The intracavity optical tweezers is a new, to the best of our knowledge, cavity optomechanics system, implementing a self-feedback control of the particle’s position by trapping the particle inside an active ring cavity. This self-feedback mechanism efficiently constructs a novel potential in the cavity. Here we predict and give experimental evidence for the self-feedback induced optical bistability in dual-beam intracavity optical tweezers. Then the characteristics of these bistable potential wells are investigated. The results show that we can prevent the bistable behaviors from destabilizing the trapping stability through tuning the foci offset of two propagating beams in the cavity. This contributes to the use of intracavity optical tweezers as a powerful tool for optical manipulation. Importantly, the thermally activated transition of the trapped particle in the bistable potential is observed for particular experimental parameters. Further investigation of this phenomenon could underlie the mechanism of many metastable-related processes in physics, chemistry, and biology.
In 1905, Einstein pioneered the explanation of photoelectric effect through quantum optics, thereby establishing wave–particle duality.1 This discovery revealed that light possesses both momentum and energy, enabling it to exert pressure on irradiated objects.2 In 1960, Theodore Maiman, an American physicist, developed the world’s first ruby laser.3 The laser’s intense and collimated light advanced research on photon momentum and contributed to the development of optical tweezers.4,5 In 1986, Arthur Ashkin utilized a single, highly focused laser beam to trap micron-sized particles successfully in the liquid environment, thus creating optical tweezers technology,4,6 which has since been refined and expanded continuously.7–10 In fact, as early as 1970, Ashkin had successfully trapped silica microspheres using two opposing Gaussian beams.4 Compared with single-beam optical tweezers, dual-fiber optical traps exhibit distinct force balance characteristics.11 The combined effects of perpendicular and horizontal forces significantly contribute to the capture of the microsphere, making dual-fiber optical traps more stable while requiring less force.12,13
High-resolution displacement detection can be achieved by analyzing the scattered light of the trapping beams from the particle in optical tweezers. In some applications where trapping and detecting beams must be separated, a detecting beam can be introduced for independent displacement measurement. However, the detecting beam focus possibly deviates from the center of the particle, which will affect the performance of displacement detection. Here, we detect the displacement of the particle by utilizing the forward scattered light of the detection beam from the particle. The effects of the lateral and axial offsets between the detection beam focus and the particle center on displacement detection are analyzed by the simulation and experiment. These results show that the lateral offsets will decrease the detection sensitivity and linear range. Moreover, it aggravates the crosstalk between the x-direction signal and the y-direction signal of the quadrant photodiode. Besides, the axial offsets also affect the detection sensitivity. More interestingly, an optimal axial offset can improve the sensitivity of displacement detection substantially. In addition, the influence of system parameters, such as particle radius a, numerical aperture of the condenser NAc, and numerical aperture of the objective NAo, on the optimal axial offset is also discussed. This work not only provides ideas for improving the performance of precision measurement by the method of forward scattered light detection but also expands the application of this method in fundamental physics.
In dual-fiber optical traps, two counter-propagating laser beams emitted from opposing laser fibers trap and manipulate particles. We describe the operation and performance of a dual-fiber optical trap created using spherical-tapered ended fiber pigtailed to 1436 nm laser diodes. Compared with the dual flat ended fiber optical trap, the dual spherical-tapered ended fiber optical trap increased the axial stiffness from 0.44 pN/µm to 0.99 pN/µm, and increased the lateral stiffness from 1.68 pN/µm to 1.76 pN/µm. The dual-fiber optical trap fabricated by spherical-tapered ended fiber enhanced the trapping efficiency of the optical trap. It expanded the application range and reliability of the dual-fiber optical trap. Additionally, we integrated the dual-fiber optical trap into an optical chip, thereby improving the stability of the system.
In a dual-fiber optical trap system, precise alignment of the fibers is critical for trapping efficiency. Any transverse or angular misalignment will significantly affect operational effectiveness. We conduct simulations and analyses of the force and motion trajectory of a 5-μm radius microsphere within a dual-fiber optical trap, considering the angular misalignment and flow velocity of the ambient liquid. We demonstrate that with the increase in misalignment angle, the motion of the microsphere shifts among stable capture, spiral motion, orbital rotation, and escape states. Furthermore, the motion state of captured microspheres is influenced by the flow velocity of the ambient liquid. We enrich the motion model of microspheres in dual-beam optical traps within microfluidic chips and pave the way for the measurement of liquid velocity and viscosity in the microfluidic chip.