Ammonia, a chemical that contains high hydrogen quantities, has been presented as a candidate for the production of clean power generation and aerospace propulsion. Although ammonia can deliver more hydrogen per unit volume than liquid hydrogen itself, the use of ammonia in combustion systems comes with the detrimental production of nitrogen oxides, which are emissions that have up to 300 times the greenhouse potential of carbon dioxide. This factor, combined with the lower energy density of ammonia, makes new studies crucial to enable the use of the molecule through methods that reduce emissions whilst ensuring that enough power is produced to support high-energy intensive applications. Thus, this paper presents a numerical study based on the use of novel reaction models employed to characterize ammonia combustion systems. The models are used to obtain Reynolds Averaged Navier-Stokes (RANS) simulations via Star-CCM+ with complex chemistry of a 70%–30% (mol) ammonia–hydrogen blend that is currently under investigations elsewhere. A fixed equivalence ratio (1.2), medium swirl (0.8), and confined conditions are employed to determine the flame and species propagation at various operating atmospheres and temperature inlet values. The study is then expanded to high inlet temperatures, high pressures, and high flowrates at different confinement boundary conditions. The results denote how the production of NOx emissions remains stable and under 400 ppm, whilst higher concentrations of both hydrogen and unreacted ammonia are found in the flue gases under high power conditions. The reduction of heat losses (thus higher temperature boundary conditions) has a crucial impact on further destruction of ammonia post-flame, with a raise in hydrogen, water, and nitrogen through the system, thus presenting an opportunity of combustion efficiency improvement of this blend by reducing heat losses. Final discussions are presented as a method to raise power whilst employing ammonia for gas turbine systems.
When developing a gait cycle on a low-friction surface, a biped robot eventually tends to slip. In general, it is common to overcome this problem by means of either slow movements or physical adaptations of the robot at the contact point with the walking surface in order to increase the frictional characteristics. In the case of slipping, several types of sensors have been used to identify the relative displacement at the contact point of the supporting leg with the walking surface for control purposes. This work is focused on the experimental implementation of a low-cost force sensor as a measurement system of the slipping phenomenon. It is shown how, supported on a suitable change of coordinates, the force measurement at the contact point is used to obtain the total displacement at the supporting point due to the low-friction conditions. This is an important issue when an accurate Cartesian task is required
In this paper, a conceptual design of a Delta robot is developed by means of a mechatronic design methodology. A fully integrated conceptual design, clarifying the recurrence of the conceptual design process using black-box/white-box analysis, is presented using the Model Based Systems Engineering (MBSE) paradigm and the SysML language as the formal modeling tool. Multiple designs proposals are then evaluated by the non-linear Choquet integral in order to choose the most appropriate according to a multicriteria requirement. For a preliminary conceptual design, structural parameters for the Delta robot are determined by defining and solving a nonlinear constrained optimization problem, which considers the kinematic model of the robot maximizing its workspace. Both the decision making and the optimization problem are integrated and automated into a common software framework for the design process, by using a standard genetic algorithm and Monte Carlo method to set the optimized conceptual design to be rendered in Computer Aided Design (CAD) software and in a physical prototype, satisfying the technical specifications.
In this article, a formal mechatronic design of a biped robot is addressed. It is considered a model-based system engineering methodology since the continuous updating of information, from analysis and evolution of conceptual designs, demands a large volume of data. The definition of a biped robot comes from the need of a system to perform human-like walking as the problem to be solved. A specific robot configuration results from the analysis of conceptual solutions throughout SysML as the language for modeling the synergistic and automatic integration among engineering disciplines. The general design process is developed according to the well-known V-model for mechatronic systems design; however, a three-dimensional focus is proposed in order to address a variety of domains and their interaction along the design process. The detailed study of the solution is evaluated in order to optimize the joint torques and limbs shape from an anthropometric robot to achieve effective human-like motion. Although the mechatronic design is done for the overall biped robot system, this work is particularly focused on mechanical features as the most representative subsystem that incorporates genetic algorithm optimization based on a numerical Newton–Euler model merged with topology optimization tools to define final geometry of limbs with stiffness maximization.
7 April 2015 in Mathematical Problems in Engineering
This work deals with the analysis of the consensus problem for networks of agents constituted by single and double integrator systems. It is assumed that the communication among agents is affected by a constant time-delay. Previous and numerous analysis of the problem shows that the maximum communication time-delay that can be introduced to the network without affecting the consensus of the group of the agents depends on the considered topology. In this work, a control scheme that is based on the estimation of future states of the agents and that allows increasing the magnitude of a possible time-delay affecting the communication channels is proposed. How the proposed delay compensation strategy is independent of the network topology in the sense that the maximum allowable time-delay that could be supported by the network depends on a design parameter and not on the maximum eigenvalue of the corresponding Laplacian matrix is shown. It is formally proven that, under the proposed prediction scheme, the consensus of the group can be achieved by improving the maximum time-delay bounds previously reported in the literature. Numerical simulations show the effectiveness of the proposed solution.