Jiamin Huang

Ms. Jiamin Huang

South China University of Technology, Guangzhou, Guangdong, China
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 July 2022 in Photonics
Verified
Journal Article
Open access
PDF file
WJWanpeng Jiang
Wanpeng Jiang
CYchangsheng yang
changsheng yang
QZQilai Zhao
Qilai Zhao
QGQuan Gu
Quan Gu
JHJiamin Huang
Jiamin Huang
SXShanhui Xu
Shanhui Xu
Based on hybrid wavelength pumping and tapered Yb-doped fibers (T-YDFs), a 650 W all-fiber single-frequency polarization-maintaining fiber amplifier was demonstrated experimentally at 1030 nm. Different pump power ratios in the T-YDF-based power-amplifier stage were proposed to investigate their influence on the transverse mode instability (TMI) effect. The highest TMI threshold was obtained when the pump power ratio of 940 nm to 976 nm was 1:4.4. A measured M2 factor of 1.7 and a polarization extinction ratio of 14 dB at the maximum output power were obtained. To the best of our knowledge, these results exhibit the highest output power of any all-fiber single-frequency polarization-maintaining fiber amplifiers created up to now.

4 June 2022 in Photonics
Verified
Journal Article
Open access
PDF file
JHJiamin Huang
Jiamin Huang
QZQilai Zhao
Qilai Zhao
JZJunjie Zheng
Junjie Zheng
CHChengzi Huang
Chengzi Huang
QGQuan Gu
Quan Gu
SXShanhui Xu
Shanhui Xu
A 1560 nm high-power linearly-polarized all-fiber single-frequency narrow-linewidth laser with near diffraction-limited beam quality is demonstrated. The Yb–Er energy transfer efficiency and the ability of the signal laser to capture pump light have been improved by specifically choosing the pumping wavelength and the input signal power in the final power amplifier stage of this laser system. Under the off-peak absorption pumping wavelength of 940 nm, along with the maximum input signal power of 6 W, a maximum output power of 102 W with a slope efficiency of 40.5% is acquired. At the highest output power status, a polarization extinction ratio (PER) of 15.5 dB, a linewidth of 3.05 kHz, and a beam quality of Mx2 = 1.14, My2 = 1.06 are obtained, respectively. This advanced single-frequency fiber laser has great potential for the long-range coherent Doppler lidar and the next generation of gravitational wave detection.

23 September 2022
Verified
Conference Paper
Closed access
WSWanhao Sun
Wanhao Sun
JHJiamin Huang
Jiamin Huang
In order to realize the verification of the standard platinum resistance thermometer in the temperature zone from 0°C to 419.527°C and the calculation of the reference table, a system for the verification data processing of the standard platinum resistance thermometer and the automatic generation of any reference table was developed based on PyQt5. The system includes three parts: the standard platinum resistance information input interface, the verification result output interface, and the automatic generation interface of the reference table. After the calculation is completed, the Excel format verification report can be automatically generated. The experimental results are compared with the reference function table data in the temperature zone from 0°C to 419.527°C in the verification regulations, and the results meet the requirement that the difference between the two calculation results is less than $1\times 10^{-8}$ , which proves the reliability of the calculation results of the system. Compared with the traditional calculation relying on Excel table, the verification operation of this system is clearer. The division value and final temperature of the platinum resistance thermometer scale can be customized to verify, and the design interface is friendly and the operation is simple, which greatly improves the working efficiency of the metrology personnel for the verification. This method can be used for the verification of first-class and second-class standard platinum resistance.