José Ricardo Monteiro Barbosa

Mr. José Ricardo Monteiro Barbosa

Chemical Engineering, Faculty of Engineering, University of Porto, Porto, Portugal

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 April 2025 in Materials
Verified
Journal Article
Open access
PDF file
FCFilipa Costa
Filipa Costa
DMDaniel Mendanha
Daniel Mendanha
JGJoana Gomes
Joana Gomes
JOJuliana Oliveira
Juliana Oliveira
CRCecília Ribeiro
Cecília Ribeiro
CSCarla Joana dos Santos Joana Marinho da Silva
Carla Joana dos Santos Joana Marinho da Silva
The rapid growth of the global population has led to significant environmental impacts, driven by the unsustainable extraction of resources and waste generation. To address these challenges, the valorisation of by-products from different industries is crucial for maximising resource efficiency, reducing waste, and promoting sustainable practices. In this study, a comprehensive characterisation of the physicochemical properties of plant-based by-products, including rice husk (RH), oregano stalks (OS), eucalyptus leaves (EL), and almond shells (AS), was conducted. The analyses of the residues showed that, despite the similarities regarding cellulose and lignin content in all materials, RH and OS present a higher cellulose content, while EL and AS contain a greater percentage of oils. Additionally, calcium and potassium were identified as the metals at higher concentrations in all residues. The EL and RH present significant hydrophobic properties compared to the other analysed residues, showcased by their lower wettability. The morphological analyses of the waste residues revealed that OS and RH particles exhibit fibrous characteristics with heterogeneous sizes, while EL is a blend of fibrous and amorphous particles, and AS is composed of smaller particles with irregular shapes. All the residues retained their antioxidant properties over a 12-month storage period, with no degradation due to grinding. The composition and physicochemical properties of these residues highlight their potential to be used in distinct industries, including construction, transport, and textiles, promoting a circular economy and supporting a more sustainable environment.

22 March 2022 in C
Verified
Journal Article
Open access
PDF file
João Manuel Cunha Bessa da CostaJoão Manuel Cunha Bessa da Costa
João Manuel Cunha Bessa da Costa
José Ricardo Monteiro BarbosaJosé Ricardo Monteiro Barbosa
José Ricardo Monteiro Barbosa
Joao RestivoJoao Restivo
Joao Restivo
Carla OrgeCarla Orge
Carla Orge
ANAnabela Nogueira
Anabela Nogueira
Olívia Salomé G. P. SoaresOlívia Salomé G. P. Soares
Olívia Salomé G. P. Soares
Recent works in the development of nanostructured catalysts for bromate reduction in drinking water under hydrogen have highlighted the importance of the properties of the metallic phase support in their overall performance. Since most works in catalyst development are carried out in powder form, there is an overlooked gap in the correlation between catalyst support properties and performance in typical continuous applications such as fixed bed reactors. In this work, it is shown that the mechanical modification of commercially available carbon nanotubes, one of the most promising supports, can significantly enhance the activity of the catalytic system when tested in a stirred tank reactor, but upon transition to a fixed bed reactor, the formation of preferential pathways for the liquid flow and high pressure drops were observed. This effect could be minimized by the addition of an inert filler to increase the bed porosity; however, the improvement in catalytic performance when compared with the as-received support material was not retained. The operation of the continuous catalytic system was then optimized using a 1 wt.% Pd catalyst supported on the as-received carbon nanotubes. Effluent and hydrogen flow rates as well as catalyst loadings were systematically optimized to find an efficient set of parameters for the operation of the system, regarding its catalytic performance, capacity to treat large effluent flows, and minimization of catalyst and hydrogen requirements. Experiments carried out in the presence of distilled water as a reaction medium demonstrate that bromate can be efficiently removed from the liquid phase, whereas when using a real water matrix, a tendency for the deactivation of the catalyst over time was more apparent throughout 200 flow passages over the catalytic bed, which was mostly attributed to the competitive adsorption of inorganic matter on the catalyst active centers, or the formation of mineral deposits blocking access to the catalyst.

29 November 2021 in Physica Status Solidi (a)
Verified
Journal Article
Closed access
PDF file
ASAna R. Sousa
Ana R. Sousa
RMRenata Matos
Renata Matos
José Ricardo Monteiro BarbosaJosé Ricardo Monteiro Barbosa
José Ricardo Monteiro Barbosa
JFJoão Ferreira
João Ferreira
GSGilda Santos
Gilda Santos
APAndré M. Pereira
André M. Pereira

14 November 2024 in Journal of Environmental Chemical Engineering
Verified
Journal Article
Open access
DPDiógenes Honorato Piva
Diógenes Honorato Piva
José Ricardo Monteiro BarbosaJosé Ricardo Monteiro Barbosa
José Ricardo Monteiro Barbosa
IOIsabel Oliveira
Isabel Oliveira
JSJuliana Sousa
Juliana Sousa
JRJoão Restivo
João Restivo
Olívia Salomé G. P. SoaresOlívia Salomé G. P. Soares
Olívia Salomé G. P. Soares

24 February 2022 in Processes
Verified
Journal Article
Open access
PDF file
José Ricardo Monteiro BarbosaJosé Ricardo Monteiro Barbosa
José Ricardo Monteiro Barbosa
JSJuliana P.S. Sousa
Juliana P.S. Sousa
Joao RestivoJoao Restivo
Joao Restivo
Manuel Fernando PereiraManuel Fernando Pereira
Manuel Fernando Pereira
Olívia Salomé G. P. SoaresOlívia Salomé G. P. Soares
Olívia Salomé G. P. Soares
The remediation of bromate in water is a concern due to the reported health issues caused by its ingestion. Catalytic processes, wherein bromate is reduced to non-hazardous bromide, have been studied. In the present work, catalysts of 1% palladium supported in electrospun carbon fibers (Pd-CFs) using different methods for palladium incorporation were prepared. The textural properties, morphology, crystalline structure, and hydrogenation capacity by H2 chemisorption analysis of the Pd-CFs catalysts were characterized. The catalytic tests were performed in a semi-batch reactor, and the obtained results showed different catalytic activity by each prepared Pd-CFs catalyst. The catalysts prepared by incipient wetness impregnation—1% Pd/CF1 and 1% Pd/CF2, using CFs obtained with electrospinning flow rates of 0.5 mL h−1 and 2 mL h−1, respectively—achieved total bromate reduction after 120 min of operation; however, 1% Pd/CF1 obtained total reduction as early as 30 min. Taking into account the catalyst properties, 1% Pd/CF1 showed a good catalytic activity due to CFs morphology obtained using a low electrospinning flow rate, while the Pd incorporation method allowed a high availability of active sites with hydrogenation properties for bromate reduction.

12 December 2022 in Environmental Technology
Verified
Journal Article
Open access
José Ricardo Monteiro BarbosaJosé Ricardo Monteiro Barbosa
José Ricardo Monteiro Barbosa
ASA. Sofia G.G. Santos
A. Sofia G.G. Santos
AVA. T. Viana
A. T. Viana
AGAlexandra G. Gonçalves
Alexandra G. Gonçalves
ONOlga C. Nunes
Olga C. Nunes
Olívia Salomé G. P. SoaresOlívia Salomé G. P. Soares
Olívia Salomé G. P. Soares
The presence of heavy metals and/or harmful bacteria in drinking water represents significant risks to human health. This study aimed to develop a low-cost water treatment technology using synthesized nanocomposites with metal nanoparticles supported on activated carbon (AC) for bacteria and heavy metal removal. In addition, the performance of the developed nanomaterials was compared with that of commercial materials - carbon fibers of three different typologies. The chemical and textural properties of all tested materials were characterized. To simulate a technology to be applied in a water outlet point, removal tests were carried out in a continuous system using suspensions of Escherichia coli and/or Staphylococcus aureus, wherein the contact time with the two phases was minimal (1 min). The obtained results revealed that iron and copper oxides supported on AC with a calcination treatment (CuFeO/AC-C) was the nanocomposite with the best performance, achieving a 6 log reduction for both bacteria in the same suspension up to 9 h operation. A mix of bacteria and heavy metals, simulating a real water, was treated with CuFeO/AC-C obtaining a 6 log reduction of bacteria, a Pb2+ removal >99.9% and Cd2+ removal between 97 and 98% over 180 passage times.