Iliyan Mitov

Dr. Iliyan Mitov

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 July 2025 in Journal of Chemical Technology and Metallurgy
Verified
Journal Article
Open access
PDF file
ASAni Stoilova
Ani Stoilova
IMIliyan Mitov
Iliyan Mitov
RGRositsa Gavrilova
Rositsa Gavrilova
BYBoyan Yordanov
Boyan Yordanov
The study presents calcination of barite recovered from the gangue stored in the tailings dam at a metallurgical plant in Bulgaria with the aim to product BaSO4 with improved whiteness. The calcination was carried out in a rotary kiln at 1150⁰C under air. Samples from three batches of barite with different particle size, namely 40 µm, 20 µm and 6 µm, were processed and the color and brightness value of the product was measured. The residence time of the material in the kiln, respectively in the heated zone, was also determined. The results show that the brightness of the barite recovered from the gangue could be improved by 4 – 20 units through calcination.

7 March 2025 in Journal of Chemical Technology and Metallurgy
Verified
Journal Article
Open access
PDF file
BYBoyan Yordanov
Boyan Yordanov
IMIliyan Mitov
Iliyan Mitov
In present work abrasive wear resistance after heat treatment of a powder steel M390P with composition 1.9 % C, 0.7 % Si, 0.3 % Mn, 20.0 % Cr, 1.0 % Mo, 4 % V and 0.6 % W was investigated. Machine used for laboratory wear tests is a device that allows to imitate friction conditions in the exploataion of objects. Heat treatment consisting of quenching from 1070ºC in oil and tempering at 450ºC provides maximum hardness of HRC 59 units and suitable for details working at cutting and grinding without high impact load conditions. Quenching from 1150ºC with subsequent twice high temperature tempering at 550ºC achieves hardness of HRC 61. This heat treatment is good for abrasion wear resistance working blades. Hardening at 1070ºC and tempering at 450ºC show wear rate V = 3.6.10-5 g m-1 and E = 27778 m g-1 for abrasive wear resistance. The best parameter values ​​ are respectively V = 1.82.10-5 g m-1 and E = 54745 m g-1 after high temperature quenching at 1150oC and subsequent twice tempering at 550oC.

15 August 2025 in Materials
Verified
Journal Article
Open access
PDF file
YTYordanka Trifonova
Yordanka Trifonova
ASAni Stoilova
Ani Stoilova
DDDeyan Dimov
Deyan Dimov
GMGeorgi Mateev
Georgi Mateev
Vladislava Hristova IvanovaVladislava Hristova Ivanova
Vladislava Hristova Ivanova
OSOlya Surleva
Olya Surleva
Bulk chalcogenides from the system (GeTe4)1−xInx, where x = 0; 5 and 10 mol%, were synthesized by a two-step melt quenching technique. New layered composite materials based on them and the azo polymer [1-4-(3-carboxy-4-hydrophenylazo) benzensulfonamido]-1,2-ethanediyl, sodium salt] has been prepared through spin coating, electrospray deposition and via vacuum-thermal evaporation of the chalcogenide and spin coating of the azo polymer onto it. Using the latter technology, a material consisting of one chalcogenide and one azo polymer film and three chalcogenide and three azo polymer films has been fabricated. The carried-out SEM analysis shows that in the materials, initially prepared as a bilayer and multilayer structure, diffusion at the chalcogenide/polymer interface occurs leading to the formation of a homogenous composite environment. Birefringence was induced at 444 nm in all the fabricated thin film materials. The highest value of the maximal induced birefringence has been measured for the material fabricated as a stack, Δnmax = 0.118. For the material prepared as a bilayer structure and the composite material obtained through electrospray deposition, the maximal induced birefringence takes values of Δnmax = 0.101 and Δnmax = 0.095, respectively. The sample prepared via spin coating of the chalcogenide/PAZO dispersion has the lowest value of the maximal induced birefringence (Δnmax = 0.066) in comparison to the pure PAZO polymer film (Δnmax = 0.083).