Hyun Soo Kim

Dr. Hyun Soo Kim

School of Mechanical Engineering, Pusan National University, Busan, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 October 2022 in Journal of Healthcare Engineering
Verified
Journal Article
Open access
PDF file
JJJae-Gyeong Jeong
Jae-Gyeong Jeong
SUNGWOOK KANGSUNGWOOK KANG
SUNGWOOK KANG
GJGu-Hee Jung
Gu-Hee Jung
MCMingoo Cho
Mingoo Cho
Hyun Soo KimHyun Soo Kim
Hyun Soo Kim
JHJong-moon Hwang
Jong-moon Hwang
Intervertebral discs are fibrocartilage structures, which play a role in buffering the compression applied to the vertebral bodies evenly while permitting limited movements. According to several previous studies, degenerative changes in the intervertebral disc could be accelerated by factors, such as aging, the female sex, obesity, and smoking. As degenerative change progresses, the disc height could be reduced due to the dehydration of the nucleus pulposus. This study aimed to quantitatively analyze the pressure that each structure of the spine receives according to the change in the disc height and predict the physiological effect of disc height on the spine. We analyzed the biomechanical effect on spinal structures when the disc height was decreased using a finite-element method investigation of the lumbar spine. Using a 3D FE model, the degree and distribution of von-Mises stress according to the disc height change were measured by applying the load of four different motions to the lumbar spine. The height was changed by dividing the anterior and posterior parts of the disc, and analysis was performed in the following four motions: flexion, extension, lateral bending, and axial rotation. Except for a few circumstances, the stress applied to the structure generally increased as the disc height decreased. Such a phenomenon was more pronounced when the direction in which the force was concentrated coincided with the portion where the disc height decreased. This study demonstrated that the degree of stress applied to the spinal structure generally increases as the disc height decreases. The increase in stress was more prominent when the part where the disc height was decreased and the part where the moment was additionally applied coincided. Disc height reduction could accelerate degenerative changes in the spine. Therefore, eliminating the controllable risk factors that cause disc height reduction may be beneficial for spinal health.

13 December 2025 in Materials
Verified
Journal Article
Open access
PDF file
Hyun Soo KimHyun Soo Kim
Hyun Soo Kim
MCMingoo Cho
Mingoo Cho
DLDongwook Lee
Dongwook Lee
FLFirst95 Lee
First95 Lee
JKJaewoong Kim
Jaewoong Kim
SUNGWOOK KANGSUNGWOOK KANG
SUNGWOOK KANG
Thermal runaway (TR) in lithium-ion batteries presents a significant safety hazard for electric vehicles (EVs), often resulting in fire or explosion. Mitigating TR requires thermal-protection strategies capable of delaying or suppressing heat propagation within battery pack cases (BPCs). This study proposes a flame-retardant BPC design and evaluates its effectiveness through a combined approach using CFD-based thermal analysis and multiscale experimental validation. In the CFD model, a heat-source temperature of 1107 °C was applied to simulate the thermal load during TR, together with a coolant flow rate of 17 L/min. Material-level verification was conducted through high temperature specimen tests, in which flame-retardant pads were heated to a target of 1100 °C with an allowable tolerance of ±10% for 5 min; the unheated (backside) temperature remained below 160 °C. Full-scale assessment involved heating the BPC upper case at temperatures exceeding 500 °C for 10 min, where the backside temperature remained below 150 °C. Module-level TR experiments further confirmed that the flame-retardant layer reduced the external temperature from 240–260 °C to below 150 °C. The results demonstrate that the proposed design effectively delays thermal penetration and maintains external safety thresholds, offering practical guidelines for developing safer EV battery systems.

18 December 2025 in Materials
Verified
Journal Article
Open access
PDF file
Hyun Soo KimHyun Soo Kim
Hyun Soo Kim
MCMingoo Cho
Mingoo Cho
FLFirst95 Lee
First95 Lee
JKJaewoong Kim
Jaewoong Kim
SUNGWOOK KANGSUNGWOOK KANG
SUNGWOOK KANG
Electric vehicle (EV) battery pack cases (BPCs) must withstand mechanical loads such as impact, compression, and vibration to ensure structural integrity and passenger safety. This study evaluates the mechanical durability of a full-scale aluminum BPC using combined experimental testing and finite element analysis (FEA). A bottom impact test, 200 kN compression test, and power spectral density (PSD)-based random vibration test were conducted to simulate representative operating and handling conditions. The numerical model replicated boundary conditions and load profiles identical to the experiments, enabling a direct comparison of stress distribution and deformation characteristics. The results demonstrated that stress and displacement trends predicted by FEA closely matched experimental observations, with stress concentrations appearing at corner and frame junction regions and less than 1 mm deformation recorded under peak compression loading. Vibration responses were most pronounced in the vertical direction, without bolt loosening or structural damage. These results verify the reliability of the proposed BPC design and provide quantitative evidence supporting simulation-driven lightweight battery enclosure development.

Verified
Journal Article
Open access
PDF file
Hyun Soo KimHyun Soo Kim
Hyun Soo Kim
MCMingoo Cho
Mingoo Cho
AKA Kwak
A Kwak
KCKiseok Choi
Kiseok Choi
JPJang-Ik Park
Jang-Ik Park
SUNGWOOK KANGSUNGWOOK KANG
SUNGWOOK KANG
Ro-Ro (Roll-on/Roll-off) vessels require adaptable deck systems to efficiently accommodate vehicles of varying sizes. Conventional fixed or hydraulically lifted car decks often face challenges related to structural efficiency, maintainability, and limited flexibility. To address these issues, this study proposes a novel hoistable car deck system that incorporates a hinge-based folding mechanism and modular connections. The design enhances maintainability, allows independent adjustment of deck panels without external lifting equipment, and improves adaptability to diverse ship layouts. In addition, the proposed concept was systematically evaluated to verify its structural integrity and serviceability under representative loading conditions, highlighting its compliance with classification society requirements. These results suggest that the hinge-based modular deck provides a promising solution for next-generation Ro-Ro vessels, offering both operational flexibility and improved efficiency while paving the way for practical applications in shipbuilding and retrofitting projects.

14 April 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SUNGWOOK KANGSUNGWOOK KANG
SUNGWOOK KANG
Hyun Soo KimHyun Soo Kim
Hyun Soo Kim
JKJaewoong Kim
Jaewoong Kim
JHJong-moon Hwang
Jong-moon Hwang
WLWonhee Lee
Wonhee Lee
HRHyunsu Ryu
Hyunsu Ryu
Conventional medical equipment used for treating patients with ischemic heart disease relies on pneumatic compression to achieve intense and instantaneous compression of the legs. Because the pneumatic operation of a compressor inevitably produces noise, the treatment is given to a patient in a separate room to avoid causing discomfort to other patients. This need for a dedicated treatment room could be another source of increased medical costs. In this study, a new electrical motor-driven system was developed to address the noise problem of existing pneumatic compression devices. Additionally, the new system features a reduced footprint and weight, and can be carried by medical staff. To develop a low-noise leg compression machine, the noise level at the surface of the structure was estimated using multibody dynamics simulation. Based on the initial design of the electric leg compression machine, parameters including assembly tolerance, component material, and shape of the structure were adjusted to prepare variations of the initial design, and their noise characteristics were analyzed. It was found that by applying the design variables, the noise levels were reduced by 7.2–11.7% compared with the initial design. The most significant reduction in noise levels was 11.7% and was achieved by reinforcing the section surrounding the gearbox enclosing a noise source.

1 March 2025 in Journal of the Korean Society for Precision Engineering
Verified
Journal Article
Closed access
Hyun Soo KimHyun Soo Kim
Hyun Soo Kim
JKJung Su Kim
Jung Su Kim
Ji Hoon KimJi Hoon Kim
Ji Hoon Kim
SUNGWOOK KANGSUNGWOOK KANG
SUNGWOOK KANG
This study presents results of Computational fluid dynamics (CFD) analysis conducted to evaluate performances of various functional products developed for smart bathroom systems. The primary objective was to analyze the efficiency of space heating, direct drying, and dehumidification functions in a winter bathroom environment. Representative bathroom models in South Korea were selected and detailed CFD simulations were performed on these models. Results showed that bathtub models exhibited higher efficiency overall in space heating and dehumidification than shower booth models. This was attributed to differences in bathroom structure and internal air flow. Additionally, the direct drying function showed higher efficiency in bathtub models, determined by the placement of air outlets and inlets. This study provides essential foundational data that can contribute to the design and enhancement of smart bathroom systems' functionality, offering valuable insights for the development of optimized smart bathroom products.