In this work, NiCo2S4–graphene hybrids (NCS@G) with high electrochemical performance were prepared using a hydrothermal method. The response surface methodology (RSM), along with a central composite design (CCD), was used to investigate the effect of independent variables (G/NCS, hydrothermal time, and S/Ni) on the specific capacitances of the NCS@G/Ni composite electrodes. RSM analysis revealed that the developed quadratic model with regression coefficient values of more than 0.95 could be well adapted to represent experimental results. Optimized preparation conditions for NCS@G were G/NCS = 6.0%, hydrothermal time = 10.0, and S/Ni = 6.0 of NCS@G (111) sample. The maximum specific capacitance of NCS@G (111)/Ni fabricated at the optimal condition is about 216% higher than the best result obtained using the conventional experimental method. The enhanced capacitive performance of the NCS@G (111) sample can be attributed to the synergistic effect between NCS nanoparticles and graphene, which has the meso/macropores conductive network and low diffusion resistance. Notably, the NCS@G (111) could not only provide numerous reaction sites but also prevent the restacking of graphene layers. Furthermore, a supercapattery cell was fabricated with an (G + AC)/Ni anode, a NCS@G (111)/Ni cathode, and a carboxymethyl cellulose–potassium hydroxide (CMC-KOH) gel electrolyte. The NCS@G (111)//(G + AC) demonstrates an outstanding energy density of 80 Wh kg−1 at a power density of 4 kW kg−1, and a good cycling performance of 75% after 5000 cycles at 2 A g−1. Applying the synthesis strategy of RSM endows remarkable capacitive performance of the hybrid materials, providing an economical pathway to design promising composite electrode material and fabricate high-performance energy storage devices.
For core materials with fast response times and adjustable power and energy output for energy storage, we herein report the electrochemical performance and latent hydrogen evolution reaction of sheaf-like carbon nanotube (s-CNT) based material electrodes, aiming for further low-cost synthesis and environmentally friendly supercapacitor applications. XPS scanning spectra show C, O, and a few Mo elements with estimated contents of 82.3, 17.2, and 0.5 at%, respectively. The maximum capacitance of 1287 F g ‒1 is achieved in the s-CNT-based electrochemical double-layer capacitor (EDLC) due to slow ion diffusion in the s-CNT-based electrode during charging and discharging. The Bode phase angle at 80.1° of the s-CNT electrode is close to 90°, and the prepared s-CNT electrode illustrates ideal EDLC capacitance behavior. In addition, the s-CNT electrode, after 2000 subsequent CV and GCD cycles at a current density of 0.95 A g ‒1 , retains specific capacitance of 96.8% and 80.55%, respectively. The s-CNT electrode exhibits reduced ionic resistance and facilitates ion transport through its conductive architecture, demonstrating its potential as a high-performance material for prospective EDLC supercapacitor applications.