Hakjun Lee

Dr. Hakjun Lee

Korea Institute of Industrial Technology(KITECH)

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 January 2022 in Actuators
Verified
Journal Article
Open access
PDF file
YJYong-Jin Jeong
Yong-Jin Jeong
THTae-Hwa Hong
Tae-Hwa Hong
HLHakjun Lee
Hakjun Lee
KKKihyun Kim
Kihyun Kim
The electroadhesion pad is mainly studied for applications, such as climbing robots and grippers. In this paper, we present our study with the confirmation of the adhesion properties of the electroadhesion pad with a double-insulating layer, pad modeling, and optimal design. Modeling and analysis consider the air layer generated during the manufacturing of both conventional single-insulated structures and dual-insulated structures. Through the finite element analysis simulation, the characteristics of the electroadhesion were verified, and modeling verification was performed, based on the variables that had a large influence as follows: applied voltage, electrode area, dielectric thickness, and permittivity. The electrode is made of aluminum, the substrate is made of silicon, and the dielectric is made of polyimide film. An error of up to 8.3% was found between the modeling and simulation. The optimization results were validated based on a pad applied to a climbing robot measuring 320×480mm² and weighing 2.8 kg. As a result, the optimal pad design resulted in an error of 7.3% between the modeling and simulation.

6 August 2024 in International Journal of Precision Engineering and Manufacturing
Verified
Journal Article
Closed access
PDF file
TKTae-Ho Kim
Tae-Ho Kim
DADahoon Ahn
Dahoon Ahn
MLMoon G. Lee
Moon G. Lee
JPJaehyun Park
Jaehyun Park
HLHakjun Lee
Hakjun Lee

22 August 2023 in International Journal of Precision Engineering and Manufacturing
Verified
Journal Article
Open access
PDF file
TKTae-Ho Kim
Tae-Ho Kim
SNSung-Hun Noe
Sung-Hun Noe
YCYong-Man Choi
Yong-Man Choi
HLHakjun Lee
Hakjun Lee
Since the introduction of automation systems has begun to be applied to most industries with the development of technology, the utilization of industrial robots is increasing every year. However, the processing field a such as milling and Rough Cutting processing process occurs vibration from large processing load. Since industrial robots basically have low stiffness, they are vulnerable to vibration generated from processing loads when processing. In this paper, multi-axis active spindle holder of high stiffness was developed to improve precision and quality deterioration due to vibration generated from a processing load. If an active spindle holder of high stiffness is applied, it can increase the dynamic stiffness of the robot by blocking vibrations in the low-frequency range at the end effector before they are transmitted from the spindle to the robot, and as a result, it is expected to improve precision and quality. The performance evaluation of the active spindle holder manufactured based on the design was proceeded, and it was verified that the active spindle holder developed to compensate for the shortcomings of industrial robots was made with moving range and high stiffness of 200 Hz more. Furthermore, machining experiments confirmed an improvement in quality of more than 10%.

20 August 2024 in International Journal of Precision Engineering and Manufacturing
Verified
Journal Article
Open access
PDF file
Martin ČechMartin Čech
Martin Čech
JYJun Young Yoon
Jun Young Yoon
HLHakjun Lee
Hakjun Lee

29 October 2024 in Vibration
Verified
Journal Article
Open access
PDF file
AJAN MOK JEONG
AN MOK JEONG
KJKyuchul Jung
Kyuchul Jung
YPYoung-Cheol Park
Young-Cheol Park
JHJunyeong Heo
Junyeong Heo
HLHakjun Lee
Hakjun Lee
Vibrations generated from equipment mounted on ships radiate into the water and affect covert operation capabilities. Accordingly, various studies are being conducted to reduce vibration transmitted from mounted equipment. In this study, a system consisting of mounting equipment, a 3-axis active mount, a middle pedestal, and a lower mount of the middle pedestal was modeled using a finite element analysis program, and a mobility model was constructed by calculating the frequency response function between the positions required for analysis. The error signal (primary path) obtained using the mobility model and the response at the operating point by the control force of the actuator (secondary path) are applied to the narrowband Fx-LMS algorithm for vibration control, and the control performance was compared. Through coupling analysis of the middle pedestal, the control influence according to the rigidity of the middle pedestal was analyzed. As a result of the control simulation, the time required for vibration control was controlled approximately 6 times faster in the model, with increased stiffness of the middle pedestal, and the vibration reduction performance was predicted to improve by a minimum of 0.9 dB and a maximum of 13.3 dB. Through this study, a simulation model that can provide a guide for the design of the middle pedestal of a ship was obtained, and it is expected that it can be utilized for a preliminary design review before manufacturing the middle pedestal of a ship.

28 March 2022 in Actuators
Verified
Journal Article
Open access
PDF file
HLHakjun Lee
Hakjun Lee
DADahoon Ahn
Dahoon Ahn
This paper presents an air bearing stage that uses flexure for yaw motion compensation. The proposed stage realizes motion in three degrees of freedom (DOF), which are the X, Y, and Θz directions. To work with Θz as the rotational motion of the stage, we applied a flexure consisting of four bar linkages. The stage from a previous study in which flexure is applied to compensate for yaw motion error has the limitation of increasing the structural stiffness of the stage due to the rotational stiffness. In this study, we propose a combination of a new stage structure and flexure to ensure the high structural stiffness of the stage and the very low rotational stiffness of the flexure at the same time. Modeling and design optimization were performed to apply adequate flexure to the proposed stage. Experiments were carried out to verify yaw motion error compensation and the performance of the stage. The proposed stage has a maximum yaw motion error of 0.86 arcsec during the scanning motion and 48 ms settling time, while the stepping motion is improved by 34.2% compared to the previous study.