is then produced by amplifying the GHz burst-mode laser source using an all-fiber chirped-pulse amplification system. Then, the laser is compressed using a grating pair compressor; a maximum amplified power of 97 W is obtained. This results in a compressed high power of 82.07 W with a power stability RMS of 0.09% and beam quality better than 1.2. Accurate dispersion control allows for the production of a high-quality pulse duration of 265 fs.

We demonstrate a strictly all-polarization maintaining, all-fiber chirped pulse amplification of ultrashort pulses. Pulses with the duration of 933 fs and energy as high as 50 μJ are achieved at 200 kHz repetition rate in a compact size. The variations of the spectra and pulse widths as functions of the amplified output power have also been presented. To our best knowledge, this is the highest energy extracted from the strictly all-fiber chirped pulse amplification system. The environmentally stable femtosecond laser source will find various applications in practice.

A hybrid chirped pulse amplification system composed by the monolithic fiber pre-amplifier and a two-stage single-pass single crystal fiber amplifier was demonstrated. A maximum power of 68 W at the repetition rate of 100 kHz was obtained. The laser pulses were amplified and then compressed using a 1600 line/mm grating pair compressor. A short pulse duration of 358 fs and a power of 54 W were obtained at 100 kHz, corresponding to a peak power of 1.508 GW, to the best of our knowledge, this is the highest peak power ever obtained from single crystal fiber at repetition rate above 100 kHz due to the consideration of the third order dispersion which was engraved in the stretcher and the tuning capacity of higher-order dispersion compensation of chirped fiber Bragg grating. Additionally, the beam quality better than 1.3 was obtained. This high peak power CPA system with excellent comprehensive parameters will find various applications in scientific research and industrial applications.