To meet the United Nations' sustainable development goal of affordable and clean energy, there has been a growing need for low-cost, green, and safe energy storage technologies. High-field and energy-density capacitors have gained substantial attention from academics and industry, particularly for power electronics, where they will play a key role in optimising the performance of management systems in electric vehicles. The key figure of merit, energy density (Wrec), for high-field applications has dramatically increased year-on-year from 2020 to 2024, as evidenced by over 250 papers, demonstrating ever larger Wrec values. This review briefly introduces the background and principles of high energy density ceramics, but its focus is to provide constructive and comprehensive insight into the evaluation of Wrec, Emax, ΔP, and η, and more importantly, the normalised metrics, Wrec/Emax and Wrec/ΔP in lead-free dielectric ceramics. We also present several optimisation strategies for materials modification and process innovation that have been recently proposed before providing perspectives for the further development of high-field and high-energy density capacitors.
8 June 2023 in Materials Science and Engineering: B
Sr1-xGdxTiO3 (0.00 ≤ x ≤ 0.11) ceramics by the addition of Gd3+ on A-sites, were processed and fabricated through the conventional sintering method and optimised the sintering temperature at 1390 °C–1470 °C for 2 h. The experimentation shows that all ceramics are possessed by cubic structure, in which the increment of Gd3+ content, in terms of x, decreases the lattice parameters of the ceramics, as well as affects the grain size. Comparing the results to pure SrTiO3 (STO) compounds, the addition of Gd3+ lowers the mass loss, increased the conductivity as well as permittivity by decreasing the dielectric losses at lower frequencies. The x = 0.03 and 0.01 evidenced the maximum Seeback Coefficient, ∼281 μV K−1 at ∼370 K confirming the higher carrier concentration. Also, the magnetic properties as a function of Gd3+ ions doped with STO showed gradual improvement, showing maximum saturation with the maximum concentration of x.
With continuous progress in science and technology, we are facing more problems too. One of the biggest problems is the allocation or decomposition of materials when they come to their end i.e., the waste materials. In this study, we employed plastics and glass waste, as well as organic wastes, and eggshells, to test the influence of casting and melting procedures on ordinary concrete bricks in this research. As per the results, the density of the brick reduces to ~20% when the cement is replaced with 10% ESP and 20% GP and 86% when replaced with 25% plastic in the sand (PolySand Bricks), whereas the durability of all the compositions came under the heavy load-bearing bricks category (~6%). Furthermore, the 10% ESP-based bricks show the maximum compressive strength (~18%), whereas the 25% Plastic replaced PolySand bricks showed (~9%) strength, which makes them suitable for use in pavements.
26 March 2026 in Journal of Advanced Electronic Materials
This study focuses on the solid-state processing optimization of SrTi\(_{1-x}\)Fe\(_x\)O\(_3\) (STFO) ceramics with \(0.00 \leq x \leq 0.11\). X-ray diffraction reveals a single-phase cubic structure (space group Pm\(\bar{3}m\)) with lattice constant \(a = b = c = 3.91{Å}\) and a maximum relative density of \(\sim\)94%. SEM confirms well-formed grains in both pure and Fe\(^{3+}\)-doped SrTiO\(_3\). TGA/DSC indicates low weight loss and high thermal stability for the \(x = 0.09\) composition. Electrical conductivity increases with frequency, accompanied by higher dielectric losses for \(x = 0.09\) and \(x = 0.11\). FTIR verifies the Ti-O octahedral stretching frequency at \SI{530}{\cm^{-1}}, consistent with the cubic perovskite structure. The maximum Seebeck coefficient is observed at \(x = 0.09\), aligning with electrical data and confirming semiconducting behavior. Notably, calcined powders exhibit soft ferromagnetic loops, whereas sintered solids display antiferromagnetic loops, revealing intriguing magnetic properties. Overall, the optimized \(x = 0.09\) composition shows significant promise for applications requiring enhanced electrical and magnetic characteristics.