Titanium alloys are widely used in aerospace, the military industry, electronics, automotive fields, etc., due to their excellent properties such as low density, high strength, high-temperature resistance, and corrosion resistance. Many components need to be finished precisely after being cut in these applications. In order to achieve high-quality and high-efficiency finishing of titanium alloys, ultrasonic-assisted magnetic abrasive finishing (UAMAF) was introduced in this research. The machining performance for UAMAF of a titanium alloy was studied by experimentally comparing UAMAF and magnetic abrasive finishing (MAF). The results show that the cutting force of UAMAF can reach 2 to 4 times that of MAF, and it decreases rapidly with the increase in the machining gap due to the energy loss of ultrasonic impact in the transmission between magnetic abrasives. The surface roughness of UAMAF can reach about Ra 0.075 μm, which is reduced by about 59% compared with MAF. The main wear type of the magnetic abrasive is that the diamond grits fell off the magnetic abrasive in both UAMAF and MAF. The uniform wear of the magnetic abrasive is realized, and the utilization ratio of the magnetic abrasive is obviously improved in UAMAF.
For material fracture and severe wear in braking conditions, the discrete element method (DEM) is used to simulate the wear process of the braking interface explicitly. Based on the central difference method, particle motion equations are established considering the influence of elemental damping on particle contact. Combined with the Particle Flow Code (PFC) software, a DEM wear model of the braking interface is established using the parallel bond modeling method. The braking wear process is simulated, and the material damage process is investigated. The simulation results demonstrate that with the increase of the initial braking load and the initial braking speed, the wear depth increased by 24.75% and 16.22%, respectively. The increase in the number of detached particles leads to an increasing trend of fracture force chains, which increases the thickness of the flowing particle layer, revealing the micro-wear mechanism of the braking interface.
Due to the limited availability of fault samples and the expensive nature of marking fault samples in Electric Multiple Unit (EMU) gearbox monitoring data, a study was conducted to simulate the degradation process of key components in the CRH5 gearbox using rigid–flexible coupling dynamics. Vibration acceleration data from the simulation were utilized to create a six-dimensional hybrid feature domain representing the degradation process. By leveraging the capabilities of the Hidden Markov Model (HMM) for handling hidden transitive probabilities in temporal data and Gated Recurrent Unit (GRU) for addressing long-distance and high-dependence temporal data, a GRU-HMM fault prediction model was developed. This model was validated using monitoring data and the six-dimensional hybrid feature domain from the CRH5 gearbox and compared against actual maintenance records. The findings indicated that the GRU-HMM fault prediction model can effectively recognize the degradation patterns of multiple components, offering higher accuracy in fault prediction compared to traditional models. These research outcomes are expected to optimize EMU maintenance schedules based on usage conditions, enhance EMU utilization rates, and reduce operational and maintenance costs, thereby providing valuable theoretical support.
28 June 2025 in International Journal of Precision Engineering and Manufacturing