Hamed Mashinchi Maheri

Dr. Hamed Mashinchi Maheri

Tallinn University of Technology (TalTech)
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
EBEbrahim Babaei
Ebrahim Babaei
HMHamed Mashinchi Maheri
Hamed Mashinchi Maheri
MSMehran Sabahi
Mehran Sabahi
SHSeyed Hossein Hosseini
Seyed Hossein Hosseini
In this paper, a new non-isolated high step-up dc-dc converter is proposed. Active-passive inductor cells (APICs) is used to extend the topology. The ability to achieve high gains is the main merit of the proposed topology. The proposed converter operates based on parallel charging and series discharging of the inductors. The converter also achieves high step-up voltage gain with appropriate duty cycle and low voltage and current stress on the power switches and diodes. The proposed converter is analyzed in operation modes. The main parameters of the converter such as voltage gain, voltage stress of semiconductor devices are calculated to compare with other structures in literature. Considering the output voltage ripple and filter size, the proposed converter is designed. Moreover, the losses and efficiency of the converter are calculated. The performance of the proposed converter is validated by experimental results.

16 January 2017 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
HMHamed Mashinchi Maheri
Hamed Mashinchi Maheri
EBEbrahim Babaei
Ebrahim Babaei
MSMehran Sabahi
Mehran Sabahi
SHSeyed Hossein Hosseini
Seyed Hossein Hosseini
In this paper, a new structure for high step-up dc-dc converters is proposed. In the proposed structure, it is possible to extend the topology by increasing the number of active-passive inductor cells. High voltage gain with lower duty cycle, low-current and -voltage stresses on switches, small inductors, and small size of filter are the main advantages of the proposed structure. The proposed converter is analyzed in different operating modes. In order to design the components' values of the proposed converter, the equations of output voltage ripple are calculated in each operating mode and a design procedure is proposed based on the aforementioned equations. Moreover, the losses and efficiency of the converter are calculated. In order to validate the correctness of calculations and analyses, the experimental results are given.

5 April 2011 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
EBEbrahim Babaei
Ebrahim Babaei
MMMir Esmaeel Seyed Mahmoodieh
Mir Esmaeel Seyed Mahmoodieh
HMHamed Mashinchi Maheri
Hamed Mashinchi Maheri
This paper investigates the buck-boost dc-dc converter and the energy transmission techniques in this kind of converter. In this paper, the critical inductance between the continuous conduction and discontinuous conduction modes are determined. In addition, the critical inductance equation between the complete inductor supply mode and incomplete inductor supply mode are calculated. The energy transmission technique and the output voltage ripple (OVR) of a buck-boost converter are analyzed in a specific range of the load and input voltage. The relations between the maximum OVR (MOVR) and the converter component parameters are deduced, and the minimum inductance value is calculated to ensure the MOVR minimization. Experimental and simulation results are used to prove the validity of the presented theoretical subjects.

1 January 2013 in International Journal of Electrical Power & Energy Systems
Verified
Journal Article
Closed access
HMHamed Mashinchi Maheri
Hamed Mashinchi Maheri
EBEbrahim Babaei
Ebrahim Babaei

1 December 2012
Verified
Conference Paper
Closed access
SBSepideh Bahravar
Sepideh Bahravar
HMHamed Mashinchi Maheri
Hamed Mashinchi Maheri
EBE. Babaei
E. Babaei
MSM. Sabahi
M. Sabahi
In this paper, a new method is presented for mathematical modeling of the buck-boost dc-dc converter in continuous conduction mode (CCM). The proposed method consists of two stages. At first stage, the related relations of the inductor current and the output voltage are obtained using the Laplace transform. In the second stage, the initial values of the inductor current and the output voltage are obtained in each switching interval. In this stage, the Z-transform is used as a tool for determining the initial values of the inductor current and the capacitor voltage. In continuous, after obtaining the time functions of the inductor current and the capacitor voltage, the transient response of the converter is investigated. Also the effect of the converter components on the transient response of the buck-boost dc-dc converter is analyzed by the obtained relations and curves. Finally, the results of the theoretical analysis are compared with the simulation results in PSCAD/EMTDC to prove the validity of the presented subjects.

1 December 2012
Verified
Conference Paper
Closed access
HMHamed Mashinchi Maheri
Hamed Mashinchi Maheri
STSaman Torabzad
Saman Torabzad
MSMehran Sabahi
Mehran Sabahi
EBEbrahim Babaei
Ebrahim Babaei
In this paper, the stability of the buck-boost dc-dc converter in the continuous conduction mode (CCM) is investigated by using a modeling method. The proposed method is based on the two Laplace and Z-transforms. The Laplace transform is used for determination of the general relations of the inductor current and the output voltage. Also the Z-transform is used for obtaining the transfer function of the buck-boost dc-dc converter. Then by using the transfer function which is in the Z domain, the stability of the buck-boost dc-dc converter is investigated and the effect of the converter elements on its stability is analyzed. Finally, the results of the theoretical analysis are compared with the results of the simulation in the PSCAD/EMTDC to prove the validity of the presented theoretical subjects.