Fire hazards are an increasing concern in several high-tech industries of public importance, particularly where textile fabrics are used in abundance. In this study, a novel layer by layer deposition method was utilized to develop a fire-retardant coating on cotton fabric. The method involves a hybrid cationic solution consisting of chitosan and branched polyethyleneimine, while bentonite clay was used as the anionic species. The treated fabric was characterized using SEM, VFT, and attenuated total reflection Fourier transform infrared spectroscopy (FTIR). SEM and EDS profiling confirmed the successful deposition of the (BPEI/CH + BNT) species on the surface of the cotton fabrics. FTIR analysis shows changes in chemical composition between the uncoated and coated samples, as confirmed by modifications in peaks at 3621 cm−1, 1023.3 cm−1, 1631 cm−1, and 614.8 cm−1. Finally, the thermal degradation behavior of pre-coated and post-coated samples was evaluated using thermogravimetric (TGA) analysis within a temperature range of 25 °C~700 °C, where the highest residue of ~19.83% was observed at 700 °C for the D-BPCB-30BL sample, signifying highly improved thermal stability compared to uncoated cotton.
A sol-gel matrix was generated from S– and P-based acids to prepare a fire-retardant solution system for coating natural cotton fibers. The physical properties, surface morphology, and elemental composition of the coated samples were assessed using optical scanning electron microscopy. The thermal behavior of the coated samples was documented using TGA and VFT tests, which confirmed higher thermal stability of the phosphate-based coatings. High char residue formation (~44.5%) and self-extinguishing properties were observed for the phosphate-based coating under non-curing conditions. The superior properties of phosphate-based coatings P5-4h could be ascribed to the collaborative effect of P–Si–N—i.e., the combined activity during the combustion process and pyrolysis of the coated sample.
The traditional acid-based production method was often utilized to produce flame-retardant material, which is environmentally hazardous and adversely affects the intrinsic properties of the substrates. To address these critical challenges, this work was carried out to develop a pioneer flame-retardant composite material based on cotton and biocompatible hybrid cationic/anionic species deposited through the Layer-by-Layer deposition method. The FTIR results unveil the peaks reflected by coated elements, confirm the successful deposition of coating materials on the cotton substrate. The microstructure and uniform deposition of the coating were analyzed through scanning electron microscopy. The thermal stability of the composites is enhanced with higher coating layers due to the formation of a protective char layer. Flame retardancy of the investigated samples is measured through the vertical flame test and micro-combustion calorimetry method, exhibiting remarkable reduction in peak heat release rate and total heat released rate by 47.30% and 34%, respectively. The acquired results acknowledge the suitability of the production method to produce green fire-retardant materials with excellent thermal stability and flame retardancy to utilize in the fire-resistant industry.
In this work, poly(acrylic acid)-based layers were injected to form a sandwich layer between the cationic and anionic species for a compact and effective fire-retardant coating on cotton fabric using the layer-by-layer coating technique. From the SEM analysis, as the number of tri-layers increases, the attachment intensity increases, as can be seen for poly(acrylic acid) chitosan and bentonite clay PCB-5TL (the highest tri-layers), while in the case of halloysite-based coatings, as the number of tri-layers increases, instead of attachment, the agglomeration increases due to the high surface area of halloysite nanoclay tubes. FTIR and UV confirmed the finding from the new peak entry and an increase in thickness. The highest thermal residue, ~18%, was obtained for poly(acrylic acid) chitosan and halloysite nanoclay PCH-5TL with a maximum degradation peak intensity at ~389 °C. From the flammability and after-burning SEM investigation test, it was observed that the halloysite-based coating with a higher number of layers offered higher resistance against the flame spread and ignition and, thus, produced a higher amount of char.
A hybrid cationic system comprising bio-based chitosan and synthetic branched polyethyleneimine (BPEI) was employed to facilitate the flame-retardant deposition of halloysite nanotubes (HNTs) onto cotton fabrics through a layer-by-layer (LbL) assembly process. The FTIR results revealed new peaks of O-H stretching and Si-O-Si groups on halloysite nanoclay at the respective positions of 3699.84 cm−1, 3625.60 cm−1, and 527.57 cm−1, which suggests successful layering of the anionic species. From surface microstructural analysis, bridging features between adjacent fibers of coatings were found; however, an increase in homogeneity and randomness was also observed as the number of layers increased. Thermogravimetric analysis further exposed that the incorporation of nanoclay tubes engenders substantial char residue at 700 °C up to 32.98%, while the decomposition rate decreased from 0.235% to 0.149%. Additionally, the flame-retardant properties were rigorously assessed using a vertical flame test: self-extinguishment behavior emerged in the C-25 and C-30 coated samples, while the other samples effectively resisted flame propagation. The results confirm the effectiveness of hybrid flame-retardant coating and offer a sustainable strategy for eliminating reliance on hazardous chemical additives.