Repetitive schemes represent an attractive solution for harmonic compensation, as they are easy to implement and require a reduced computational effort. Repetitive schemes involve the interconnection of delay lines usually implemented in digital form. A delay line is realized digitally by reserving a given number of memory localities, where samples are allocated and released after a specific number of sampling periods (discrete delay) equivalent to the delay time. Such a discrete delay computed as the ratio between the required delay time and the sampling period must be an integer number in the best scenario. However, the discrete delay may have a fractional part due to limitations on the sampling period or the required delay time. This issue is referred in signal processing literature as fractional delay (FD). This paper presents a solution to implement repetitive schemes subject to such an FD issue. The solution consists in the introduction, on each delay line, of an additional filter aimed to compensate such an FD. In particular, this paper focuses on a repetitive scheme that is able to compensate harmonics 6n ±1. Experimental results are presented to confirm the benefits of the proposed scheme.
17 April 2015 in IEEE Transactions on Industrial Electronics
Repetitive schemes, aimed for harmonic compensation, are formed by the interconnection of delay lines. They are usually implemented in a digital way, where delay lines are replaced by discrete delays. Each discrete delay is obtained as the ratio between the required delay time in continuous time and the sampling period. A problem arises whenever the delay time of the controller is not an integer multiple of the sampling period. This is referred to in the literature as the fractional delay issue. In repetitive schemes, the delay time is a function of the fundamental frequency of the signals under study. Applications where the fundamental frequency varies with time entails variations in the delay time and, in particular, in its fractional part. This issue is referred to as variable fractional delay (VFD). This work presents a simple solution to implement repetitive schemes subject to a VFD issue. The introduction of an additional filter structure, called the Farrow structure, to each delay line is proposed. Theoretical analysis and design guidelines for the Farrow-structure-based repetitive scheme are provided. In particular, this paper focuses on the 6k ± 1 repetitive scheme. Experimental results are presented to confirm the benefits of the proposed solution.
In this paper, a Higher Order Wavelet Neural Network (HOWNN) trained with an Extended Kalman Filter (EKF) is implemented to solve the wind forecasting problem. The Neural Network based scheme is composed of high order terms in the input layer, two hidden layers, one incorporating radial wavelets as activation functions and the other using classical logistic sigmoid, and an output layer with a linear activation function. A Kalman filter based algorithm is employed to update the synaptic weights of the wavelet network. The size of the regression vector is determined by means of the Lipschitz quotients method. The proposed structure captures more efficiently the complex nature of the wind speed time series. The proposed model is trained and tested using real wind speed data values.
Nowadays, there are many technological-intensive applications that claim to be “smart”. From smartphones to the smart grid, people relate the word smart with technical novelty, automation, enabled communication, and service integration. There is indeed a gap between those smart technologies and their intended “intelligence”; this has arisen an indirect debate between works focusing on automation and mechatronics design and others pursuing a conceptual approach based on fulfilling determinate objectives. One last approach relates the said smartness to deep learning methodologies. In this work, it is attempted to explore both perspectives by providing an overview of recent works around energy usage toward smart cities and the smart grid, pointing out the main conceptual pillars upon which both approaches stand. Certainly, there are enabling technologies supporting the smart concept overall; thus, this work addresses them to characterize “smart” not from technological or conceptual one-sided viewpoints but from their common backbone. Therefore, the interested reader can find in this work an integrative conceptualization of the smart context, a literature review of recent advances, and a deep discussion of how enabling technologies and current technological trends based on energy consumption are shaping the ongoing efforts toward a sustainable future. More importantly, a new approach to define smart in the said context is elaborated far from the typical misunderstanding of technological nesting or mere usage of “advanced” digital technologies. Rather, smartness is addressed by the integrative objectives the application pursues, the objectives set by its users’ intent, and the attained results in terms of public benefit.
4 January 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This work proposes a controller for a three-phase cascade H-bridge 7-level converter used in a shunt active power filter (SAPF) application which includes a repetitive scheme for the compensation of harmonics 6 h ±1. A model description in terms of more appropriate variables facilitates the control design process as it can be split into three independent loops, namely inner current tracking loop, and outer voltage regulation and balance loops. As a first approach, the inner current loop includes a bank of resonators scheme as the harmonic distortion compensator (HDC), which is later replaced by a repetitive scheme with the aim to reduce the computational effort. However, the required delay to implement the delay lines in the repetitive scheme turns out to be a function of the fundamental frequency, which in real applications may exhibit gradual variations. This entails an implementation issue referred to as the variable fractional delay (VFD), which is compensated by incorporating a Farrow structure. The performance of the proposed controller has been tested in an SAPF based on a cascade H-bridge 7-level converter prototype.
Repetitive schemes represent a very attractive solution for harmonics compensation, as they are simple to implement and the computational effort is reduced. Their implementation, usually performed in digital form, involves the interconnection of a single delay line or a simple array of delay lines. In discrete time domain, a delay line is implemented using a given number of memory locations, where samples are allocated and released after a specific number of sampling periods (discrete delay) equivalent to the delay time. This discrete delay is obtained as the ratio between the sampling period and the required delay time. The problem arises whenever the delay time is a noninteger multiple of the sampling period, in this case the discrete delay is a real positive number having a fractional part. This issue is referred in signal processing literature as fractional delay. This paper presents a solution for the practical implementation of repetitive schemes where the delay lines are subject to the fractional delay issue. The solution consists in the introduction, on each delay line, of an additional filter aimed to approximate such a fractional delay. This filter has the structure of a finite impulse response (FIR) filter, and thus, it is referred as FIR fractional delay (FIR-FD) filter. Its design follows a Lagrange interpolation technic, which relays in explicit formulae for the computation of the coefficients of the FIR filter. In particular, the present paper is focused in the repetitive scheme proposed in [11] for compensation of harmonics 6ℓ ± 1 (ℓ = 0, 1, 2, ...∞) of the fundamental frequency . Numerical results are presented to confirm the benefits of the proposed scheme. Experiments are in process and the results will be available in the final version of the paper.