In world practice, the role of reproduction of raw material base of oil production by implementing modern methods of oil recovery enhancement (thermal, gas, chemical, microbiological) on the basis of innovative techniques and technologies is rapidly growing and is becoming more important. It is concluded that at present, the priority of increasing oil reserves in world oil production is the development and industrial introduction of modern integrated methods of enhanced oil recovery, which can provide a synergistic effect in the development of new and developed oil fields. This article presents a review and comparative analysis of theoretical and practical methods of improving oil recovery of conventional and unconventional reservoirs. The paper examines in detail methods of improving oil recovery, taking into account the factors of enhanced oil recovery of oil reservoirs. Considered the main methods and technologies currently used to develop oil fields and recommendations for their effective use, taking into account the variety of external factors of oil production: the geological structure of the reservoir, its volume, and properties of oils. It is shown that there is no universal method of oil reservoir development, and it must be chosen after a thorough feasibility study among several proposed models. When describing the methods of enhanced oil recovery, special attention is also paid to the physical processes that occur as a result of applying the technology. In conclusion, the positive and negative characteristics of the presented methods included in EOR are presented, and recommendations that may influence the choice of practical solutions for engineers and oil producers are given. Conclusions are made that development systems, placement and choice of operating mode of wells essentially depend on the geological structure of the reservoir, its volume and properties of oils. An important role in this is the construction of a geological model of the production facility. The used hydrodynamic models of development are based on physical laws, about which oil producers sometimes don’t even suspect, and the authors of the models are not always able to convey it to the real producers. The authors consider it reasonable to make a logical generalizing conclusion that understanding processes occurring in the reservoir and taking appropriate measures for optimization and intensification of oil production will allow making oil production as effective as possible.

The article reviews the existing methods of increasing the energy efficiency of electric transport by analyzing and studying the methods of increasing the energy storage resource. It is grouped according to methods, approaches, and solutions. The most effective methods and ways of their implementation are identified. General methods of increasing energy efficiency, methods of increasing recuperation during braking, methods of energy-efficient energy consumption, the use of energy-saving technologies, and improving the energy efficiency of the traction drive are considered. The purpose of this work is to identify the main operating factors on the basis of a critical review of existing methods for assessing the technical condition of batteries and experimental results on the degradation of lithium-ion batteries. Using the great experience of the research group in the field of modeling, diagnostics, and forecasting of life of electric cars, as well as their intellectual management, the new theoretical and practical methods of integrated assessment of the parameters of the traction battery and state of charge, which are operated in the heavy forced regenerative regimes of electric traction, are created and proposed. A great role is played by the construction of the transport model. The development is based on physical laws that passengers and vehicle owners are unaware of. For each model there is a different area of application, and what is suitable for one object may not be suitable for another. The overview shows that there is no one-size-fits-all way to improve energy efficiency. It is necessary to make a choice among several proposed models after a thorough feasibility study.

The article provides an overview and comparative analysis of various types of batteries, including the most modern type—lithium-ion batteries. Currently, lithium-ion batteries (LIB) are widely used in electrical complexes and systems, including as a traction battery for electric vehicles. Increasing the service life of the storage devices used today is an important scientific and technical problem due to their rapid wear and tear and high cost. This article discusses the main approaches and methods for researching the LIB resource. First of all, a detailed analysis of the causes of degradation was carried out and the processes occurring in lithium-ion batteries during charging, discharging, resting and difficult operating conditions were established. Then, the main factors influencing the service life are determined: charging and discharging currents, self-discharge current, temperature, number of cycles, discharge depth, operating range of charge level, etc. when simulating a real motion process. The work considers the battery management systems (BMS) that take into account and compensate for the influence of the factors considered. In the conclusion, the positive and negative characteristics of the presented methods of scientific research of the residual life of LIB are given and recommendations are given for the choice of practical solutions to engineers and designers of batteries. The work also analyzed various operating cycles of electric transport, including heavy forced modes, extreme operating modes (when the amount of discharge and discharge of batteries is greater than the nominal value) and their effect on the degradation of lithium-ion batteries.

A successful guaranteed launch of a mainline diesel locomotive is one of the most important and urgent problems of the rolling stock operation. Improvement of the start-up system of the main diesel locomotive when using a supercapacitor allows multiple restarts of diesel locomotives, meaning that the operation of the diesel locomotive can be stopped several times without wasting fuel in idle operations. In this study, we simulated the electric starting circuit of a diesel locomotive with a block of supercapacitors using the Matlab Simulink program. The simulation results show that using only a supercapacitor in the start-up system is impossible. Even though the supercapacitor produces the required current and voltage, its operating time is extremely insufficient. Using a storage battery along with a supercapacitor in the diesel locomotive start-up system is most effective. This reduces the peak current load on the standard battery. The article suggests an effective principle for starting a mainline diesel locomotive and provides an effective circuit solution involving a supercapacitor. Based on the booster stabilizer scheme, a new scheme was modeled to study the successful launch of a diesel locomotive that has various start-up systems. Applying a supercapacitor in the start-up system of a main diesel locomotive is proposed and the results of its use are presented. In addition, this study defines the basic requirements for using a system based on a battery in conjunction with a supercapacitor. Characteristics such as the temperature range of the system are shown.

Decarbonization of the mining industry on the basis of closing the energy generation, on the basis of cogeneration of coal mine methane, and on the internal consumption of the mine is a promising direction in ensuring sustainable development. Known problems of deep underground mining do not allow for realizing the potential of man-made gas reservoirs due to the deterioration of the conditions of development of reserves of georesources. The aim of the work was to improve recommendations for the substantiation of drilling parameters for undermined drainage boreholes for increasing methane production from unconventional coal-gas collectors. The authors’ approach innovation lies in the possibility of using the established patterns of better natural stability of undermined boreholes to optimize them as spatial orientation parameters in an existing drilling passport for the improvement of methane extraction productivity. For this purpose, smoothing (LOESS) of the experimental data of two similar types of wells was used; then deterministic interpolation methods in combination with a three-dimensional representation of the response function in “gnuplot” were used. As a result, it was found that the increase in the inclination angle from 40° to 60° leads to a significant transformation of the model of the studied process, accompanied by a decline in the dynamics of methane emission and a decrease in the distance of the productive work zone of this type of well from 13 to 5 m before the roof landing, which then is replaced by a sharp increase in the productive work zone up to 35 m ahead of the longwall face. This allows under specific conditions for recommending increasing the productivity of methane capex from technogenic disturbed coal-gas reservoir replacement of wells with a smaller angle of rise to the transition to a more frequent grid of clusters from wells #4.

Electric vehicles are the most innovative and promising area of the automotive industry. The efficiency of a traction battery is an important factor in the performance of an electric vehicle. This paper presents a mathematical model of an electric truck, including modules for the traction battery to determine the depth of battery discharge during the operation of the electric truck, a traction electric system for the electric truck and a system for calculating traction forces on the shaft in electric motors. As a result of the modelling, the charging and discharging currents of an accumulator battery in a real cycle of movement in peak and nominal modes of operation in electric motors and at different voltages of the accumulator battery are determined. A functional scheme of a generalized model of the electric vehicle traction electrical equipment system is developed. An experimental battery charge degree, torques of asynchronous electric motors, temperature of electric motors and inverters, battery voltage and the speed of electric motors have been measured and analysed. The developed complex mathematical model of an electric vehicle including a traction battery, two inverters and two asynchronous electric motors integrated into an electric portal bridge allowed us to obtain and study the load parameters of the battery in real driving cycles. Data were verified by comparing simulation results with the data obtained during driving.