Hanaa M. Ahmed

Prof. Hanaa M. Ahmed

Shoubra Faculty of Engineering, Benha University, Egypt

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 December 2020 in Materials
Verified
Journal Article
Open access
PDF file
Diaa-Eldin A. MansourDiaa-Eldin A. Mansour
Diaa-Eldin A. Mansour
NANagat Abdel-Gawad
Nagat Abdel-Gawad
ADAdel El Dein
Adel El Dein
Hanaa M. AhmedHanaa M. Ahmed
Hanaa M. Ahmed
Mohamed M. F. DarwishMohamed M. F. Darwish
Mohamed M. F. Darwish
Matti LehtonenMatti Lehtonen
Matti Lehtonen
Polymer nanocomposites used in underground cables have been of great interest to researchers over the past 10 years. Their preparation and the dispersion of the nanoparticles through the polymer host matrix are the key factors leading to their enhanced dielectric properties. Their important dielectric properties are breakdown strength, permittivity, conductivity, dielectric loss, space charge accumulation, tracking, and erosion, and partial discharge. An overview of recent advances in polymer nanocomposites based on LDPE, HDPE, XLPE, and PVC is presented, focusing on their preparation and electrical properties.

1 August 2020 in High Voltage
Verified
Journal Article
Open access
PDF file
NANagat M.K. Abdel‐Gawad
Nagat M.K. Abdel‐Gawad
ADAdel Z. El Dein
Adel Z. El Dein
DMDiaa‐Eldin A. Mansour
Diaa‐Eldin A. Mansour
Hanaa M. AhmedHanaa M. Ahmed
Hanaa M. Ahmed
Mohamed M. F. DarwishMohamed M. F. Darwish
Mohamed M. F. Darwish
MLMatti Lehtonen
Matti Lehtonen
The current study aims to develop polyvinyl chloride (PVC) nanocomposites with enhanced electrical and mechanical properties by incorporating titanium oxide (TiO 2 ) nanoparticles within PVC chains. Different loading of nanoparticles and different nanoparticle surface states were considered. The surface states are unfunctionalised, functionalised using vinyl silane and functionalised using amino silane. The choice of a most suitable surface state was a critical factor that guarantees a good dispersion of nanoparticles and consequently enhances the compatibility between TiO 2 and PVC matrix. The process followed in the PVC/TiO 2 nanocomposites preparation, loaded with different wt.% of TiO 2 nanoparticles, was the solvent method. The dielectric properties measured here were the relative permittivity ( ɛ r ), dielectric loss (tan δ ), breakdown strength (AC and DC under uniform field) and the internal partial discharges (PDs) within insulation cavity. All measurements have been performed under room temperature and at frequency ranged from 20 to 1.0 MHz. Furthermore, the mechanical properties of the samples like elongation, elasticity modulus and tensile strength were also studied. Vinyl silane showed better improvements in both electrical and mechanical performances compared to the amino silane, especially in cases of high weight fractions of TiO 2 . This is because of the improvement in the PVC‐TiO 2 interfacial region arise from the similarity of polarity and surface tension values of vinyl silane with that of PVC matrix and TiO 2 nanoparticles.

1 October 2018 in Electric Power Systems Research
Verified
Journal Article
Closed access
NANagat M.K. Abdel-Gawad
Nagat M.K. Abdel-Gawad
AMAdel Mohamed
Adel Mohamed
Diaa-Eldin A. MansourDiaa-Eldin A. Mansour
Diaa-Eldin A. Mansour
Hanaa M. AhmedHanaa M. Ahmed
Hanaa M. Ahmed
Mohamed M. F. DarwishMohamed M. F. Darwish
Mohamed M. F. Darwish
MLMatti Lehtonen
Matti Lehtonen

1 September 2019 in IET Science, Measurement & Technology
Verified
Journal Article
Open access
PDF file
Diaa-Eldin A. MansourDiaa-Eldin A. Mansour
Diaa-Eldin A. Mansour
ESEssam M. Shaalan
Essam M. Shaalan
SWSayed A. Ward
Sayed A. Ward
AMAdel Mohamed
Adel Mohamed
HKHesham Said Karaman
Hesham Said Karaman
Hanaa M. AhmedHanaa M. Ahmed
Hanaa M. Ahmed
To improve the performance and increase the lifetime of oil‐filled transformers, the thermal and dielectric properties of the transformer oil should be enhanced. Recently, nanotechnology was used as an effective science in the field of transformer oil development. In this study, barium titanate (BT) nanoparticles were inserted into the base transformer oil by a concentration of 0.005 g/L as an individual nanofluid sample (INFS). This insertion enhances the heat transfer coefficient by 33% but the breakdown voltage (BDV) was decreased by >10%. To overcome this problem of dielectric properties degradation, other three hybrid nanofluid samples (HNFS) were prepared using three different types of metal oxide (MO) nanoparticles; titania, alumina, and silica. These samples were prepared by adding a concentration 0.01 g/L of MO nanoparticles together with 0.005 g/L of BT nanoparticles into the oil. The thermal and dielectric properties of HNFS were measured to study the behaviour of nanoparticles hybridisation on transformer oil properties. HNFS using titania nanoparticles provided the best composition regarding either BDV or heat transfer coefficient. Dynamic light scattering (DLS) technique was used to evaluate the particle size distribution of hybrid nanoparticles and to clarify the corresponding physical mechanisms behind the obtained enhancement.

1 December 2017 in IEEE Transactions on Dielectrics and Electrical Insulation
Verified
Journal Article
Closed access
NANagat M. K. Abdel-Gawad
Nagat M. K. Abdel-Gawad
AMAdel Mohamed
Adel Mohamed
Diaa-Eldin A. MansourDiaa-Eldin A. Mansour
Diaa-Eldin A. Mansour
Hanaa M. AhmedHanaa M. Ahmed
Hanaa M. Ahmed
Mohamed M. F. DarwishMohamed M. F. Darwish
Mohamed M. F. Darwish
MLMatti Lehtonen
Matti Lehtonen
The current study is to investigate the influence of inserting chemically modified titanium oxide (TiO 2 ) nanoparticles on the dielectric and mechanical properties of the commercial compound Polyvinyl Chloride (PVC) used in insulating power cables. The surface modification of TiO 2 nanoparticles was performed using vinyl silane coupling agent after activating their surfaces with methane-sulfonic acid. The PVC pellets were first dissolved using suitable solvent. Then, PVC/TiO 2 nanocomposites, with different loadings of nanoparticles, were synthesized with the aid of ultra-sonication for better dispersion of nanoparticles. The morphology of the prepared nanocomposites was studied by field emission scanning electron microscopy (FE-SEM), and their mechanical properties were studied by performing tensile test at speed of 50 mm/min. The results showed that the insertion of functionalized nanoparticles is able to increase the tensile strength and the Young's modulus of the prepared samples, however it decreases their elongation. The dielectric properties, such as dielectric constant and dielectric loss, were also studied in a range of frequencies between 20 Hz and 1 MHz. Moreover, AC breakdown voltage of prepared samples was measured under uniform and semi-uniform field, and then, AC dielectric strength was evaluated using Finite Element Method (FEM) for semi-uniform field. For further evaluation, DC breakdown voltage was also measured under uniform field. PVC/TiO 2 nanocomposites with functionalized TiO 2 exhibited better dielectric properties compared to that with un-functionalized TiO 2 or that of base PVC. This may be attributed to the low surface energy of the functionalized TiO 2 nanoparticles that prevented the agglomeration of nanoparticles and restricted the mobility of polymeric chains.

1 January 2019 in IET Science, Measurement & Technology
Verified
Journal Article
Open access
PDF file
NANagat M.K. Abdel‐Gawad
Nagat M.K. Abdel‐Gawad
AMAdel Mohamed
Adel Mohamed
Diaa-Eldin A. MansourDiaa-Eldin A. Mansour
Diaa-Eldin A. Mansour
Hanaa M. AhmedHanaa M. Ahmed
Hanaa M. Ahmed
Mohamed M. F. DarwishMohamed M. F. Darwish
Mohamed M. F. Darwish
Matti LehtonenMatti Lehtonen
Matti Lehtonen
This study aims to develop large‐scale polyvinyl chloride (PVC) nanocomposites for industrial application with power cables. To achieve this goal, PVC/silicon dioxide and PVC/titanium dioxide nanocomposites were fabricated with two different loadings of nanoparticles: 0.3 and 0.6 wt.%, in the presence of a suitable coupling agent that was used to reduce the agglomeration of nanoparticles and enhance the compatibility with polymer matrix. The coupling agent used in this study was the amino silane, and the process followed in the nanocomposites preparation was the melt blending method. The dielectric properties of these synthesised nanocomposites were studied by measuring the AC dielectric breakdown strength under the uniform field, then compared with the simulation results. The relative permittivity ( ɛ r ), loss tangent (tan δ ), and DC electrical conductivity ( σ ) were also measured under frequencies ranging from 20 Hz to 1 MHz. In addition, the internal discharge measurements are performed using the traditional needle‐plane configuration with the help of phase‐resolved partial discharge (PD) analyser. This technique is used to analyse the PDs activity with respect to the phase angle of the applied voltage. It was found that the dielectric breakdown strength and PD resistance of the prepared samples are increased higher than that of the neat PVC; however, the ɛ r , tan δ , and σ at 50 Hz are decreased.