In this study, the primary breakup of a high-speed diesel jet is investigated using a CFD methodology that combines an LES model with a VOF technique for free surface capture. Inner-nozzle turbulence and cavitation are simplified as the sinusoidal radial velocity with a given amplitude and frequency. The ligament and droplet formation process are captured, the liquid jet is disturbed by the radial velocity, and umbrella-shaped crests are created. Meanwhile, ligaments are formed from the edges of crests because of shear stress and surface tension. We investigate the effect on the characteristics of the surface wave and the liquid structure of different disturbance frequencies and amplitudes. The variation in the disturbance amplitude and frequency facilitates the formation of a variety of liquid structures, such as waves, upstream/downstream-directed bells, and droplet chains. Increasing the disturbance frequency reduces the growth rate of the surface waves of the liquid jet. With an increase in disturbance amplitude, the amplitude of surface waves evidently increases. Furthermore, as the disturbance frequency and amplitude increase, the thickness and Weber number of the radial liquid sheet decrease, and this causes the ligament diameter of the primary breakup to become small. Finally, the primary breakup time is investigated, and the time scale of the liquid jet primary breakup decreases as the disturbance amplitude increases, which indicates that an increase in the disturbance amplitude promotes the atomization of a disturbed liquid jet.
21 November 2018 in Journal of Vibration Engineering & Technologies
The fuel injector is a critical component of the internal combustion engine. The diameters of the injector nozzle and the control chamber’s oil inlet and outlet are generally between 0.2 and 0.5 mm, which are typical microchannel structures. During high-pressure injection, the cavitation phenomenon in the channel seriously affects the reliability of the internal combustion engine. The choice of turbulence and cavitation models is the key to investigate the cavitation in the microchannel by using numerical methods. Based on the Winklhofer microchannel fuel experiment, five representative turbulence models were used to construct a microchannel model, and the results were compared and analyzed with the experiment. The results show that the pressure gradient values obtained from the combination of RNG k-ε and ZGB models were similar to the experimental data, with an error of less than 6%. The cavitation distribution calculated from the combination of LES and ZGB models was most consistent with the experimental observation data. The outlet mass flow rate obtained from the LES and ZGB models matched the trend of the experimental data in the pressure difference range of 19 bar to 85 bar, with an error of less than 2%. For the cross-sectional flow rate calculation, the RNG k-ε and ZGB models had the smallest calculation errors, with errors below 11%.
A novel quasi-zero stiffness nonlinear magnetic isolator is designed by using magnetic springs in parallel with linear positive stiffness spring. Through the static analysis, the mathematical expressions of force-displacement-current and stiffness-displacement-current of the system are established, and the necessary conditions for the normal function and geometric parameters of the system are obtained. The nonlinear dynamic equations of the system under external excitation force are established. The amplitude and frequency characteristics of the system are deduced by harmonic balance method. The influence of system parameters and external excitation amplitude on the dynamic characteristics of the system is analyzed. Results showed that the vibration of the system can be controlled by controlling the electromagnet current or increasing the damping coefficient while the external excitation amplitude is kept in a certain of range. The researches provided a theoretical guidance for the design and application of the new quasi-zero stiffness nonlinear magnetic isolation system.
Embedded liquid cooling is a preferred solution for dissipating the heat generated by high-power chips. The cooling capacity and pump power consumption of embedded liquid cooling heat sinks differ significantly between different structures. To achieve an accurate match between cooling capacity and heat dissipation requirements, the selection of a liquid-cooled heat sink should be carefully considered in conjunction with the heat dissipation needs of heat sources in real-world thermal management issues. Based on the manufacturing limitations on chip temperature and microchannel pressure, a composite performance index function was developed to assess the cooling capacity and cooling cost of the heat sink. This allowed for the establishment of an evaluation standard to determine the suitability of embedded liquid cooling and heat sink for the heat source. In this study, the suitability of four microchannel heat sinks with the same feature length and fin volume was evaluated under various thermal load conditions. The results show that the best-suited heat sink changes with variations in the thermal load of the chip. In the example, when the heat source was homogeneous at 100 W, the circular section pin fins have an optimal suitability of 0.928 for Re = 500. When the heat source was a heterogeneous heat source with a power of 100 W, the value of Θ was found to be 0.389. Additionally, the optimal suitability of drop section pin fins for Re = 971.5 was determined to be 0.862.
The leakage of the ship’s pipeline system will bring great risks to the engine equipment and seriously threaten the vitality of the ship. In this paper, the pipeline leakage detection and localization research are carried out based on the vibration signal generated by pipeline leakage. First, the finite element model of the pipeline is constructed to obtain the variation law of the vibration signal when the pipeline leaks are carried out. Second, the vibration signal is processed based on the variational mode decomposition (VMD) and radial basis function (RBF) neural networks. The wavelet packet threshold noise reduction is conducted before signal decomposition to improve the signal-to-noise ratio. Then, the denoised signal is decomposed by VMD. The effective component is identified by analyzing the correlation coefficient between the component and the denoised signal. The center frequency and energy of the effective component are used as feature vector to train the RBF neural network to identify and locate leakage. Finally, a pipeline leakage test platform is built under laboratory conditions. After processing the data samples collected from the test, the RBF neural network is trained to identify and locate leaks. The test sample identification results show that the leak identification and localization method based on VMD-RBF has a high accuracy.