A study of indium-incorporated copper selenide thin-film deposition on a glass substrate using the successive ionic adsorption and reaction method (SILAR) and the resulting properties is presented. The films were formed using these steps: selenization in the solution of diseleniumtetrathionate acid, treatment with copper(II/I) ions, incorporation of indium(III), and annealing in an inert nitrogen atmosphere. The elemental and phasal composition, as well as the morphological and optical properties of obtained films were determined. X-ray diffraction data showed a mixture of various compounds: Se, Cu0.87Se, In2Se3, and CuInSe2. The obtained films had a dendritic structure, agglomerated and not well-defined grains, and a film thickness of ~90 μm. The band gap values of copper selenide were 1.28–1.30 eV and increased after indium-incorporation and annealing. The optical properties of the formed films correspond to the optical properties of copper selenide and indium selenide semiconductors.
The composition and antibacterial properties of copper particles synthesized by a very simple reduction method were studied. For the preparation of particles in knitted fabrics, copper(II) sulfate was used as a precursor and ascorbic acid as a reducing natural agent. X-ray diffraction analysis showed the crystalline nature of the obtained particles. The round or oval particles and their agglomerates in knitted fabrics consisted of copper with traces of copper(I) oxide—cuprite. The element maps and energy dispersive X-ray spectra showed a high content of copper in the samples. The samples of wool and cotton knitted fabrics with copper particles had excellent antibacterial activity against gram-positive Staphylococcus aureus (S. aureus) and gram-negative Escherichia coli (E. coli) bacterial strains. The maximum zones of inhibition were 19.3 mm for S. aureus and 18.3 mm for E. coli using wool knitted fabric and 14.7 mm and 15.3 mm using cotton knitted fabric, respectively. The obtained results showed that the modified wool and cotton fabrics are suitable for use as inserts in reusable masks due to their noticeable and long-term activity against pathogenic bacteria.
Textile materials modified with copper-containing particles have antibacterial and antiviral properties that have prospects for use in healthcare. In the study, textile materials were saturated with copper-containing particles in their entire material volume by the absorption/diffusion method. The antibacterial properties of modified textile materials were confirmed by their inhibitory effect on Staphylococcus aureus, a Gram-positive bacterium that spreads predominantly through the respiratory tract. For the modification, ordinary textile materials of various origins and fiber structures were used. Technological conditions and compositions of modifying solutions were established, as well as the most suitable textile materials for modification. To assess the morphological and physical characteristics of copper-containing particles and the textile materials themselves, X-ray diffraction, a scanning electron microscope, and an energy-dispersive X-ray spectrum were used. In modified textile samples, XRD data showed the presence of crystalline phases of copper (Cu) and copper (I) oxide (Cu2O). On the grounds of the SEM/EDS analysis, the saturation of textile materials with copper-containing particles depends on the structure of the textile materials and the origins of the fibers included in their composition, as well as the modification conditions and the copper precursor.
The development of eco-friendly, cost-effective, and naturally abundant electrode materials for supercapacitors is gaining critical importance in current energy storage research. This study focuses on the synthesis of tin sulfide (SnSx) films via the eco-friendly successive ionic layer adsorption and reaction (SILAR) method, employing varying quantities of L-ascorbic acid (0.8 and 1.0 g) as a reducing agent. Tin sulfide films were deposited on fluorine-doped tin oxide (FTO) glass substrates and subsequently annealed in an inert atmosphere at temperatures ranging from 200 to 400 °C, resulting in thin films of varying thicknesses (100–420 nm). The structural and compositional characteristics of the films were thoroughly analyzed using Raman spectroscopy to confirm the purity and spectroscopic signatures of the sulfides. Further characterization was performed to assess the films’ morphology (scanning electron microscopy, SEM), phase composition (X-ray diffraction, XRD), surface chemical states (X-ray photoelectron spectroscopy, XPS), optical properties (UV–Vis spectroscopy), and electrical properties (Hall measurements). The gathered data were then used to evaluate the potential of tin sulfide films as electrode materials in supercapacitors, highlighting their suitability for sustainable energy storage applications.
About Me
Professor of the Department of Physical and Inorganic Chemistry, Faculty of Chemical Technology, Kaunas University of Technology
Professor of the Department of Physical and Inorganic Chemistry, Faculty of Chemical Technology, Kaunas University of Technology