KATARZYNA TRELA

Dr. KATARZYNA TRELA

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 June 2019 in Energies
Verified
Journal Article
Open access
PDF file
Konstanty Marek GawrylczykKonstanty Marek Gawrylczyk
Konstanty Marek Gawrylczyk
KTKATARZYNA TRELA
KATARZYNA TRELA
The aim of the article is to present the method for modeling transformer winding inductance, taking into account the complex magnetic permeability and equivalent electric conductivity of the magnetic core. In the first stage of the research, a physical model of a 24-turn coil wound on the distribution transformer core was prepared. The Frequency Response Analysis (FRA) measurements of the coil were taken; then, the inductance of the coil as a function of frequency was calculated from the received frequency response curves. In the second stage, two-dimensional (2D) and three-dimensional (3D) computer models of the coil based on the finite element method (FEM) were established. In order to obtain the equivalent inductance characteristics of the winding modeled in 2D and 3D in a wide frequency range, the equality of the reluctance of the limbs and yokes in both models was assured. In the next stage of the research, utilization of the equivalent properties for the laminated magnetic material simulations was proposed. This outcome can be used to calculate the frequency response of the winding of the power transformer. The other obtained result is the method for modeling the resonance slope, which is visible on the inductance curve received from the FRA measurement.

12 March 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SBSzymon Banaszak
Szymon Banaszak
Konstanty Marek GawrylczykKonstanty Marek Gawrylczyk
Konstanty Marek Gawrylczyk
KTKATARZYNA TRELA
KATARZYNA TRELA
PBPatryk Bohatyrewicz
Patryk Bohatyrewicz
Frequency Response Analysis (FRA) is a test method used for assessment of mechanical condition of transformer active parts. Its biggest problem is the interpretation of test results, namely the relationship between scale of differences between compared curves and the decision for further operation of the given transformer. Very often visible differences between two FRA curves do not mean that there is a deformation in the winding. The cause of the curve shift may come from other elements of the transformer that influence inductive or capacitive parameters. This paper takes under consideration the influence of both capacitance and inductance changes on transformer frequency response (FR). The analysis is performed with the computer model of a transformer and also some experimental results are presented, showing the influence of capacitance and inductance changes on the FR of real transformers. The results of research showed that this influence may lead to misleading effects on the shape of FR characteristics. The paper presents an analysis that can be used in the assessment of FRA measurement, especially in the case of uncertain data comparison results.

17 March 2020 in Energies
Verified
Journal Article
Open access
PDF file
SBSzymon Banaszak
Szymon Banaszak
Konstanty Marek GawrylczykKonstanty Marek Gawrylczyk
Konstanty Marek Gawrylczyk
KTKATARZYNA TRELA
KATARZYNA TRELA
This paper describes the approach to the frequency response modelling of transformer windings consisting of coils connected in parallel. At present, computer models are intensively developed with the aim of simulating the influence of faults on the frequency response of the active part of power transformers. Frequency response analysis (FRA) is one of the standard methods used for the assessment of the mechanical condition of a transformer’s windings and core. The interpretation of the FRA results is crucial in the diagnostics of the active part of the transformer. Proper simulations of the FRA results allow the improvement and simplification of the interpretation process of the windings’ faults. Usually only serial winding wires are simulated in computer modelling and parallel wires are simplified, leading to simulation inaccuracies. In this work, a combined electromagnetic field/network method, which includes parallel connections of the coils, is proposed. The method is based on lumped RLC elements. The results of the analysis conducted by the computer model are referred to as the real transformer measurement. The modelling was also performed for the case of a winding with a fault. The results of modelling were assessed with four numerical indices used for FRA interpretation.

29 October 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KTKATARZYNA TRELA
KATARZYNA TRELA
Konstanty Marek GawrylczykKonstanty Marek Gawrylczyk
Konstanty Marek Gawrylczyk
One of the standard diagnostic methods for power transformers is frequency response analysis (FRA). This paper deals with progress in the frequency response interpretation of these very important appliances in the power network. Simulations of the frequency response of the transformer windings are a useful way to improve the correct assessment of FRA results. One of the disadvantages of FRA modelling is time-consuming analysis, especially of large multilayer windings. The aim of this article is to develop a numerical model, which would reduce the duration of the electromagnetic field analysis of the winding with hundreds of turns. The approach introduced in the paper describes the simple two-dimensional (2D) finite elements method (FEM) model, which provides the results comparable to the three-dimensional (3D) model. Moreover, the paper presents the numerical models, which demonstrate the influence of the remaining windings on the inductance of tested winding. As a result of the conducted research, the comparison of inductance curve obtained from FRA measurement on the physical model with modelled resonance slope is presented, both for 2D and 3D cases.

4 July 2024 in Energies
Verified
Journal Article
Open access
PDF file
KTKATARZYNA TRELA
KATARZYNA TRELA
KGKonstanty Marek Gawrylczyk
Konstanty Marek Gawrylczyk
The aim of the article is to present the method of modeling the frequency response of the transformer windings with axial displacements. Frequency response analysis (often referred to as FRA or SFRA) is a powerful and sensitive method for testing the mechanical integrity of transformer cores, windings, and press frames in power transformers. The proper interpretation of FRA results is crucial in assessing winding faults. Computer modeling of transformer active part deformations is one way to expand knowledge about the impact of mechanical faults on the shape of the frequency response (FR) curve. The data collected from these models can be used as training data sets for artificial intelligence tools. An automatic tool developed from this approach would significantly improve the accuracy of the FRA method and simplify the interpretation and evaluation of results. The described study utilizes new types of lumped parameter models with input data obtained from the FEM analysis. The research conducted shows the influence of the winding axial deformation on the frequency response curve and provides information on the sensitivity of the FR curve’s shape to this type of deformation. A series of tests, which involved measuring and simulating typical axial damages, were conducted to evaluate the effectiveness of the presented algorithms.

1 January 2018 in PRZEGLĄD ELEKTROTECHNICZNY
Verified
Journal Article
Closed access
KTKATARZYNA TRELA
KATARZYNA TRELA
The aim of the article is to present the research carried out for verification of simulated transformer windings inductances. In the first stage of the research, the coil was wound on the distribution transformer core and the frequency response of this coil was measured. In the second stage, the computer model based on 3D Finite Elements Method (FEM) was prepared. Surveys indicate the need to assume equivalent core material properties in order to carry out the correct simulation. Presented research can be used for modelling the inductance of the winding in wide frequency range.