Proton exchange membrane fuel cells (PEMFCs) are a promising clean energy technology due to their zero gas emissions, low operating temperature, and high efficiency. This review synthesizes research from 2015–2025 on (i) materials-level approaches (advanced/modified PFSA membranes and composite membranes) that improve water retention and ionic conduction, (ii) engineered gas diffusion layers and hydrophobic/hydrophilic gradients (including Janus and asymmetric GDL architectures) that facilitate directional water transport and have been shown to increase peak power density in some reports (e.g., from ≈1.17 to ≈1.89 W·cm−2 with Janus GDL designs), (iii) flow-field design strategies. This review examines the key aspects of water management in PEMFCs, including their impact on cell performance, the underlying causes of related issues, and the mechanisms of water transport within these cells. Additionally, it discusses the methods and materials used to enhance water management, highlighting recent advancements and potential directions for future research. Topics such as water transport, water flooding, and water control strategies in PEMFCs are also addressed. Both excess water (flooding) and water depletion (dehydration) can negatively influence fuel cell performance and lifespan. Particular attention is given to water dehydration, with a detailed discussion of its effects on the cathode, Anode, gas diffusion layer, catalyst layer, and flow channels.
Accurate modeling of proton exchange membrane fuel cells (PEMFCs) is essential for predicting system performance under diverse operating conditions. This study introduces a refined semi-empirical modeling that combines experimental validation with an enhanced parameter estimation method based on the Cloud Drift Optimization (CDO) algorithm. The approach focuses on identifying seven key parameters of the nonlinear PEMFC model by minimizing the difference between experimentally measured and simulated cell voltages. To assess its effectiveness, the proposed CDO-based estimator was compared with several established metaheuristic algorithms, including the particle swarm optimizer and the tetragonula carbonaria optimization algorithm. The evaluation was performed using three commercial PEMFC stacks rated at 250 W, 500 W, and the NedStack PS6, as well as experimental data obtained from the Renewable Energy Laboratory at A’Sharqiyah University. Results demonstrate that the CDO algorithm consistently produced the lowest sum of squared errors (SSE) of 1.0337 and exhibited stable convergence across multiple independent runs with a standard deviation of 1.2114 × 10−7. Its reliable performance under both normal and degraded conditions confirms the algorithm’s robustness and adaptability, establishing CDO as an efficient and dependable technique for PEMFC modeling and parameter identification.