Oleksij Fomin

Prof. Oleksij Fomin

State University of Infrastructure and Technology
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 February 2024 in Renewable Energy
Verified
Journal Article
Closed access
SSSergii V. Sagin
Sergii V. Sagin
SSSergii S. Sagin
Sergii S. Sagin
Oleksij FominOleksij Fomin
Oleksij Fomin
OGOleksandr Gaichenia
Oleksandr Gaichenia
YZYurii Zablotskyi
Yurii Zablotskyi
PKPavel Kučera
Pavel Kučera

Verified
Journal Article
Open access
PDF file
RVRoman Varbanets
Roman Varbanets
Oleksij FominOleksij Fomin
Oleksij Fomin
Václav PíštěkVáclav Píštěk
Václav Píštěk
VKValentyn Klymenko
Valentyn Klymenko
DMDmytro Minchev
Dmytro Minchev
PKPavel Kučera
Pavel Kučera
The article presents the acoustic method of marine low-speed engine turbocharger parameter estimation under operating conditions when a prompt assessment of instantaneous turbocharger speed and rotor vibration level is required. The method lies in the analysis of the acoustic signal that is generated by the compressor of the turbocharger with the diesel engine running under load. The spectral analysis reveals that the compressor blades generate acoustic oscillations that are always present in the overall acoustic spectrum of the turbocharger regardless of its technical condition. The harmonic components corresponding to the blades can be detected in the spectrum using the limit method. The calculated instantaneous turbocharger speed makes it possible to analyze the main harmonic amplitude in the spectrum. The method presented in this paper helps eliminate discrete Fourier transform (DFT) spectral leakage so that the amplitude of the main harmonic can be estimated. Further analysis of the amplitude of the main harmonic allows for efficient estimation of the turbocharger rotor vibration level when in operation. The method can be practically applied by means of a smartphone or a computer that has the dedicated software installed. The proposed method lays the foundations for a permanent monitoring system of turbocharger speed and vibration in industrial and marine diesel engines.

Verified
Journal Article
Open access
PDF file
SSSergii Sagin
Sergii Sagin
OKOleksiy Kuropyatnyk
Oleksiy Kuropyatnyk
ASArsenii Sagin
Arsenii Sagin
ITIvan Tkachenko
Ivan Tkachenko
Oleksij FominOleksij Fomin
Oleksij Fomin
PKPavel Kučera
Pavel Kučera
The features of the operation of the drillship-type vessels in special ecological regions of Northern Europe are considered. The main gap in the study of these systems is to determine the optimal degree of recirculation. The requirements of the International Maritime Organization for the emission of nitrogen oxides from the exhaust gases of marine diesel engines are given. The aim of the study is to determine the optimal degree of recirculation of exhaust gases of a 16V32 STX-MAN marine diesel. During the research, the optimal degree of exhaust gas recirculation varied in the range of 0–21%, the load on the diesel—in the range of 35–95% of the rated power. It was established that in this case, the emission of nitrogen oxides decreases up to 7.7–33.6%, the specific fuel consumption increases up to 0.2–3.5%. It was also found that the use of gas recirculation in the range of 18–21% at loads of 35–55% leads to a critical increase in exhaust gas temperature. It is advisable to use exhaust gas recirculation in the range of 6–15% to ensure the environmental friendliness of the operation of the drillships. In these modes, the maximum reduction in nitrogen oxide emissions is ensured with a minimum increase in specific fuel consumption. Future studies should be directed at the development of the criteria for the environmental stability of sea vessels.

15 September 2018 in International Journal of Engineering & Technology
Verified
Journal Article
Open access
PDF file
Oleksij FominOleksij Fomin
Oleksij Fomin
OLOleksandr Logvinenko
Oleksandr Logvinenko
OBOleksiy Burlutsky
Oleksiy Burlutsky
ARAndriy Rybin
Andriy Rybin
Railway transport is the foundation of the transport complex and part of the transport network of logistics chains. However, significant deterioration of rolling stock units (especially freight cars accounting for the greater part of all transportation) is an urgent problem of the rail industry. Therefore, the problems of renovation of the existing freight car fleet by developing and introducing domestic models which can effectively compete in terms of the technical and economic and operational indexes are of crucial importance. But the car structure suffers from various deformations at all service stages (production, maintenance and operation). The main type of these deformations is residual ones developing during the welding procedure, due to the thermal effect. Therefore, the issues concerning elimination of these deformations in production and maintenance are becoming ever more urgent. In particular, the most recognized and economy-oriented approach in the field is the one based on the thermal leveling of welded structures. The implementation of this approach requires some research aimed at scientific substantiation of the thermal leveling, as well as, specification of forms and heating temperatures, determination of heating form sizes, thermal leveling simulation and experimental verification of the results, optical microscopy and determination of mechanical characteristics.

18 August 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Alyona LovskaAlyona Lovska
Alyona Lovska
Oleksij FominOleksij Fomin
Oleksij Fomin
Václav PíštěkVáclav Píštěk
Václav Píštěk
PKPavel Kučera
Pavel Kučera
The development of foreign economic activity of the Eurasian states led to the introduction of rail and ferry transportation. It is important to note that the current normative documentation does not fully cover the issues of transporting combined trains by sea. This can lead to a violation of the traffic safety of both the railway ferry and the transport of containers as part of combined trains by sea. In this connection, we investigated the dynamic loading of a container as part of a combined train when transported by a railway ferry. To ensure the stability of the container relative to the frame, we suggested an improvement of the load-bearing structure of a flat wagon. Additionally, we suggested the use of a viscous linkage between containers with the aim of reducing their dynamic load. To justify the suggested solutions, we carried out a mathematical modelling of the container dynamic load. The calculation was performed in MathCad. Due to the fact that the container has its own degree of freedom when transported by sea, the accelerations were separately determined for the supporting structure of the flat wagon and for the container. We found that the total amount of acceleration that acted on the container was 3.57 m/s2 (0.36 g) and on the load-bearing structure of the wagon was 2.47 m/s2 (0.25 g) which were, respectively, 38% and 23% less than the acceleration values in the typical scheme of their interaction. To determine the fields of acceleration distribution relative to the load-bearing structure of a flat wagon with containers, we carried out computer modelling of their dynamic load. The maximum percentage of discrepancy between the accelerations obtained by mathematical and computer modelling was 17.7%. The study will contribute to the creation of recommendations for the safe transport of combined trains by sea, as well as to increasing the efficiency of combined transport through international transport corridors.

28 November 2019 in Vibroengineering PROCEDIA
Verified
Journal Article
Open access
PDF file
Oleksij FominOleksij Fomin
Oleksij Fomin
Alyona LovskaAlyona Lovska
Alyona Lovska
Václav PíštěkVáclav Píštěk
Václav Píštěk
PKPavel Kučera
Pavel Kučera
The article presents result of computational modelling of container dynamic load during transportation as a part of trains of intermodal transport on a railway ferry. The computational models were developed which account the movement of the container with regard to the frame of the flat wagon while moving of the railway ferry. It was assumed that there is no movement of the flat wagon with regard to the deck, since these movements were limited by fastening means. The obtained acceleration rates, as components of the dynamic loads acting on the container, were accounted while determining the containers stability coefficient with regard to the flat wagons. The railway ferry heeling angles which ensure the stability of the containers were determined. The researches will ensure safety of transportation of containers as a part of trains of intermodal transport on a railway ferry, as well as increase the efficiency of operation of intermodal transport in the international transport.