Kadyrzhan Zaurbekov

Dr. Kadyrzhan Zaurbekov

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 April 2026 in Energies
Verified
Journal Article
Open access
PDF file
Kadyrzhan ZaurbekovKadyrzhan Zaurbekov
Kadyrzhan Zaurbekov
SZSeitzhan Zaurbekov
Seitzhan Zaurbekov
Boris V MalozyomovBoris V Malozyomov
Boris V Malozyomov
Nikita MartyushevNikita Martyushev
Nikita Martyushev
The development of high-viscosity oil fields requires technologies that provide not only the thermal mobilization of oil, but also an economically justified level of production with a high energy intensity of the process. One of the most effective technologies of this type is steam-assisted gravity oil drainage (SAGD), but its practical effectiveness is determined by the combined influence of reservoir geology, heat-transfer parameters, and market conditions. The paper proposes a reduced physics-guided model for the rapid technical and economic screening of SAGD in high-viscosity oil fields. The methodological contribution lies in linking geological screening, steam energy input, useful heat delivered to the reservoir, production response, and operating profit within one interpretable analytical chain suitable for pre-feasibility assessment. The study is based on an extended-scenario thermoeconomic analysis of representative heavy-oil development conditions. It is shown that, in a favorable mode, at a depth of about 400 m, oil viscosity of 15,000 cP, steam consumption of 500 t/day and heat-transfer coefficient of 0.7, the estimated production reaches 513–520 t/day, and the net profit is 20,000–22,000 USD/day. In an unfavorable mode, with a depth of about 1000 m, a viscosity of 20,000 cP, a heat-transfer coefficient of 0.4, and a high steam cost, production decreases to 210–230 t/day, and the economic result becomes negative. It has been established that the cost of steam, heat transfer, and the price of oil have a decisive impact on profitability.

10 April 2024 in Chemical Papers
Verified
Journal Article
Closed access
PDF file
Kadyrzhan ZaurbekovKadyrzhan Zaurbekov
Kadyrzhan Zaurbekov
ASAskar Syzdykov
Askar Syzdykov
SZSeitzhan Zaurbekov
Seitzhan Zaurbekov
JIJamilyam Ismailova
Jamilyam Ismailova

7 July 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Kadyrzhan ZaurbekovKadyrzhan Zaurbekov
Kadyrzhan Zaurbekov
SZSeitzhan Zaurbekov
Seitzhan Zaurbekov
EAErtis Aksholakov
Ertis Aksholakov
Boris V MalozyomovBoris V Malozyomov
Boris V Malozyomov
Nikita MartyushevNikita Martyushev
Nikita Martyushev
Steam injection is an energy-intensive enhanced-oil-recovery method for high-viscosity reservoirs, and its performance is controlled by coupled heat delivery, steam condensation, temperature-dependent viscosity reduction, mobility change and reservoir filtration response. This study develops an experimentally validated physics-motivated residual-learning framework for forecasting oil production and selecting thermally rational steam-supply regimes. The model combines a physics-motivated semi-empirical baseline describing useful steam-related heat input, calibrated viscosity transformation, mobility growth, steam–oil ratio and a thermal-energy efficiency index with a residual-learning block fitted to measured regime-level records. The supervised forecasting task was performed at the regime level using 200 operating-regime records treated as the effective modelling units, with nested logs aggregated within regimes and within-group dependence examined through campaign-, reservoir-state- and well-availability-based checks. The 4800 steam-injection log entries and 4800 production-response log entries were treated as nested time-resolved measurements used only for regime-level aggregation, feature construction and quality-control checks; they were not counted as independent training samples. Blind-test validation produced R2 values of 0.974 for oil rate, 0.988 for cumulative oil production, 0.731 for steam–oil ratio and 0.828 for the thermal-energy efficiency index; the corresponding MAPE values were 4.56%, 3.86%, 4.48% and 3.29%, respectively. The error structure shows higher uncertainty for composite indicators than for direct production responses, which is consistent with the measurement chain. Response-surface and Pareto analyses identify bounded steam-supply operating regions where production gain remains balanced against specific steam consumption and the thermal-energy efficiency index.

7 July 2026 in Energies
Verified
Journal Article
Open access
PDF file
Kadyrzhan ZaurbekovKadyrzhan Zaurbekov
Kadyrzhan Zaurbekov
SZSeitzhan Zaurbekov
Seitzhan Zaurbekov
STSergey Trebukhov
Sergey Trebukhov
Boris V MalozyomovBoris V Malozyomov
Boris V Malozyomov
Nikita MartyushevNikita Martyushev
Nikita Martyushev
Steam-assisted gravity drainage (SAGD) is constrained in deep heavy-oil reservoirs by wellbore heat losses, delayed steam-chamber development and high steam–oil ratio (SOR). This study develops an experimentally parameterized reduced-order screening framework for thermocable-assisted SAGD, formulated as a digital-twin prototype that couples heat transfer, temperature-dependent viscosity, chamber-growth geometry and energy-efficiency indicators. The formulation is evaluated within an experimentally parameterized screening matrix covering steam temperature, oil viscosity, permeability, depth, cable power and early heating time. The graphical dependencies are presented in a unified publication format and supplemented by heat-balance, chamber-field, sensitivity and operating-window analyses. For the reference experimental case, thermocable support increases oil rate from 84.1 to 96.1 t/day and reduces SOR from 2.70 to 2.30 t/t. The cable heat input is small relative to useful steam heat; therefore, its effect is interpreted through local compensation of downstream heat deficit and longitudinal temperature stabilization rather than through bulk energy addition. The strongest sensitivity is associated with steam rate, oil viscosity and depth, whereas cable power shows a beneficial but saturating effect. The proposed reduced-order digital-twin prototype is intended for feasibility screening, preliminary operating-window selection and prioritization of candidate regimes for detailed thermal-reservoir simulation and subsequent field-scale validation.

2 July 2026 in Energies
Verified
Journal Article
Open access
PDF file
Kadyrzhan ZaurbekovKadyrzhan Zaurbekov
Kadyrzhan Zaurbekov
SZSeitzhan Zaurbekov
Seitzhan Zaurbekov
RSRaushan G. Sarmurzina
Raushan G. Sarmurzina
Boris V MalozyomovBoris V Malozyomov
Boris V Malozyomov
Nikita MartyushevNikita Martyushev
Nikita Martyushev
Steam-assisted gravity drainage (SAGD) remains one of the most energy-intensive technologies for heavy-oil recovery because production response is controlled not only by injected heat but also by spatial heat delivery, wellbore losses, viscosity reduction and steam chamber geometry. This paper develops a physics-guided digital twin for SAGD with distributed thermocable assistance and a bounded residual machine learning correction layer. The framework combines a heat-delivery model, temperature-dependent oil mobility, scenario analysis and decision-oriented visualization within a reproducible computational experiment. A reference operating envelope was formulated for heavy-oil reservoirs, including depth, horizontal well length, permeability, porosity, oil viscosity, steam temperature, injection rate, thermocable power and cable coverage. The analysis includes sensitivity testing, cumulative-production/SOR dynamics and Pareto-type operating-window mapping. In the reference computational scenario, which is treated as an illustrative screening case rather than as field-history validation, the thermocable-assisted hybrid configuration changed the model-calculated eight-year cumulative oil from 452.5 × 103 m3 to 615.2 × 103 m3 and the mean SOR from 3.17 to 2.72 t/t relative to the conventional SAGD physics-core case. The largest sensitivities were associated with steam rate, steam temperature, initial viscosity and permeability. Within the declared operating envelope, the results support the use of the framework as a pre-field screening tool and indicate that thermocable assistance should be interpreted primarily as spatial heat distribution control rather than as a field-validated production-improvement guarantee.

1 January 2021 in Mining informational and analytical bulletin
Verified
Journal Article
Closed access
SZSeitzhan Zaurbekov
Seitzhan Zaurbekov
GAG.K. Akanova
G.K. Akanova
DBDszhan Balgayev
Dszhan Balgayev
Kadyrzhan ZaurbekovKadyrzhan Zaurbekov
Kadyrzhan Zaurbekov
Рассмотрен вопрос увеличения ресурса работы поршневых и плунжерных насосов за счет совершенствования конструкции шариковых всасывающих и нагнетательных клапанов. Рассмотрены плунжерные насосы горизонтального и вертикального действия, оснащенные шариковыми всасывающими и нагнетательными клапанами. Подробно рассмотрены особенности конструкции клапанного узла серийных насосов, сделано предложение по совершенствованию конструкции клапана, направленное на обеспечение вращения шарика клапана при его открытии и закрытии. Традиционная конструкция шарикового клапана состоит из следующих основных частей: корпуса, посадочного элемента - седла и запорного элемента - шарика. В процессе открытия клапана шарик поднимается вверх потоком всасываемой жидкости, а при закрытии клапана шарик движется вниз и садится на седло. Движение шарика вверх ограничивается конструкцией корпуса. Геометрические конструктивные размеры элементов шарикового клапана определяются техническими параметрами насоса, такими как подача, давление и т.д. В процессе работы шарикового клапана запорный элемент (шарик) «садится» одной и той же поверхностью на седло, в связи с чем поверхность касания «шарик-седло» на обоих элементах изнашивается и, как следствие, наблюдается потеря герметичности, которая в течение времени работы интенсивно растет и в конечном итоге требует замены клапанного узла насоса. Для увеличения межремонтного периода работы узла «шарик-седло» предложено конструктивное решение по обеспечению вращения шарика вокруг своей оси при открытии клапана, что позволит сделать посадку шарика на седло каждый раз новой поверхностью. Вращение шарика всасывающего клапана при открытии, т.е. движение шарика вверх (всасывание) осуществляется за счет установки на внутренней поверхности седла пластины, обеспечивающей смещение направления движения потока относительно центральной оси клапана. Вследствие завихрения потока жидкости возникает неравномерность обтекания шарика, что приводит к его принудительному вращению при движении вверх как вокруг горизонтальной, так и относительно вертикальной оси симметрии, за счет чего каждый раз при движении вниз шар «садится» на седло новой поверхностью), прижимаясь при этом к седлу надклапанным столбом откачиваемой жидкости и закрывая тем самым клапан. Конструктивное решение направлено на увеличение межремонтного периода работы...