The high specific strength, good corrosion resistance, and great biocompatibility make titanium and its alloys the ideal materials for biomedical metallic implants. Ti-6Al-4V alloy is the most employed in practical biomedical applications because of the excellent combination of strength, fracture toughness, and corrosion resistance. However, recent studies have demonstrated some limits in biocompatibility due to the presence of toxic Al and V. Consequently, scientific literature has reported novel biomedical β-Ti alloys containing biocompatible β-stabilizers (such as Mo, Ta, and Zr) studying the possibility to obtain similar performances to the Ti-6Al-4V alloys. The aim of this review is to highlight the corrosion resistance of the passive layers on biomedical Ti-6Al-4V and β-type Ti alloys in the human body environment by reviewing relevant literature research contributions. The discussion is focused on all those factors that influence the performance of the passive layer at the surface of the alloy subjected to electrochemical corrosion, among which the alloy composition, the method selected to grow the oxide coating, and the physicochemical conditions of the body fluid are the most significant.
1 December 2020 in Journal of Trace Elements in Medicine and Biology
Few studies have been able to elucidate the correlation of factors determining the strength of interaction between bacterial cells and substrate at the molecular level. The aim was to answer the following question: What biophysical factors should be considered when analyzing the bacterial adhesion strength on titanium surfaces and its alloys for implants quantified by atomic force microscopy? This review followed PRISMA. The search strategy was applied in four databases. The selection process was carried out in two stages. The risk of bias was analyzed. One thousand four hundred sixty-three articles were found. After removing the duplicates, 1126 were screened by title and abstract, of which 57 were selected for full reading and 5 were included; 3 had a low risk of bias and 2 moderated risks of bias. (1) The current literature shows the preference of bacteria to adhere to surfaces of the same hydrophilicity. However, this fact was contradicted by this systematic review, which demonstrated that hydrophobic bacteria developed hydrogen bonds and adhered to hydrophilic surfaces; (2) the application of surface treatments that induce the reduction of areas favorable for bacterial adhesion interfere more in the formation of biofilm than surface roughness; and (3) bacterial colonization should be evaluated in time-dependent studies as they develop adaptation mechanisms, related to time, which are obscure in this review.
Resumo Introdução A modificação físico-química da superfície de mini-implantes utilizados no suporte de overdentures pode influenciar o desempenho mecânico dos mesmos. Objetivo Avaliar a influência de um tratamento de superfície do tipo nanométrico no desempenho mecânico de novos designs de mini-implantes. Material e método Foram utilizados 40 mini-implantes (Ti-6Al-4V), com Ø 2 mm × 10 mm de comprimento e dois designs diferentes, rosqueado e helicoidal, divididos em quatro grupos (n=10), de acordo com o modelo e a presença ou a ausência de tratamento superficial. O desempenho mecânico foi avaliado por meio de torque de inserção e ensaio de arrancamento em cilindros ósseos suínos. Análise de variância ANOVA e teste de Tukey, com significância de 5%, foram utilizados para análise estatística dos dados. Resultado Foi observada diferença estatisticamente significante entre os grupos com e sem tratamento para torque de inserção (p<0,001), e ensaio de arrancamento (p=0,006), sendo a maior média para o grupo com tratamento, independentemente do design. Na comparação entre os designs, o rosqueado apresentou média significativamente maior (p<0,001) que o helicoidal. Conclusão: O tratamento de superfície nanométrico viabilizou melhor desempenho mecânico dos mini-implantes avaliados. Com relação aos novos designs testados, o rosqueado apresentou resultados superiores ao helicoidal.
24 November 2025 in Materials Today Communications
Additive manufacturing (AM) and subtractive manufacturing (SM) are common techniques used for the fabrication of zirconia dental prostheses. However, variability in zirconia composition, AM technologies, and processing parameters has led to heterogeneous microstructural and mechanical results. This scoping review aims to map and critically describe the available in vitro experimental evidence on how composition, manufacturing route (AM or SM), and processing variables influence the microstructural characteristics and flexural strength of zirconia. The review followed PRISMA-ScR guidelines and was registered on the Open Science Framework. A comprehensive search was conducted in PubMed, Embase, Web of Science, ScienceDirect, ProQuest, and Google Scholar, with no time restrictions. Two independent reviewers performed study selection in a blinded manner using predefined eligibility criteria, which included exclusively in vitro experimental studies. Of the 145 articles identified, only eight met the inclusion criteria. The included in vitro studies showed substantial heterogeneity in zirconia compositions, AM technologies, thermal processing protocols, and mechanical testing conditions. SM was generally associated with lower porosity and higher flexural strength values, whereas overlapping ranges of flexural strength and microstructural features were observed in some AM systems depending on composition and processing parameters. Current evidence remains limited and heterogeneous, precluding consistent comparisons between AM and SM zirconia, as well as generalized conclusions regarding their relative performance. These findings highlight the need for standardized experimental protocols and composition-specific analyses in future studies.