This paper discusses approaches for verification of methods of measurements of chemical and physical characteristics of specific samples. The limitations of well-known approaches are discussed. Some examples of alternatives are given to demonstrate specific issues encountered in the research laboratory analyzing new materials or characterizing new properties of materials. Application of sequential procedure using lower quantities of samples and reagents is presented. A standard addition to solid samples is discussed. The approach of control charts for estimation of method uncertainty for determination of plant available phosphorus is presented. The method comparison is applied as an approach to verification of alkaline reactivity by inductively coupled plasma–optical emission spectroscopy (ICP-OES) measurement, as well as density of newly synthesized chalcogenide glass materials. The presented examples demonstrated that alternative approaches are needed in order to verify the methods applied due to the great variety of activities and corresponding tasks in a research laboratory.
Background: Specifically designed peptide mimetics offer higher selectivity regarding their toxicity to mammalian cells. In addition to the α-helix conformation, the specific activity is related to the peptide’s ability to penetrate the cell membrane. The alterations in lipid membrane properties were addressed in the presence of the peptide KLAKLAK-NH2 and analogs containing β-alanine, strengthening the antibacterial activity and/or naphtalimide with proven anticancer properties. Methods: The molecular interactions of the peptide mimetics with POPC bilayers were studied using FTIR-ATR spectroscopy. The thermal shape fluctuation analysis of quasispherical unilamellar vesicles was applied to probe the membrane bending elasticity. The impedance characteristics of bilayer lipid membranes were measured using fast Fourier-transform electrochemical impedance spectroscopy. Results: A lateral peptide association with the membrane is reported for β-alanine-containing peptides. The most pronounced membrane softening is found for the NphtG-KLβAKLβAK-NH2 analog containing both active groups that corroborate with the indications for 1,8-naphthalimide penetration in the lipid hydrophobic area obtained from the FTIR-ATR spectra analysis. The β-alanine substitution induces strong membrane-rigidifying properties even at very low concentrations of both β-alanine-containing peptides. Conclusions: The reported results are expected to advance the progress in tailoring the pharmacokinetic properties of antimicrobial peptides with strengthened stability towards enzymatic degradation. The investigation of the nonspecific interactions of peptides with model lipid membranes is featured as a useful tool to assess the antitumor and antimicrobial potential of new peptide mimetics.
Chalcogenide alloys of As2Se3-Ag2Te-GeTe were synthesized using the melt-quenching technique. By the visual and XRD analyses, the state of obtaining alloys was proven (glass, crystalline, glass + crystalline), and the glass formation region in the system was established. The thermal characteristics of some samples were determined—temperatures of glass transition (Tg); crystallization (Tcr); and melting (Tm). The basic physicochemical parameters, such as density (d) and Vickers microhardness (HV), were measured. Compactness (C), as well as some thermomechanical characteristics, such as module of elasticity (E), volume (Vh), and formation energy (Eh) of micro-voids, were calculated, and the influence of the composition on these characteristics was investigated. The addition of silver telluride resulted in a decrease in Tg and HV values and an increase in d and Vh values. No thermochemical effects of crystallization or melting were detected in some of the alloys. The obtained results were in agreement with the available literature data for similar systems.
Chalcogenide glasses have broad applications in the mid-infrared optoelectronics field and as phase-change materials (PCMs) due to their unique properties. Chalcogenide glasses can have crystalline and amorphous phases, making them suitable as PCMs for reversible optical or electrical recording. This study provides an in-depth analysis of the evaporation kinetics of indium-doped chalcogenides, GeTe4 and GeTe5, using the physical vapor deposition technique on glass substrates. Our approach involved a detailed examination of the evaporation process under controlled temperature conditions, allowing precise measurement of rate changes and energy dynamics. This study revealed a significant and exponential increase in the evaporation rate of GeTe4 and GeTe5 with the introduction of indium, which was particularly noticeable at higher temperatures. This increase in evaporation rate with indium doping suggests a more complex interplay of materials at the molecular level than previously understood. Furthermore, our findings indicate that the addition of indium affects the evaporation rate and elevates the energy requirements for the evaporation process, providing new insights into the thermal dynamics of these materials. This study’s outcomes contribute significantly to understanding deposition processes, paving the way for optimized manufacturing techniques that could lead to more efficient and higher-performing optoelectronic devices and memory storage solutions.
9 September 2024 in Journal of Chemical Technology and Metallurgy
This study employs density functional theory (DFT) and molecular dynamics to meticulously investigate the structural and electronic properties of ternary chalcogenide compounds, specifically (GeTe4 ) 1-x Inx, and (GeTe5 )1-x Inx across a range of compositions ( x = 0, 5, 10, 15, 20 at %). Utilizing the local density approximation within the framework of first-principles calculations, we comprehensively analyze the pair correlation function, static structural factor, electronic density of states, and electronic band gap energy. Our results reveal a notable decrease in the energy band gap of Germanium-Tellurium with the incorporation of Indium atoms. The structural changes observed in the Ge-Te matrix with Indium doping, as evidenced by the changes in the pair correlation function and static structure factor, are consistent with and supportive of the observed decrease in the band gap energy. This phenomenon is primarilyattributed to the significant contribution of Indium atoms to the conduction band edge, offering new insights into the material’s electronic behaviour.
New bulk chalcogenides from the system (GeTe6)1−xCux, where x = 5, 10, 15 and 20 mol%, have been synthesized. The structure and composition of the materials were studied using X-ray powder diffraction (XRD) and energy-dispersive spectroscopy (EDS). Scanning electron microscopy (SEM) was applied to analyze the surface morphology of the samples. Some thermal characteristics such as the glass transition, crystallization and melting temperature and some physico-chemical properties such as the density, compactness and molar and free volumes were also determined. The XRD patterns show sharp diffraction peaks, indicating that the synthesized new bulk materials are crystalline. The following four crystal phases were determined: Te, Cu, CuTe and Cu2GeTe3. The results from the EDS confirmed the presence of Ge, Te and Cu in the bulk samples in concentrations in good correspondence with those theoretically determined. A layered thin-film material based on Ge14Te81Cu5, which exhibits lower network compactness compared to the other synthesized new chalcogenides, and the azo polymer PAZO was fabricated, and the kinetics of the photoinduced birefringence at 444 nm was measured. The results indicated an increase in the maximal induced birefringence for the layered structure in comparison to the non-doped azo polymer film.