In this study, an external light extraction layer with a micro-nano hybrid structure was applied to improve the external light extraction efficiency of organic light-emitting diodes (OLEDs). A reactive ion-etching (RIE) process, using O2 and CHF3 plasma, was performed on the surface of the micro-scale pattern to form micro-nano hybrid structures. According to the results of this study, the nanostructures formed by the treatment of O2 and CHF3 were different, and the efficiency according to the structures was analyzed experimentally and theoretically. As a result, the OLED, to which the micro-nano hybrid structure, manufactured through a simple process, is applied, improved the external light extraction efficiency by up to 38%, and an extended viewing angle profile was obtained. Additionally, an effective method for enhancing the out-coupling efficiency of OLEDs was presented by optimizing the micro-nano hybrid structure according to process conditions.
In this study, we fabricated a random nanostructure (RNS) external light extraction composite layer containing high-refractive-index nanoparticles through a simple and inexpensive solution process and a low-temperature mask-free process. We focused on varying the shape and density of the RNSs and adjusted the concentration of the high-refractive-index nanoparticles to control the optical properties. The RNSs fabricated using a low-temperature mask-free process can use the distance between the nanostructures and various forms to control the diffraction and scattering effects in the visible light wavelength range. Consequently, our film exhibited a direct transmittance of ~85% at a wavelength of 550 nm. Furthermore, when the RNSs’ composite film, manufactured using the low-temperature mask-free process, was applied to organic light-emitting diodes (OLEDs), it exhibited an external quantum efficiency improvement of 32.2% compared with the OLEDs without the RNSs. Therefore, the randomly distributed high-refractive-index nanoparticles on the polymer film can reduce the waveguide mode and total reflection at the substrate/air interface. These films can be used as a scattering layer to reduce the loss of the OLED substrate mode.