In this study, an external light extraction layer with a micro-nano hybrid structure was applied to improve the external light extraction efficiency of organic light-emitting diodes (OLEDs). A reactive ion-etching (RIE) process, using O2 and CHF3 plasma, was performed on the surface of the micro-scale pattern to form micro-nano hybrid structures. According to the results of this study, the nanostructures formed by the treatment of O2 and CHF3 were different, and the efficiency according to the structures was analyzed experimentally and theoretically. As a result, the OLED, to which the micro-nano hybrid structure, manufactured through a simple process, is applied, improved the external light extraction efficiency by up to 38%, and an extended viewing angle profile was obtained. Additionally, an effective method for enhancing the out-coupling efficiency of OLEDs was presented by optimizing the micro-nano hybrid structure according to process conditions.
Electromagnetic absorbers combining ultrathin profiles with robust absorptivity across wide incidence angles are essential for applications such as stealth applications, wireless communications, and quantum computing. Traditional designs, including Salisbury screens, typically require thicknesses of at least a quarter-wavelength (), restricting their use in compact systems. While metamaterial absorbers (MMAs) offer reduced thicknesses, their absorptivity generally decreases under oblique incidence conditions. Here, we introduce an adjoint optimization-based inverse design method that merges the ultrathin advantage of MMAs with the angle-insensitive characteristics of Salisbury screens. By leveraging the computational efficiency of the adjoint method, we systematically optimize absorber structures as thin as . The optimized structures achieve absorption exceeding 90% at the target frequency (7.5 GHz) and demonstrate robust performance under oblique incidence, maintaining over 90% absorption up to 50°, approximately 80% at 60°, and around 70% at 70°. Comparative analysis against particle swarm optimization further highlights the superior efficiency of the adjoint method, reducing the computational effort by approximately 98%. This inverse design framework thus provides substantial improvements in both the performance and computational cost, offering a promising solution for advanced electromagnetic absorber design.
In this study, we fabricated a random nanostructure (RNS) external light extraction composite layer containing high-refractive-index nanoparticles through a simple and inexpensive solution process and a low-temperature mask-free process. We focused on varying the shape and density of the RNSs and adjusted the concentration of the high-refractive-index nanoparticles to control the optical properties. The RNSs fabricated using a low-temperature mask-free process can use the distance between the nanostructures and various forms to control the diffraction and scattering effects in the visible light wavelength range. Consequently, our film exhibited a direct transmittance of ~85% at a wavelength of 550 nm. Furthermore, when the RNSs’ composite film, manufactured using the low-temperature mask-free process, was applied to organic light-emitting diodes (OLEDs), it exhibited an external quantum efficiency improvement of 32.2% compared with the OLEDs without the RNSs. Therefore, the randomly distributed high-refractive-index nanoparticles on the polymer film can reduce the waveguide mode and total reflection at the substrate/air interface. These films can be used as a scattering layer to reduce the loss of the OLED substrate mode.
We report the electroluminescence (EL) characteristics of blue ultra-thin emissive layer (U-EML) phosphorescent (PH) organic light-emitting diodes (OLED) and thermally activated delayed fluorescence (TADF) OLED. A variety of transport layer (TL) materials were used in the fabricated OLEDs. The well-known FIrpic and DMAC-DPS were used with a thickness of 0.3 nm, which is relatively thicker than the optimal thickness (0.15 nm) of the blue phosphorescent ultra-thin emissive layer to ensure sufficient energy transfer. While FIrpic showed overall high efficiency in various TLs, DMAC-DPS exhibited three times lower efficiency in limited TLs. To clarify/identify low efficiency and to improve the EL, the thickness of DMAC-DPS was varied. A significantly higher and comparable efficiency was observed with a thickness of 4.5 nm, which is 15 times thicker. This thickness was oriented from the TADF itself, which reduces quenching in a triplet–triplet annihilation compared to the PH process. The thinner optimal thickness compared with ~30 nm of fluorescent OLEDs suggests that there still is quenching taking place. We expect that the efficiency of TADF U-EML OLEDs can be enhanced through further research on controlling the exciton quenching using multiple U-EMLs with spacers and a novel material with a high energy transfer rate (ΔES-T).
We present an inverse designed metalens for long-wave infrared (LWIR) imaging tailored to consumer and Internet of Things (IoT) platforms. Conventional LWIR optics either rely on costly specialty materials or suffer from low efficiency and narrow fields of view (FoV), limiting scalability. Our approach integrates adjoint-based inverse design with fabrication-aware constraints and a cone-shaped source model that efficiently captures oblique incidence during optimization. The resulting multi-level metalens achieves a wide FoV up to 100° while maintaining robust focusing efficiency and stable angle-to-position mapping on low-power microbolometer arrays representative of edge devices. We further demonstrate application-level imaging on microbolometer arrays, showing that the proposed metalens delivers a substantially wider FoV than a commercial narrow FoV lens while meeting low-resolution, low-cost, and low-power constraints for edge LWIR modules. By eliminating bulky multi-element stacks and reducing cost and form factor, the proposed design provides a practical pathway to compact, energy-efficient LWIR modules for consumer applications such as occupancy analytics, smart-building automation, mobile sensing, and outdoor fire surveillance.