Iacopo Bianchi

Dr. Iacopo Bianchi

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 January 2024 in Journal of Cleaner Production
Verified
Journal Article
Open access
IBIacopo Bianchi
Iacopo Bianchi
SVStelladriana Volpe
Stelladriana Volpe
FFFrancesco Fiorito
Francesco Fiorito
Archimede ForcelleseArchimede Forcellese
Archimede Forcellese
Valentino SangiorgioValentino Sangiorgio
Valentino Sangiorgio

13 March 2022 in Materials and Manufacturing Processes
Verified
Journal Article
Closed access
IBIacopo Bianchi
Iacopo Bianchi
Archimede ForcelleseArchimede Forcellese
Archimede Forcellese
Tommaso ManciaTommaso Mancia
Tommaso Mancia
Michela SimonciniMichela Simoncini
Michela Simoncini
Alessio VitaAlessio Vita
Alessio Vita
The present study aims at investigating the effect of process parameters on environmental sustainability of 3D printing of short fiber-reinforced polymer composites. A preliminary study allowed defining the printing parameters, in terms of printing speed, extrusion temperature and layer thickness, which guarantee low energy consumption. Then, the environmental behavior of two 3D printable composite materials, glass fiber-reinforced (GlassPA) and carbon fiber-reinforced (CarbonPA) polyamide, was investigated using the Life Cycle Assessment methodology, to provide a comprehensive overview of the considered materials and to support the sustainable development of industrial additive manufacturing processes. The functional unit was chosen taking into account the mechanical properties of the two short fiber-reinforced composites. To this purpose, tensile and flexural tests were performed on specimens produced by Fused Filament Fabrication process to evaluate the mechanical properties of printed materials. Scanning electron microscopy was used to observe the different filament morphology affecting the materials performances. Experimental tests showed that CarbonPA exhibits mechanical performances higher than those of GlassPA. Due to the weight reduction that can be accomplished by means of carbon fibers, CarbonPA results the most environmentally friendly alternative in tensile loads applications. On the contrary, for flexural loads applications, GlassPA exhibits lower environmental footprint.

29 March 2023 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
IBIacopo Bianchi
Iacopo Bianchi
AFArchimede Forcellese
Archimede Forcellese
Michela SimonciniMichela Simoncini
Michela Simoncini
AVAlessio Vita
Alessio Vita
Ethylene vinyl acetate (EVA) is a thermoplastic material largely used in the footwear industry. Indeed, it is employed to produce outsoles and midsoles with high shock absorption. For producing these parts of the shoes, EVA is injected into a heated mold. During this process, gates and runners, which are necessary to allow a correct infill of the mold, are generated and they are treated as scraps and disposed in landfill. In this paper, a method for recovering pre-vulcanized EVA waste is presented and the possibility of developing a recycled product is investigated. EVA waste was shredded and dispersed into virgin EVA with a weight content of 10%. This mixture was employed in an injection molding process to produce samples for characterizing tensile, compression, and abrasion resistances and compare them with those of virgin EVA. At the same time, the environmental sustainability of the recovery process was evaluated through the standard methodology of Life Cycle Assessment (LCA) by comparing the production of recovered outsoles with traditional virgin ones. The LCA was paired with a Life Cycle Costing analysis to quantify possible economic benefits of the innovative system. Even though the resistances are quite lower than the virgin EVA, the recycled one demonstrates remarkable benefits in terms of environmental and cost sustainability, paving the way for a zero-waste system to produce outsoles and, more in general, EVA components.

19 January 2024 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
IBIacopo Bianchi
Iacopo Bianchi
Tommaso ManciaTommaso Mancia
Tommaso Mancia
CMChiara Mignanelli
Chiara Mignanelli
Michela SimonciniMichela Simoncini
Michela Simoncini
A widespread problem of manufacturing processes is represented by the occurrence of tool wear that can lead to both poor surface finish and poor mechanical properties in the workpiece. This issue affects also additive manufacturing technologies such as the material extrusion technique. In this process, the wear mechanisms of the extrusion nozzle can be severe, in particular when materials with a high abrasive capacity, such as carbon fiber-reinforced polymers, are 3D printed. Despite the significance of this problem, scientific literature lacks systematic evaluations of nozzle wear and its correlation with parts mechanical properties. In this framework, the present paper aims at investigating the effect of the nozzle wear evolution on the mechanical properties of additively manufactured parts in short carbon fiber-reinforced polyamide. To this purpose, 3D printing processes were performed. The time dependence of the nozzle wear was analyzed by interrupting the additive manufacturing process at fixed time intervals. To analyze the effect of nozzle wear on the mechanical performances of printed parts, tensile specimens were 3D printed and tested at room temperature. A reduction in mechanical performances of the printed samples and a worsening in the surface quality were observed with increasing the nozzle wear. Optical microscopy investigation and X-ray computed tomography were used to monitor the external and internal nozzle wear evolution. The surface roughness measurements were performed to evaluate the surface quality of the 3D printed parts. Furthermore, the scanning electron microscopy was used to observe the three-dimensional topography of the longitudinal sections of filament in Carbon PA, at different printing time values, and fractured surfaces of tensile samples. This study can help to better understand nozzle wear and to predict tool service life for industrial applications. In addition, it can prompt future studies focused on the reduction of tool wear.

15 October 2025 in Journal of Cleaner Production
Verified
Journal Article
Open access
IBIacopo Bianchi
Iacopo Bianchi
Archimede ForcelleseArchimede Forcellese
Archimede Forcellese
ITIman Taha
Iman Taha

20 May 2023 in Journal of Cleaner Production
Verified
Journal Article
Open access
IBIacopo Bianchi
Iacopo Bianchi
AFArchimede Forcellese
Archimede Forcellese
Michela SimonciniMichela Simoncini
Michela Simoncini
Alessio VitaAlessio Vita
Alessio Vita
LDLucia Delledonne
Lucia Delledonne
VCVincenzo Castorani
Vincenzo Castorani