The use of Ground Source Heat Pumps (GSHPs) has grown exponentially around the world over recent decades. The GSHP represents an alternative device to electric heating systems and oil boilers. Additionally, it requires a lower power consumption and less maintenance than combustion-based heating systems. Moreover, the CO emissions produced by a GSHP are lower than other systems based on burning oil, gas, or biomass. However, the main obstacle for the widespread use of GSHPs is the high cost of Ground Heat Exchanger (GHE) installation, a technology that exhibits low thermodynamic efficiencies. Over the past decade, some studies have been conducted to improve heat transfer in GHE pipes using traditional working fluids, creating new pipe materials or designing new heat exchanger configurations. The main contribution of this paper is a summarization of the outcomes of theoretical, numerical and experimental studies to improve heat transfer in GHEs using nanotechnology. Additionally, the development of new fluids (nanofluids) and new materials (nanoparticles and nanocomposites) applied to heat exchanger pipes and the designs and configurations of GHEs are highlighted. As a result, the present review provides a perspective for future research regarding the use of nanotechnology to reduce the costs involved in GHE for GSHP improvement.
In this paper, a conceptual design of a Delta robot is developed by means of a mechatronic design methodology. A fully integrated conceptual design, clarifying the recurrence of the conceptual design process using black-box/white-box analysis, is presented using the Model Based Systems Engineering (MBSE) paradigm and the SysML language as the formal modeling tool. Multiple designs proposals are then evaluated by the non-linear Choquet integral in order to choose the most appropriate according to a multicriteria requirement. For a preliminary conceptual design, structural parameters for the Delta robot are determined by defining and solving a nonlinear constrained optimization problem, which considers the kinematic model of the robot maximizing its workspace. Both the decision making and the optimization problem are integrated and automated into a common software framework for the design process, by using a standard genetic algorithm and Monte Carlo method to set the optimized conceptual design to be rendered in Computer Aided Design (CAD) software and in a physical prototype, satisfying the technical specifications.
1 January 2015 in Mathematical Problems in Engineering
An optimization based approach for the regulation of excessive or insufficient forces at the end-effector level is introduced. The objective is to minimize the interaction force error at the robot end effector, while constraining undesired interaction forces. To that end, a dynamic optimization problem (DOP) is formulated considering a dynamic robot impedance model. Penalty functions are considered in the DOP to handle the constraints on the interaction force. The optimization problem is online solved through the gradient flow approach. Convergence properties are presented and the stability is drawn when the force limits are considered in the analysis. The effectiveness of our proposal is validated via experimental results for a robotic grasping task.
In this article, a formal mechatronic design of a biped robot is addressed. It is considered a model-based system engineering methodology since the continuous updating of information, from analysis and evolution of conceptual designs, demands a large volume of data. The definition of a biped robot comes from the need of a system to perform human-like walking as the problem to be solved. A specific robot configuration results from the analysis of conceptual solutions throughout SysML as the language for modeling the synergistic and automatic integration among engineering disciplines. The general design process is developed according to the well-known V-model for mechatronic systems design; however, a three-dimensional focus is proposed in order to address a variety of domains and their interaction along the design process. The detailed study of the solution is evaluated in order to optimize the joint torques and limbs shape from an anthropometric robot to achieve effective human-like motion. Although the mechatronic design is done for the overall biped robot system, this work is particularly focused on mechanical features as the most representative subsystem that incorporates genetic algorithm optimization based on a numerical Newton–Euler model merged with topology optimization tools to define final geometry of limbs with stiffness maximization.
20 September 2018 in Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería
This work presents a simpler numerical design method for efficiency maximization of an Hydraulic Jet Pump (HJP) for oil-well extraction process, considering its hydraulic and geometric parameters. The design process consists in setting and solving a constrained non-linear optimization problem by taking into account the hydraulic model of the HJP in terms four design variables: throat area, nozzle area, injection flow, and injection pressure to the oil-well. The objective function of this case aims to maximize the HJP's efficiency avoiding to approach cavitation condition as well fulfilling technical constraints. A numerical technique, Differential Evolution Algorithm (DEA), has been implemented to solve the optimization problem. The proposed methodology leads to a solution set by considering only commercial geometries and feasible operating conditions for the HJP, which facilitates its practical implementation. A set of ten oil-wells with land production data, operating in the southeaster of Mexico, is used to compare and validate several Jet pump designs, i. e., through comparison with actual oil-well's operation condition.