Kristina Yurevna Sapozhnikova

Mrs. Kristina Yurevna Sapozhnikova

Siberian Federal University, Krasnoyarsk, Russia
+1
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 September 2021 in Polymers
Verified
Journal Article
Open access
PDF file
NZNatalia Zhila
Natalia Zhila
KSKristina Yurevna Sapozhnikova
Kristina Yurevna Sapozhnikova
EKEvgeniy Kiselev
Evgeniy Kiselev
AVAlexander D. Vasiliev
Alexander D. Vasiliev
INIvan Nemtsev
Ivan Nemtsev
Tatiana VolovaTatiana Volova
Tatiana Volova
The bacterial strain isolated from soil was identified as Cupriavidus necator IBP/SFU-1 and investigated as a PHA producer. The strain was found to be able to grow and synthesize PHAs under autotrophic conditions and showed a broad organotrophic potential towards different carbon sources: sugars, glycerol, fatty acids, and plant oils. The highest cell concentrations (7–8 g/L) and PHA contents were produced from oleic acid (78%), fructose, glucose, and palm oil (over 80%). The type of the carbon source influenced the PHA chemical composition and properties: when grown on oleic acid, the strain synthesized the P(3HB-co-3HV) copolymer; on plant oils, the P(3HB-co-3HV-co-3HHx) terpolymer, and on the other substrates, the P(3HB) homopolymer. The type of the carbon source influenced molecular-weight properties of PHAs: P(3HB) synthesized under autotrophic growth conditions, from CO2, had the highest number-average (290 ± 15 kDa) and weight-average (850 ± 25 kDa) molecular weights and the lowest polydispersity (2.9 ± 0.2); polymers synthesized from organic carbon sources showed increased polydispersity and reduced molecular weight. The carbon source was not found to affect the degree of crystallinity and thermal properties of the PHAs. The type of the carbon source determined not only PHA composition and molecular weight but also surface microstructure and porosity of the polymer films. The new strain can be recommended as a promising P(3HB) producer from palm oil, oleic acid, and sugars (fructose and glucose) and as a producer of P(3HB-co-3HV) from oleic acid and P(3HB-co-3HV-co-3HHx) from palm oil.

Verified
Journal Article
Open access
PDF file
NZNatalia Zhila
Natalia Zhila
EKEvgeniy Kiselev
Evgeniy Kiselev
VVVladimir V. Volkov
Vladimir V. Volkov
OMOlga Ya. Mezenova
Olga Ya. Mezenova
KSKristina Yurevna Sapozhnikova
Kristina Yurevna Sapozhnikova
Tatiana VolovaTatiana Volova
Tatiana Volova
The synthesis of PHA was first investigated using WFOs obtained from smoked-sprat heads, substandard fresh sprats, and fresh mackerel heads and backbones. All the WFOs ensured the growth of the wild-type strain Cupriavidus necator B-10646 and the synthesis of PHA, regardless of the degree of lipid saturation (from 0.52 to 0.65) and the set and ratio of fatty acids (FA), which was represented by acids with chain lengths from C14 to C24. The bacterial biomass concentration and PHA synthesis were comparable (4.1–4.6 g/L and about 70%) when using WFO obtained from smoked-sprat heads and fresh mackerel, and it was twice as high as the bacterial biomass concentration from the fresh sprat waste. This depended on the type of WFO, the bacteria synthesized P(3HB) homopolymer or P(3HB-co-3HV-co-3HHx) copolymer, which had a lower degree of crystallinity (Cx 71%) and a lower molecular weight (Mn 134 kDa) compared to the P(3HB) (Mn 175–209 kDa and Cx 74–78%) at comparable temperatures (Tmelt and Tdegr of 158–168 °C and 261–284 °C, respectively). The new types of WFO, studied for the first time, are suitable as a carbon substrates for PHA synthesis. The WFOs obtained in the production of canned Baltic sprat and Baltic mackerel can be considered a promising and renewable substrate for PHA biosynthesis.

8 May 2023 in Processes
Verified
Journal Article
Open access
PDF file
NZNatalia Zhila
Natalia Zhila
KSKristina Yurevna Sapozhnikova
Kristina Yurevna Sapozhnikova
EKEvgeniy Kiselev
Evgeniy Kiselev
Ekaterina I. ShishatskayaEkaterina I. Shishatskaya
Ekaterina I. Shishatskaya
Tatiana VolovaTatiana Volova
Tatiana Volova
The study addresses the growth of the new wild-type strain Cupriavidus necator IBP/SFU-1 and the synthesis of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB) on media containing fructose and three different precursors of 4HB (ε-caprolactone 1,4-butanediol and 1,6-hexanediol). It was found that ε-caprolactone is the best precursor for the synthesis of P(3HB-co-4HB) copolymers. By varying the concentration and number of doses of ε-caprolactone added into the bacterial culture, it was possible to find conditions that ensured the synthesis of P(3HB-co-4HB) copolymers with different contents of 4HB (from 3–5 to 22.4 mol.%). The physicochemical properties of the copolymers were investigated depending on the proportions of 4HB monomers. The effect of 4HB monomers was manifested in a certain decrease in the weight-average molecular weight (Mw) (272–353 kDa), number-average molecular weight (Mn) (47–67 kDa) of the samples, and an increase in polydispersity (5.09–6.71) compared with P(3HB). The crystallinity degree decreased with an increasing fraction of the 4HB units (from 72 to 59%, as the 4HB content increased from 0 to 22.4 mol.%). In addition, the increase in 4HB content affected the temperature parameters (melting point, glass transition temperature, crystallization temperature, and thermal degradation temperature).

9 October 2022 in Polymers
Verified
Journal Article
Open access
PDF file
NZNatalia Zhila
Natalia Zhila
KSKristina Yurevna Sapozhnikova
Kristina Yurevna Sapozhnikova
EKEvgeniy Kiselev
Evgeniy Kiselev
INIvan Nemtsev
Ivan Nemtsev
ALAnna V Lukyanenko
Anna V Lukyanenko
Tatiana VolovaTatiana Volova
Tatiana Volova
Synthesis of P(3HB-co-3HV-co-4HV) copolymers by the wild-type strain Cupriavidus necator B-10646 on fructose or sodium butyrate as the main C-substrate with the addition of γ-valerolactone as a precursor of 3HV and 4HV monomers was studied. Bacterial cells were cultivated in the modes that enabled production of a series of copolymers with molar fractions of 3HV (from 7.3 to 23.4 mol.%) and 4HV (from 1.9 to 4.7 mol.%) with bacterial biomass concentration (8.2 ± 0.2 g/L) and PHA content (80 ± 2%). Using HPLC, DTA, DSC, X-Ray, SEM, and AFM, the physicochemical properties of copolymers and films prepared from them have been investigated as dependent on proportions of monomers. Copolymers are characterized by a reduced degree of crystallinity (Cx 38–49%) molecular weight characteristics Mn (45–87 kDa), and Mw (201–248 kDa) compared with P(3HB). The properties of the films surface of various composition including the porosity and surface roughness were studied. Most of the samples showed a decrease in the average pore area and an increase in their number with a total increase in 3HV and 4HV monomers. The results allow scaling up the productive synthesis of P(3HB-co-3HV-co-4HV) copolymers using Cupriavidus necator B-10646.

5 May 2024 in Polymers
Verified
Journal Article
Open access
PDF file
NZNatalia Zhila
Natalia Zhila
KSKristina Yurevna Sapozhnikova
Kristina Yurevna Sapozhnikova
EKEvgeniy Kiselev
Evgeniy Kiselev
Ekaterina I. ShishatskayaEkaterina I. Shishatskaya
Ekaterina I. Shishatskaya
Tatiana VolovaTatiana Volova
Tatiana Volova
It has been established that the wild-type Cupriavidus necator B-10646 strain uses saturated fatty acids (SFAs) for growth and polyhydroxyalkanoate (PHA) synthesis. It uses lauric (12:0), myristic (14:0), palmitic (16:0) and stearic (18:0) acids as carbon sources; moreover, the elongation of the C-chain negatively affects the biomass and PHA yields. When bacteria grow on C12 and C14 fatty acids, the total biomass and PHA yields are comparable up to 7.5 g/L and 75%, respectively, which twice exceed the values that occur on longer C16 and C18 acids. Regardless of the type of SFAs, bacteria synthesize poly(3-hydroxybutyrate), which have a reduced crystallinity (Cx from 40 to 57%) and a molecular weight typical for poly(3-hydroxybutyrate) (P(3HB)) (Mw from 289 to 465 kDa), and obtained polymer samples demonstrate melting and degradation temperatures with a gap of about 100 °C. The ability of bacteria to assimilate SFAs opens up the possibility of attracting the synthesis of PHAs on complex fat-containing substrates, including waste.

15 July 2023 in Processes
Verified
Journal Article
Open access
PDF file
NZNatalia Zhila
Natalia Zhila
KSKristina Yurevna Sapozhnikova
Kristina Yurevna Sapozhnikova
EKEvgeniy Kiselev
Evgeniy Kiselev
Ekaterina I. ShishatskayaEkaterina I. Shishatskaya
Ekaterina I. Shishatskaya
Tatiana VolovaTatiana Volova
Tatiana Volova
The waste fish oil obtained from Baltic sprat waste in the production of canned sprats was studied as a sole carbon substrate for PHA synthesis by the wild-type strain Cupriavidus necator B-10646. Sprat oil contained a set of fatty acids with a chain length from C14 to C24, saturation factor 0.63, and provided bacterial growth and PHA synthesis. Bacteria metabolized fatty acids unevenly utilizing polyenoic acids and not using monoenoic and saturated acids. The bacterial biomass yield and the intracellular polymer concentration were 6.5 ± 0.5 g/L and 65 ± 5% by fed-batch culture in flasks. The synthesized PHAs were three-component copolymers with a predominance (97–98 mol.%) of 3-hydroxybutyrate monomers and small inclusions of 3-hydroxyvalerate and 3-hydroxyhexanoate; the ratio of monomers changed slightly depending on the sprat oil concentration. The series of samples had a temperature (Tmelt) of 158–165 °C, a molecular weight (Mw) of 540–760 kDa, and a degree of crystallinity (Cx) of 66–72%. For the first time, the waste fish oil from the production of sprats studied as a carbon substrate is a promising, affordable, and renewable substrate for PHA biosynthesis.