Jacek Stanisz

Dr. Jacek Stanisz

Mineral and Energy Economy Research Institute of the Polish Academy of Sciences, Kraków, Małopolskie, Poland
orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 November 2017 in E3S Web of Conferences
Verified
Conference Paper
Open access
PDF file
JSJacek Stanisz
Jacek Stanisz
ABAleksandra Borecka
Aleksandra Borecka
ZPZenon Pilecki
Zenon Pilecki
RKRobert Kaczmarczyk
Robert Kaczmarczyk
The article discusses the potential for using numerical simulation to assess the development of deformation and pore pressure changes in a levee as a result of the increase and decrease of the flood wave. The simulation made in FLAC 2D did not take into account the filter-erosion deformation associated with seepage in the levee. The simulations were carried out for a field experimental storage consisting of two combined levees, which was constructed with the help of homogeneous cohesive materials with different filtration coefficients. Calculated and measured pore pressure changes were analysed at 4 monitoring points. The water level was increased to 4 m in 96 hours and decreased in 120 hours. The characteristics of the calculated and measured pore pressure changes over time were similar. The maximum values of the calculated and measured pore pressure were almost identical. The only differences were the greater delay of the experimental levee response to changes in water level increase compared to the response of the numerical model. These differences were probably related to filtering-erosion effects during seepage in the levee.

20 April 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
AGAndrzej Gruchot
Andrzej Gruchot
TZTymoteusz Zydroń
Tymoteusz Zydroń
Andrzej WalegaAndrzej Walega
Andrzej Walega
JPJana Pařílková
Jana Pařílková
JSJacek Stanisz
Jacek Stanisz
This paper presents the results of laboratory tests that allowed us to determine the effect of the soil surface inclination and its initial moisture content on the formation of overland and subsurface runoff. The experiments were carried out for the soil that is commonly present in the southern part of Poland, including the Outer Carpathians. The results of these measurements served as a reference for overland runoff calculations using the Richards model, simplified Green–Ampt model, and the empirical model (MSME). The results of the measurements showed that, for low-permeable soil, overland runoff is the dominant form. It was shown that a slope in the range of 2.5–5.0% does not have a significant effect on the amount of overland runoff, but affects its dynamics. The measurements also showed that the starting time and amount of overland runoff are strictly associated with the initial soil moisture content. High soil moisture content in the period preceding the onset of rainfall causes faster generation and an increase in overland runoff, which is caused by the saturation of the surface layer of the soil. This mechanism was confirmed by the results of calculations using the Richards model and measurements of the electrical resistance of the soil. Theoretical calculations showed that the results of the runoff calculations using the Richards and Green–Ampt models are strongly dependent on the hydraulic properties of the soil adopted for the analysis. It was also demonstrated that the modified MSME model satisfactorily estimates the amount of overland and subsurface runoff, but requires parameter calibration based on existing hydrological data.

29 July 2021 in Energies
Verified
Journal Article
Open access
PDF file
EPElżbieta Pilecka
Elżbieta Pilecka
JSJacek Stanisz
Jacek Stanisz
RKRobert Kaczmarczyk
Robert Kaczmarczyk
AGAndrzej Gruchot
Andrzej Gruchot
The slopes of open-pit mines are often at risk of failure. To identify this hazard, stability analyses are performed. An important element of these stability analyses is the reliable selection of input parameter values for the calculations. This selection is difficult because the slopes of the open pit are disturbed by mining activities. In such conditions, rheological processes, intensified by weathering, develop in open-pit slopes. This study is aimed at setting the strength parameters for the stability analysis of open-pit slopes with a developed slide process, using the random set method. The study was performed on the example of the open pit of the Bełchatów lignite mine, central Poland. A four-stage methodology, according to the random set method, was proposed. The methodology covered the following: site investigation, sensitivity analyses, shear strength reduction (SSR) analyses using numerical calculations, and probability analyses of the factor of safety (FoS) calculation results. The setting of the input parameters took into account the peak and residual strength parameters for each lithological unit in the physical model of the open-pit slope. Samples for laboratory tests were taken from the cores of nine test boreholes. The sensitivity analysis included all peak and residual strength parameters for each lithological unit in the body. As a result of the sensitivity analysis, specific strength parameters were adopted that would have a great impact upon the results of the calculations. Selected sets of parameter values were then used for the FoS calculations. The resultant FoS values revealed the probable slide planes. The positions of the slide planes were consistent with the interpreted slide surfaces based on the control boreholes and terrain observations. Knowledge of the slide planes positions and the values of the strength parameters enabled the designing of a securing approach for this landslide, and the taking of preventive measures to reduce this risk.

27 July 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
EPElżbieta Pilecka
Elżbieta Pilecka
DSDariusz Szwarkowski
Dariusz Szwarkowski
JSJacek Stanisz
Jacek Stanisz
MBMarcin Blockus
Marcin Blockus
In this study, we present an analysis of the causes of a landslide along a railway track in the Polish Lowlands. The landslide damaged the railway track and caused significant material losses. Digital models of the terrain surface before and after the landslide were elaborated. Remote sensing using LIDAR aerial technique and a terrestrial laser scanner was performed to determine the morphology. Soil mass behaviour was analysed by 3D numerical simulation. A numerical model was created based on geotechnical tests. Taking into account the behaviour of the dry and wet models, the numerical simulation showed the most probable scenario of mass movement. The main reasons for the landslide were rainwater infiltration in the track basement and the unfavourable morphology of the area on which the railway embankment was located. The study demonstrates that combined methods—laser scanning, geotechnical testing of the soil material, and 3-dimensional numerical simulation—enabled the assessment of the causes of the analysed landslide.

26 November 2018
Verified
Conference Paper
Open access
JSJacek Stanisz
Jacek Stanisz
ZPZenon Pilecki
Zenon Pilecki
In this study, we present the preliminary results of deep profiling of pore pressure in the near surface formations of the Carpathian flysch, on the Tęgoborze-Just landslide near Nowy Sącz in Southern Poland. The aim of the study is to identify zones with significant changes in pore pressure influenced landslide processes. These pore pressure changes correspond to a greater change in the degree of saturation or water flow paths. Profiling was performed in four series using a CPTU static probe with a NOVA Acoustic cone. The measurement of pore pressure in flysch formations is very complicated due to the strong heterogeneity of the medium properties and variable water conditions, which are strongly influenced by the intensity of precipitation. The tests were carried out in a colluvium to a depth of approx. 5.0 m, i.e. to the border of a less weathered bedrock, under varying water conditions. The results obtained indicate the presence of four zones of significant changes in pore pressure. The location of these zone is consistent with the location of the greater displacement measured with the inclinometer. There is a greater probability that these weak zones may form a rupture surface.

1 January 2013 in Geotourism/Geoturystyka
Verified
Journal Article
Open access
PDF file
JSJacek Stanisz
Jacek Stanisz
AZAnna Ziobro
Anna Ziobro
Arkose sandstone – a forgotten treasure of Kwaczała