Geological setting and mineral composition of (apatite)-nepheline-titanite ore from the Khibiny massif enable selective mining of titanite ore, and its processing with sulfuric-acid method, without preliminary concentration in flotation cells. In this process flow diagram, titanite losses are reduced by an order of magnitude in comparison with a conventional flotation technology. Further, dissolution of titanite in concentrated sulfuric acid produces titanyl sulfate, which, in turn, is a precursor for titanosilicate synthesis. In particular, synthetic analogues of the ivanyukite group minerals, SIV, was synthesized with hydrothermal method from the composition based on titanyl-sulfate, and assayed as a selective cation-exchanger for Cs and Sr.

The production of electrolytic nickel includes the stage of leaching of captured firing nickel matte dust. The solutions formed during this process contain considerable amounts of Pb, which is difficult to extraction due to its low concentration upon the high-salt background. The sorption of lead from model solutions with various compositions by synthetic and natural titanosilicate sorbents (synthetic ivanyukite-Na-T (SIV), ivanyukite-Na-T, and AM-4) have been investigated. The maximal sorption capacity of Pb is up to 400 mg/g and was demonstrated by synthetic ivanyukite In solutions with the high content of Cl⁻ (20 g/L), extraction was observed only with a high amount of Na (150 g/L). Molecular mechanisms and kinetics of lead incorporation into ivanyukite were studied by the combination of single-crystal and powder X-ray diffraction, microprobe analysis, and Raman spectroscopy. Incorporation of lead into natural ivanyukite-Na-T with the R3m symmetry by the substitution 2Na⁺ + 2O²⁻ ↔ Pb²⁺ + □ + 2OH⁻ leds to its transformation into the cubic P−43m Pb-exchanged form with the empirical formulae Pb_1.26[Ti₄O_2.52(OH)_1.48(SiO₄)₃]·3.32(H₂O).

Titanosilicates comprise a broad class of materials with promising technological applications. The typical obstacle that restricts their industrial applicability is the high manufacturing cost due to the use of specific organotitanium precursors. We herein report a new approach to the synthesis of titanosilicates using an inexpensive inorganic precursor, ammonium titanyl sulfate (ATS or STA), (NH₄)₂TiO(SO₄)₂∙H₂O. The latter is an intermediate in the processing of titanium-bearing concentrates produced from apatite-nepheline ores. In this paper, the new synthetic approach is exemplified by the microwave-assisted synthesis of IONSIVE-911, one of the most effective Cs-ion scavengers. The method can be modified to synthesize various titanosilicate compounds.

The paper focuses on a transition from studying synthetic analogs of rare titanosilicate minerals (lintisite, ivanyukite, and zorite) in the powdery state to investigating their new granulated forms. Five different methods for granulating titanosilicate samples are tested: fluidized bed and spray dry granulation, spray bed granulation, screw rotor granulation, and manual pressing of paste through a stainless-steel sieve with a 1 mm mesh size. The results of studying sorption of trace amounts of ¹³⁷Cs and ⁹⁰Sr radionuclides from model solutions of various compositions onto inorganic sorbents in powdered and granulated forms are presented.

The modal composition of (apatite)-nepheline-titanite ore and its geological setting within apatite deposits of the Khibiny Massif allow selective mining of titanite ore and its hydrochloric acidic processing. The reaction of titanite with concentrated hydrochloric acid produces hydrated titanosilicate precipitate (TSP) which, in turn, can be a precursor in titanosilicate synthesis. It is particularly noteworthy that a synthetic analogue of korobitsynite, Na₅(Ti₃Nb)[Si₄O₁₂]₂O₂(OH)₂·7H₂O, was synthesized by means of TSP alteration by alkaline hydrothermal solution at 200 °C within three days. The titanosilicate obtained this way has comparatively weak cation-exchange properties regarding Cs⁺ and Sr²⁺ cations and considerable photocatalytic activity occurring under visible light, which allows the use of a synthetic korobitsynite analogue (SKR) for production of self-cleaning, sterilizing, and anti-fouling building materials.