Ghullnaz Shazadi

Dr. Ghullnaz Shazadi


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 December 2019 in Entropy
Verified
Journal Article
Open access
PDF file
Ghulam RasoolGhulam Rasool
Ghulam Rasool
TZTing Zhang
Ting Zhang
ACAli Chamkha
Ali Chamkha
Anum ShafiqAnum Shafiq
Anum Shafiq
Iskander TliliIskander Tlili
Iskander Tlili
Ghullnaz ShazadiGhullnaz Shazadi
Ghullnaz Shazadi
The current article aims to present a numerical analysis of MHD Williamson nanofluid flow maintained to flow through porous medium bounded by a non-linearly stretching flat surface. The second law of thermodynamics was applied to analyze the fluid flow, heat and mass transport as well as the aspects of entropy generation using Buongiorno model. Thermophoresis and Brownian diffusion is considered which appears due to the concentration and random motion of nanoparticles in base fluid, respectively. Uniform magnetic effect is induced but the assumption of tiny magnetic Reynolds number results in zero magnetic induction. The governing equations (PDEs) are transformed into ordinary differential equations (ODEs) using appropriately adjusted transformations. The numerical method is used for solving the so-formulated highly nonlinear problem. The graphical presentation of results highlights that the heat flux receives enhancement for augmented Brownian diffusion. The Bejan number is found to be increasing with a larger Weissenberg number. The tabulated results for skin-friction, Nusselt number and Sherwood number are given. A decent agreement is noted in the results when compared with previously published literature on Williamson nanofluids.

20 April 2020 in Symmetry
Verified
Journal Article
Open access
PDF file
Ghulam RasoolGhulam Rasool
Ghulam Rasool
Anum ShafiqAnum Shafiq
Anum Shafiq
IKIlyas Khan
Ilyas Khan
Dumitru BaleanuDumitru Baleanu
Dumitru Baleanu
KNKottakkaran Sooppy Nisar
Kottakkaran Sooppy Nisar
Ghullnaz ShazadiGhullnaz Shazadi
Ghullnaz Shazadi
Present communication aims to inspect the entropy optimization, heat and mass transport in Darcy-Forchheimer nanofluid flow surrounded by a non-linearly stretching surface. Navier-Stokes model based governing equations for non-Newtonian nanofluids having symmetric components in various terms are considered. Non-linear stretching is assumed to be the driving force whereas influence of thermal radiation, Brownian diffusion, dissipation and thermophoresis is considered. Importantly, entropy optimization is performed using second law of thermodynamics. Governing problems are converted into nonlinear ordinary problems (ODEs) using suitably adjusted transformations. RK-45 based built-in shooting mechanism is used to solve the problems. Final outcomes are plotted graphically. In addition to velocity, temperature, concentration and Bejan number, the stream lines, contour graphs and density graphs have been prepared. For their industrial and engineering importance, results for wall-drag force, heat flux (Nusselt) rate and mass flux (Sherwood) rate are also given in tabular data form. Outputs indicate that velocity reduces for Forchheimer number as well as for the porosity factor. However, a rise is noted in temperature distribution for elevated values of thermal radiation. Entropy optimization shows enhancement for larger values of temperature difference ratio. Skin-friction enhances for all relevant parameters involved in momentum equation.

2 January 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Ali RazaAli Raza
Ali Raza
DSDr. SYYED ADNAN RAHEEL SHAH
Dr. SYYED ADNAN RAHEEL SHAH
AKAHSAN REHMAN KHAN
AHSAN REHMAN KHAN
MAMuhammad Asif Aslam
Muhammad Asif Aslam
TKTanveer Ahmed Khan
Tanveer Ahmed Khan
MWMuhammad Waseem
Muhammad Waseem
The use of fiber-reinforced polymer (FRP) jackets as external confinement is becoming popular, especially in seismic areas, because of its ability to enhance the strength and ductility of reinforced concrete to perform as a sustainable symmetric structural member. Therefore, various researchers have worked out for the prediction of strength and strain models of FRP-confined concrete. This study presents the improved strain models for the FRP confined cylindrical concrete members. Different previously proposed models of axial strain of FRP-confined concrete were evaluated based on a large database of 678 specimens from previous experiments and an improved model was proposed using the general regression analysis technique. Furthermore, the proposed model was validated using the previous experimental work of FRP-wrapped concrete cylinders and their finite elements analysis (FEA) using the ABAQUS software. The accuracy of the proposed strain model was quite satisfactory in comparison with the previous experimental and FEA results of the present study. Moreover, the proposed empirical strain model was used for the parametric study to investigate the effect of different geometric and material parameters such as the compressive strength of unconfined concrete, diameter of the cylinder, elastic modulus and thickness of the FRP layers, on the axial strain of FRP-wrapped cylinders. A close agreement among the proposed strain models and experimental outputs was observed. This study will help in understanding the behavior of sustainable FRP-confined symmetric concrete members.

31 July 2019 in Mathematics
Verified
Journal Article
Open access
PDF file
HKHumaira Kalsoom
Humaira Kalsoom
MLMuhammad Amer Latif
Muhammad Amer Latif
Moin-ud-Din JunjuaMoin-ud-Din Junjua
Moin-ud-Din Junjua
SHSabir Hussain
Sabir Hussain
Ghullnaz ShazadiGhullnaz Shazadi
Ghullnaz Shazadi
In this paper, we present the preliminaries of ( p , q ) -calculus for functions of two variables. Furthermore, we prove some new Hermite-Hadamard integral-type inequalities for convex functions on coordinates over [ a , b ] × [ c , d ] by using the ( p , q ) -calculus of the functions of two variables. Furthermore, we establish an identity for the right-hand side of the Hermite-Hadamard-type inequalities on coordinates that is proven by using the ( p , q ) -calculus of the functions of two variables. Finally, we use the new identity to prove some trapezoidal-type inequalities with the assumptions of convexity and quasi-convexity on coordinates of the absolute values of the partial derivatives defined in the ( p , q ) -calculus of the functions of two variables.

30 June 2021 in Water
Verified
Journal Article
Open access
PDF file
Ghullnaz ShazadiGhullnaz Shazadi
Ghullnaz Shazadi
ASAzzeddine Soulaïmani
Azzeddine Soulaïmani
Computational modeling plays a significant role in the design of rockfill dams. Various constitutive soil parameters are used to design such models, which often involve high uncertainties due to the complex structure of rockfill dams comprising various zones of different soil parameters. This study performs an uncertainty analysis and a global sensitivity analysis to assess the effect of constitutive soil parameters on the behavior of a rockfill dam. A Finite Element code (Plaxis) is utilized for the structure analysis. A database of the computed displacements at inclinometers installed in the dam is generated and compared to in situ measurements. Surrogate models are significant tools for approximating the relationship between input soil parameters and displacements and thereby reducing the computational costs of parametric studies. Polynomial chaos expansion and deep neural networks are used to build surrogate models to compute the Sobol indices required to identify the impact of soil parameters on dam behavior.

1 November 2019 in Processes
Verified
Journal Article
Open access
PDF file
MQMuhammad Ahmed Qurashi
Muhammad Ahmed Qurashi
DSDr. SYYED ADNAN RAHEEL SHAH
Dr. SYYED ADNAN RAHEEL SHAH
MFMUHAMMAD FARHAN
MUHAMMAD FARHAN
MTMuhammad Taufiq
Muhammad Taufiq
WKWaleed Khalid
Waleed Khalid
MWMuhammad Waseem
Muhammad Waseem
The development of sustainable lightweight materials is a promising field solution in this era. The production of sustainable materials by replacing coarse aggregates with some lightweight alternative provides a good quality construction material. In this study, rocky coarse aggregates were replaced by an ultra-lightweight material (i.e., expanded polystyrene beads) to produce an equivalent rock-solid mass of concrete. Using an M15 grade of concrete composition, expanded polystyrene (EPS) beads were added in place of aggregates in amounts ranging from 5% to 40% at a water–cement (w/c) ratio of 0.60. The specimen size as per American Society for Testing and Materials (ASTM) specification was 150 mm in diameter and 300 mm in length. Furthermore, statistical analysis for the relationship study for destructive testing (DT) (i.e., compressive test machine) and non-destructive testing (NDT) (i.e., rebound hammer and ultrasonic pulse velocity (UPV)) has been performed at developed specimens under 7- and 28-day curing conditions. In the end, the results showed that NDT predicts higher compressive strength than that of DT with the addition of EPS beads up to 20% aggregate replacement, after that it is vice versa for up to 40% aggregate replacement. This study will not only help in the production of sustainable lightweight materials, but especially concrete block production can also be performed at a large scale as a sustainable engineering solution.