As one of conducting polymers, PEDOT:PSS, is commonly used in organic electronics, especially for bioelectronics due to its advantages such as high electrical and ionic conductivity, solution-processability and biocompatibility. Creating bioelectronics with the PEDOT:PSS requires advanced techniques to obtain physical/chemical modification of the PEDOT:PSS for improved performance and various applications. To satisfy these demands, fibrillary gelation of PEDOT:PSS by injection to choline acetate, an ionic liquid, with a constant flow rate was used in this study to make a conductive fiber and improve characteristics of PEDOT:PSS. Conductive fibers by fibrillary gelation showed enhanced electrical conductivity of about 400 S cm−1 and volumetric capacitance of about 154 F cm−3 which would be strongly beneficial to be utilized for organic electrochemical transistors (OECTs), resulting in a high transconductance of 19 mS in a depletion-mode. Moreover, dedoping of the conductive fibers by PEI (polyethyleneimine) enabled the creation of enhancement-mode OECTs. Interdigitated inverters were then fabricated by connecting depletion and enhancement-mode OECTs. These results demonstrate that these conductive fibers and electronic-textiles are suitable candidates for applications in bio-integrated electronics.
Light-based neuromodulation systems offer exceptional spatiotemporal resolution combined with the elimination of physical tether to communicate with neurons. Currently, optical neuromodulation systems ranging from the nano to the centimeter scale enable neural activity control from the single cell to the organ level in retina, heart, spinal cord, and brain, facilitating a wide range of experiments in intact and freely moving animals in different contexts, such as during social interactions and behavioral tasks. Nanotransducers (e.g., metallic nanoparticles, silicon nanowires, and polymeric nanoparticles) and microfabricated photodiodes convert light to electrical, thermal, and mechanical stimuli that can allow remote and non-contact stimulation of neurons. Moreover, integrated devices composed of nano and microscale optoelectronic components comprise fully implantable and wirelessly powered smart optoelectronic systems that exhibit multimodal and closed-loop operation. In this review, we first discuss the material platforms, stimulation mechanisms, and applications of passive systems, i.e., nanotransducers and microphotodiodes. Then, we review the use of organic and inorganic light-emitting diodes for optogenetics and implantable wireless optoelectronic systems that enable closed-loop optogenetic neuromodulation through the use of light-emitting diodes, wireless power transfer circuits, and feedback loops. Exploration of materials and mechanisms together with the presented applications from both research and clinical perspectives in this review provides a comprehensive understanding of the optical neuromodulation field with its advantages and challenges to build superior systems in the future.
The instability of poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) under a humid condition is the major limitation in the practical development of a flexible thermistor. Here, we introduced a functionalized graphene oxide–polyvinylidene fluoride (FGO–PVDF) composite as an encapsulation layer to prove the reliability of PEDOT:PSS thermistors under high-humidity conditions. The FGO–PVDF-encapsulated thermistor exhibited good linearity, a resolution of 1272.57 Ω per °C, a temperature coefficient of resistance equal to −3.95 × 10−3 per °C, stable performance, and an acceptable response time (∼40 s per °C) calibrated in the temperature range between −10 °C and 30 °C, resembling the temperature of a cold chain system. For applications in a food cold chain system, this thermistor was integrated into a roll-to-roll (R2R) gravure-printed NFC antenna, a microcontroller-embedded Si-chip transponder, and a printed battery to work as a smart label to wirelessly monitor the time–temperature history (TTH) of a food package. A proof-of-concept study was demonstrated by attaching an NFC-enabled hybrid TTH logger, a smart label, in a chicken package.