Operative Dentistry and Periodontology, University of Cologne, Faculty of Medicine and University Hospital Cologne, Cologne, North Rhine-Westphalia, Germany
Mr. Gustav Leo Classen
Operative Dentistry and Periodontology, University of Cologne, Faculty of Medicine and University Hospital Cologne, Cologne, North Rhine-Westphalia, Germany
Purpose: Nickel–titanium (NiTi) instruments have advanced root canal preparation through enhanced precision. Thermal pretreatment improves both flexibility and cyclic fatigue resistance (CFR). While irrigating solutions are essential for decontamination, they may also affect the properties of heat-treated NiTi instruments. This study aimed to evaluate the impact of different irrigating solutions on the cyclic fatigue resistance of heat-treated NiTi files. Methods: Four heat-treated reciprocating NiTi-files were analyzed: EdgeOne R-Utopia, Reciproc Blue, Procodile Q and CC One Blue. Files were immersed (5 min; 37 °C and 60 °C) in 5.25% sodium hypochlorite (NaOCl), 17% ethylenediaminetetraacetic acid (EDTA), 96% ethanol, NaOCl + EDTA, distilled water, or left in a no-immersion control group. CFR was measured in an artificial root canal (60° curvature, 5 mm radius), and fragment length (FL) was documented. The surface features of the fragments were assessed through scanning electron microscopy. Results: File system, irrigating solution, and temperature significantly influenced CFR (p < 0.001). Across all immersion conditions, the CFR reached its highest value with Procodile Q (37 °C distilled water) and its lowest with EdgeOne R-Utopia (60 °C NaOCl + EDTA). EDTA reduced CFR across all files, particularly at elevated temperatures and when combined with NaOCl. Microscopy revealed micropitting and roughened surfaces, particularly on CC One Blue (60 °C NaOCl), as well as material degradation and heterogeneous surfaces with NaOCl + EDTA. Conclusions: Heat-treated NiTi instruments are influenced in their mechanical and metallurgical behavior by the chemical and thermal impact of irrigating solutions. Heated EDTA and NaOCl + EDTA were detrimental, while Procodile Q demonstrated the highest CFR. Within the limitations of this study, exposure to irrigating solutions, particularly heated EDTA and NaOCl + EDTA, reduced the cyclic fatigue resistance of heat-treated NiTi files. Clinically, prudent selection and temperature control of irrigants may help preserve instrument performance and reduce the risk of file fracture during root canal preparation.
Objectives: To introduce a novel method for apical lesion sampling using a protected paper point device and to evaluate its effectiveness and robustness during the sampling process in vitro. Methods: A prototype for apical sample collection was developed as an adaptation of the Micro-Apical Placement System—the device features a highly tapered screw head with a thin, hollow, stainless-steel tube and an internal wire piston. Standardized 5 mm paper points (ISO 10; PD Dental, Switzerland) served as carrier material. The prototype was tested using 30 × 3D-printed, single-rooted tooth models inoculated using two bacterial strains (Staphylococcus epidermidis and Escherichia coli) to simulate apical and intraradicular bacterial infections, respectively. The sampling process involved collecting and analyzing samples at specific timepoints, focusing on the presence or absence of E. coli contamination. Following sample collection, cultural detection of bacterial presence was performed by incubating the samples on agar plates to confirm the presence of E. coli. Samples were collected as follows: S0 (sterility control of the prototype), P0 (sterility control of the tooth model), P1 (apical sample collected with the CAPS (controlled apical sampling) device, and P2 (contamination control sample to check for the presence of E. coli inside the root canal). Results: Handling of the CAPS prototype was straightforward and reproducible. No loss of paper points or complications were observed during sample collection. All sterility samples (P0, S0) were negative for tested microorganisms, confirming the sterility of the setup. P2 samples confirmed the presence of E. coli in the root canal in all trials. The P1 samples were free from contamination in 86.67% of trials. Conclusions: The CAPS method for apical sampling demonstrated advances in the successful and precise sample collection of apically located S. epidermidis and will be a useful tool for endodontic microbiological analysis. Its user-friendly design and consistent performance highlight its potential for clinical application, contributing to more accurate microbial diagnostics and later patient-specific therapeutic approaches in endodontic treatments.