The electroadhesion pad is mainly studied for applications, such as climbing robots and grippers. In this paper, we present our study with the confirmation of the adhesion properties of the electroadhesion pad with a double-insulating layer, pad modeling, and optimal design. Modeling and analysis consider the air layer generated during the manufacturing of both conventional single-insulated structures and dual-insulated structures. Through the finite element analysis simulation, the characteristics of the electroadhesion were verified, and modeling verification was performed, based on the variables that had a large influence as follows: applied voltage, electrode area, dielectric thickness, and permittivity. The electrode is made of aluminum, the substrate is made of silicon, and the dielectric is made of polyimide film. An error of up to 8.3% was found between the modeling and simulation. The optimization results were validated based on a pad applied to a climbing robot measuring and weighing 2.8 . As a result, the optimal pad design resulted in an error of 7.3% between the modeling and simulation.
The milling of highly flexible workpieces, such as thin-walled structures used in turbine blades, aerospace equipment, and jet engine compressors, requires vibration compensation to improve the quality of the workpiece surface. Vibration can be reduced by selecting appropriate cutting parameters. However, this approach reduces system productivity. This paper presents an active workpiece holder that controls the vibration of general computer numerical control machine tools. The proposed holder, which comprises a flexible guide mechanism, driver, and sensor, measures vibration and actively controls it using piezoactuators. A high-rigidity flexure mechanism was designed for the holder, and finite element method simulation and modal analysis were performed. Finally, the proposed system was fabricated, and experimental verification indicated that the system reduced vibration. The surface quality obtained using the controlled system was ∼50% better than that obtained using the uncontrolled system.
1 February 2020 in Review of Scientific Instruments
In recent years, precision stages, which are widely used in many industrial fields, have been required to have a higher speed, larger size, and higher precision to help realize higher productivity and product quality. High-performance positioning techniques for inspection and production equipment are classified as one of the most challenging technologies. Vibration control is crucial to realize high-precision positioning technologies. In a precision system, various vibrations exist, which act as disturbances and can degrade the system performance. Minimizing the vibrations generated by the system can, thus, help improve the accuracy of system positioning. This paper proposes a hybrid active mount module for a precision stage. The developed module improves stage performance by reducing the base vibration arising from the floor, minimizing the vibration caused by the driving linear motors of the precision stage, and reducing the settling time by compensating the offset displacement due to the nonlinearity of the passive mount during stage driving. The prototype design is presented herein, and the experimental results demonstrate the potential of the developed device. The developed system is expected to effectively improve the stage performance by controlling the various causes of vibration.
1 January 2019 in Journal of the Korean Society for Precision Engineering
Transfer robots for large-sized panels used in the display industry need to compensate for path error and reduce vibration. The iterative learning control (ILC) technique can simply compensate for the uncertainty of a control system in a repetitive motion. This study introduces an ILC compensation system applied with an accelerometer to a display panel transfer robot control system. The ILC technique was used to reduce the path error and vibration induced the flexibility of the large size robot. This method was applied to a robot system without the system model of the mechanical and measurement elements. To improve the iterative learning performance through the accelerometer, the ILC is configured by applying an acceleration element and time shift method to the PD-Offline ILC algorithm. In addition, based on the characteristics of repetitive motion, the ILC derives an acceleration data-based position estimation value. In this study, the ILC system and a large-sized panel transfer robot were implemented in MATLAB-Simulink with RECURDYN. The path errors and vibration level of the robot with a suggested ILC of 20 repeated learnings were reduced by more than 90%.
1 August 2020 in Journal of the Korean Society for Precision Engineering
Recently, instrument stages using flexure guide mechanisms and piezo actuators have been widely used for an ultra-precision positioning system in various industries. Research into ultra-precision position control aiming at nanoscale position errors during stage driving is being actively conducted, as well as various studies on the motion profile adjusting the reference input. In this study, we suggested a motion profile with snap and feedforward for use with a high speed nano scanning system, as compared and analyzed with the position tracking error through feedback control, and also compared to the related feed with the forward control noted as minimized at the position error to 14.19 nm. As a result, a tracking error when applying the fourth profile with snaps to the piezoelectric stage, is obtained with an error reduction effect of about 15%, as compared to when the second profile is applied.