The superstructure of a coastal bridge is prone to overturn or unseating under a catastrophic tsunami, which seriously affects the post-disaster emergency rescue. In this paper, we establish a safety assessment framework for the superstructure of a bridge with a box girder under a potential landslide tsunami, and apply it to an in-service box girder and Baiyun Slide Complex on the southeast coast of China. First, a meshless numerical approach called Tsunami Squares (TS) is used to predict the movement of landslides and tsunamis. Additionally, we introduce the velocity-weakening basal friction effect in the model to optimize the landslide dynamics. Second, the maximum lateral and vertical wave loads on a box girder can be estimated using the time series of the wave height and velocity in the TS model. Third, we construct a safety evaluation method for the superstructure using the reaction of the bearing as the critical index. The results indicate that the framework developed here provides instructive guidance for evaluating the safety of coastal bridge superstructures during tsunami disasters, and we discuss the influence of the basal friction effect, bridge elevation, and support type on the structural safety.

Wave-induced forces pose significant challenges to marine structures, especially pile groups, where cap structures and pile spacings play critical roles in load distribution and structural stability. A physical wave flume experiment was conducted to investigate the influences of cap structures and pile spacings on wave load distributions under different wave conditions. Spatial and temporal variations in wave load distributions, including temporal variations in horizontal force, were measured as wave pressure rather than force. The results demonstrate that cap structures significantly alter the distributions of wave loads on pile groups. The integration of the cap increases the horizontal forces on the front pile and slightly reduces the vertical pressures across the pile group, particularly on the rear pile at relatively low elevations. The cap also delays the peak moment of horizontal force, especially in shallow water depths, where impact loads are more prominent and the cap induces water splash-back. Additionally, reducing pile spacing mitigates interference effects, optimizing the load distribution across piles by modulating flow velocity and pressure. The vertical pressure distribution exhibits a tiered pattern, with lower sections experiencing consistent loading, middle sections being subjected to higher loads at larger spacings, and upper sections being more affected by the cap at smaller spacings. As wave velocity and water depth increase, the differences in pressure intensity between pile groups with and without cap structures decrease, indicating the stabilizing effect of wave characteristics on structural response. This study provides insights into the design of marine pile group structures to optimize their performance characteristics under dynamic wave loading conditions.