Mohammed Musalem Aljufaili

Mr. Mohammed Musalem Aljufaili

Department of Electrical Engineering and Computer Science, College of Engineering, A'Sharqiyah University, Ibrā’, Shamāl ash Sharqīyah, Oman
orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 December 2025 in Electrochem
Verified
Journal Article
Open access
PDF file
MMMohamed Abd El-Hameed Mohamed
Mohamed Abd El-Hameed Mohamed
Mahmoud M. ElkholyMahmoud M. Elkholy
Mahmoud M. Elkholy
Mahfouz SaeedMahfouz Saeed
Mahfouz Saeed
AKAdnan Kabbani
Adnan Kabbani
IAIssa Ali Alhajri
Issa Ali Alhajri
Mohammed Musalem AljufailiMohammed Musalem Aljufaili
Mohammed Musalem Aljufaili
Accurate modeling of proton exchange membrane fuel cells (PEMFCs) is essential for predicting system performance under diverse operating conditions. This study introduces a refined semi-empirical modeling that combines experimental validation with an enhanced parameter estimation method based on the Cloud Drift Optimization (CDO) algorithm. The approach focuses on identifying seven key parameters of the nonlinear PEMFC model by minimizing the difference between experimentally measured and simulated cell voltages. To assess its effectiveness, the proposed CDO-based estimator was compared with several established metaheuristic algorithms, including the particle swarm optimizer and the tetragonula carbonaria optimization algorithm. The evaluation was performed using three commercial PEMFC stacks rated at 250 W, 500 W, and the NedStack PS6, as well as experimental data obtained from the Renewable Energy Laboratory at A’Sharqiyah University. Results demonstrate that the CDO algorithm consistently produced the lowest sum of squared errors (SSE) of 1.0337 and exhibited stable convergence across multiple independent runs with a standard deviation of 1.2114 × 10−7. Its reliable performance under both normal and degraded conditions confirms the algorithm’s robustness and adaptability, establishing CDO as an efficient and dependable technique for PEMFC modeling and parameter identification.

29 October 2026 in Applied System Innovation
Verified
Journal Article
Open access
PDF file
Mahmoud M. ElkholyMahmoud M. Elkholy
Mahmoud M. Elkholy
Ahmed El-Sayed MetwallyAhmed El-Sayed Metwally
Ahmed El-Sayed Metwally
HAHossam Ashraf
Hossam Ashraf
Mohammed Musalem AljufailiMohammed Musalem Aljufaili
Mohammed Musalem Aljufaili
MMMohamed Abdelateef Mostafa
Mohamed Abdelateef Mostafa
This paper presents an energy-efficient operating strategy for a three-phase induction motor drive powered by a proton exchange membrane fuel cell (PEMFC). The proposed approach minimizes hydrogen consumption and improves motor efficiency over a wide operating range by continuously regulating the motor terminal voltage according to the load demand. The optimal reference voltage corresponding to each load torque is determined using the dholes-inspired optimization algorithm (DIOA), a recent swarm-based optimization technique. The DIOA is also employed to determine the optimal parameters of a proportional–integral (PI) controller, enabling accurate and rapid tracking of the reference voltage. To evaluate the effectiveness of the proposed optimizer, its performance is compared with the well-known particle swarm optimization (PSO) algorithm. The reference voltages obtained using the DIOA and PSO differ by less than 1.1%, their hydrogen consumptions differ by less than 0.02%, and a direct voltage sweep confirms the optimum. The dynamic performance is investigated using both an optimally tuned PI controller and a neural network controller (NNC). Simulation results show that the NNC provides faster settling, lower transient deviations, and improved dynamic performance compared with the PI controller. Steady-state results indicate that hydrogen savings are strongly dependent on motor loading. At a load torque of 0.5 N·m (5% of full load), hydrogen consumption is reduced from 1.999121 slpm to 0.706726 slpm, representing a saving of 64.65%. At a load torque of 2 N·m (20% of full load), the hydrogen saving reaches 24.17%. As the load approaches its rated value, the motor operates near its maximum efficiency and rated voltage.