In the framework of the wind energy network for distributed generation in urban environments for most South American countries, wind resource assessment studies have been carried out in activities to establish a suitable methodology to assess the wind potential in urban environments. Some methodologies are already published in research studies, and the wind tunnel is the most accurate solution to obtain insight into the wind resource when measurements are unavailable, which is the most frequent case. Nevertheless, besides its validity, one cannot disregard the high cost of producing a scaled urban model and access to a wind tunnel. In this sense, this paper compares results from a wind tunnel experiment and different numerical modeling approaches. Two commercial models (WindSim and Wasp Engineering) and one open-source CFD code (OpenFOAM) are used. The results from the modeling simulation concluded that CFD models could achieve lower deviations for the mean wind speed and turbulence intensity when compared with non-CFD models. With such results, CFD modeling is a promising tool for reliably evaluating wind potential in urban environments.
In this work is presented a statistical description of wind profile in the first 100 m of height of the Planetary Boundary Layer, taking account the measurements in the tower Colonia Eulacio Uruguay. This tower has high vertical resolution of wind velocity measurements, form 10.1 m to 101.8 m. Thermometer are installed in 3.4 m and 100.8 m, also the tower is equipped with wind vane and pyranometer. We present the diurnal cycle of mean wind, intensity of turbulence in dependence of height, also standard deviation of direction is described as a measure of turbulence in wind. Stability state is computed with vertical gradient of temperature. Before sunrise (unstable condition) is seen a decrease in mean velocity of top levels (81.8 m and 101.8 m) and increase in lower levels (10.1 m and 25.7 m). Higher dispersion in dT/dz can be seen during night time (stable condition), superadiabatic values -0.02 ◦C/m can be seen during daytime with slow dispersion. Intensity of turbulence decrease with height, for all stability conditions, is seen a increase in intensity of turbulence for unstable condition.
This chapter discusses feasibility of the use of wind energy generation at sewage plants in Montevideo city. Due to environmental concerns, the Montevideo City authorities funded a feasibility study of the use of wind turbines in several sewage works. The generators, 150 kW or more each one, will be connected to the grid. The study began with the assessment of wind resource at each site, using the wind data series available at meteorological stations adjusted to the exposure parameters related to the kind of soil upstream in the different directions. The hourly power demand of the plants was modeled and forecast for the next fifteen years. The visual and acoustic impacts of the wind turbines are considered. Different wind turbine arrays were selected to supply the energy needed in each plant. The feasibility study is done assuming two possibilities: the excess wind energy is either sold to the utility or not. The results in Punta Brava site are shown. Finally, this chapter concludes that city authorities decided to install wind turbines at Punta Brava driven by economic convenience and the promotion of a clean source of energy in a country where the wind resource is abundant.
Extreme weather events, like storms and tornadoes, are becoming more frequent due to climate change, resulting in wind gusts over 150 km/h in South America's waterfront areas. These conditions threaten lives and urban heritage. For decades, high-rise developments in these locations have followed similar design patterns, obstructing or channeling wind flow in outdoor spaces. This built environment poses challenges for climate-sensitive urban design. To address these issues, it is essential to understand how different urban layouts affect wind performance. This study aims to evaluate the wind performance of urban design morphology in the waterfront of Viña del Mar, a prominent tourist city on South America's Pacific coast. Two geometric arrangements are analyzed: a new circular and a traditional linear. Both designs have heights of up to 25 floors and use the same construction materials. The method involves modeling wind performance using Computational Fluid Dynamics (CFD) during two sample periods: summer (December) and winter (June). The data was extrapolated from a weather station in Viña del Mar to the Con-Con site. According to the wind rose data, the main wind directions for analysis are North-West and South-East. The results connect theoretical wind performance around buildings and the modeling outcomes, highlighting phenomena such as Venturi effects, vortex formation, and wind shadow lengths. Findings reveal that the permeability of urban facades varies between the two layouts. Increasing the distance between buildings reduces the length of wind shadows in linear arrangements. Conversely, circular building arrangements lead to higher wind speeds in outdoor areas facing the windward side.