The Journal of the Korean Wood Science and Technology (JKWST) launched in 1973 as an official publication of the Korean Society of Wood Science and Technology has been served as a core of knowledges on wood science and technology.
1 December 2020 in Nanotechnology, Science and Applications
Introductions: Ultrasonication can be used to synthesize nanosilica from silica derived from betung bamboo sticks and leaves. This study aimed to synthesize nanosilica from betung bamboo sticks and leaves by the use of ultrasonication and to characterize the nanosilica produced. Methods: The main materials used in this study were bamboo sticks and leaves. Betung bamboo sticks and leaves were sun-dried and then burned separately without adding fuel to produce charcoal. Then the produced charcoal was burned at a temperature of 700°C for 6 hours in a furnace to produce ash. Silica was extracted from furnace ash using reflux methods. The production of nanosilica from the silica derived from the betung bamboo sticks and leaves was carried out using ultrasonication. Results: The yield of silica from sticks and leaves was based on ash dry weight 45.73% and 79.93%, respectively. The nanosilica derived from betung bamboo sticks had a particle size in the range of 169.87– 1479.50 nm, with an average size of 502.35 nm and a particle dispersion index value of 0.1420. Nanosilica derived from betung bamboo leaves had a particle size in the range of 234.49– 851.36 nm, with an average size of 472.67 nm and a particle dispersion index value of 0.0670. Scanning electron microscopy analysis showed that silica from betung bamboo sticks and leaves still agglomerated. The particle size of silica could minimize through ultrasonication to synthesize nanosilica. Discussions: X-ray diffraction analysis showed that the structure of nanosilica differed from that of silica, and it appeared to be semicrystalline. The ultrasonication method for the synthesis of nanosilica derived from betung bamboo sticks and leaves ash can produce nanosilica that has a semicrystalline phase. The use of surfactants in the process can make the size of the nanosilica particles more uniform and reduce the size of the nanoparticles produced.
13 September 2019 in Journal of Adhesion Science and Technology
The surface free energy (SFE) of woods and their wettability are important characteristic for wood painting. No information is available regarding the SFE and wettability of Indonesian tropical woods. The purpose of the study was to determine the SFE and wettability of 10 Indonesian tropical woods. The woods tested in this study were fast-growing species from plantation of teak, sengon, jabon, pine, and species from natural forest of ramin, meranti, mahagony, camphor, keruing, and ebony. Surface roughness was measured by a profilometer, while wettability was determined by sessile drop method. The SFE values were calculated based on the Rabel method. Wettability was characterized by constant contact angle change rate (K) using the Shi and Gardner (S/G) model. The results showed that the mean roughness (Ra) value of fast-growing species from plantation was 13.58 μm and of species from natural forest was 10.73 μm. The SFE of woods varied from 36.00 mJ/m2 in the Meranti to 69.68 mJ/m2 in the Sengon. It was observed that the Meranti wood with the lowest value of SFE provided the lowest value of K (0.01) which indicated the poorest in wettability. The Sengon wood with the highest value of K (0.06) should provide the best wettability for the acrylic paint.
Sengon (Falcataria moluccana Miq.) is one of the fastest growing wood that is broadly planted in Indonesia. Sengon wood has inferior wood properties, such as a low density and dimensional stability. Therefore, sengon wood requires a method to improve its wood quality through wood modification. One type of wood modification is wood impregnation. On the other hand, Betung Bamboo leaves are considered as waste. Betung Bamboo leaves contain silica. Based on several researches, nano-SiO2 could improve fast-growing wood qualities. According to its perfect solubility in water, monoethylene glycol (MEG) is used in the study. The objectives are to evaluate the impregnation treatment (MEG and nano-silica originated from betung bamboo leaves) in regard to the dimensional stability and density of 5-year-old sengon wood and to characterize the treated sengon wood. MEG, MNano-Silica 0.5%, MNano-Silica 0.75%, and MNano-Silica 1% were used as impregnation solutions. The impregnation method was started with 0.5 bar of vacuum for 60 min, followed by 2.5 bar of pressure for 120 min. The dimensional stability, density, and characterization of the samples were studied through the use of scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy, X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The results show that the treatment had a significant effect on the dimensional stability and density of sengon wood. Alterations in the morphology of treated sengon wood were observed through the full coverage of the pits on the vessel walls (SEM analysis results) and the detection of ethylene (FTIR analysis results) and silica (XRD and FTIR analysis results). Overall, the 0.75% MNano-Silica treatment was the most optimal treatment for increasing the dimensional stability and density of 5-year-old sengon wood.
Penelitian ini bertujuan untuk menganalisis kesesuaian material kayu yang digunakan pada konstruksi eksterior di lingkungan tropis dengan mempertimbangkan fungsi structural, karakteristik material, serta tingkat paparan terhadap lingkungan. Metode yang digunakan adalah pendekatan deskriptif kualitatif melalui observasi visual pada beberapa objek bangunan berbasis kayu, meliputi rumah tinggal, kafe semi-terbuka, gazebo, dan monumen. Data dikumpulkan melalui dokumentasi dan identifikasi elemen konstruksi, kemudian diklasifikasikan berdasarkan jenis kayu, fungsi elemen, dan kesesuaian penggunaannya. Hasil penelitian menunjukkan bahwa kayu dengan kelas kuat dan keawetan tinggi, seperti ulin (E. zwageri) dan bengkirai (Shorea laevis), dominan digunakan pada elemen struktural utama yang terpapar langsung oleh lingkungan luar, seperti kolom, balok, dan lantai decking. Sementara itu, kayu kelas sedang seperti meranti (Shorea spp.) dan kamper (Dryobalanops aromatica) lebih banyak digunakan pada elemen nonstruktural atau semi-eksterior dengan tingkat paparan yang lebih rendah. Selain itu, material alternatif seperti bambu dan kayu ringan digunakan pada elemen sekunder dengan pertimbangan efisiensi dan kemudahan konstruksi. Penelitian ini menegaskan bahwa kesesuaian material kayu pada konstruksi eksterior ditentukan oleh interaksi antara sifat material, fungsi struktural, dan tingkat eksposur lingkungan. Studi ini memberikan dasar konseptual dalam pemilihan material kayu berbasis performa untuk mendukung konstruksi yang adaptif dan berkelanjutan di wilayah tropis
Karakteristik anatomi dan sifat fisis dari kayu merupakan karakteristik fundamental yang diperlukan untuk menentukan kualitas dari suatu jenis kayu. Penelitian ini bertujuan untuk mengetahui informasi mengenai struktur anatomi dan sifat fisis dari kayu teras Afrika (Maesopsis eminii Engl.). Dalam penelitian ini dilakukan pengamatan makroskopis dan mikroskopis kayu yang meliputi warna, jari-jari, panjang serat, diameter serat, diameter lumen, tebal dinding sel, dan diameter pori, serta nilai turunan dimensi serat (felting power, runkle ratio, flexibility ratio, coefficient rigidity, dan muhlsteph ratio). Selain itu, sifat fisis yang diteliti adalah kadar air, kerapatan, berat jenis, dan susut dimensi kayu (longitudinal, radial, dan tangensial). Hasil penelitian menunjukkan kayu teras Afrika memiliki warna kuning gelap hingga kecokelatan dan memiliki pori berbentuk bulat hingga oval yang dominan soliter dengan susunan tata baur. Berdasarkan nilai turunan dimensi seratnya, serat kayu teras Afrika tergolong ke dalam kelas kuat II. Sifat fisis kayu teras Afrika menunjukkan bahwa kayu teras Afrika akan menyusut ketika kadar air sudah mencapai < 14.41%.