The determination of the maturity of compost and other organic fertilizers is very important because of possible phytotoxic or phytostimulating effects. The maturity of compost can be assessed on the basis of chemical analyses, and a germination test with different test plants is most often used to determine phytotoxicity. In this research, the maturity of compost produced from the plant residues subsequent to the maintenance of green public areas was assessed using the results of chemical analyses. Simultaneously, a germination test was carried out with the four test plant species (cucumber, garden cress, triticale, and barley) to determine the phytotoxicity of compost extract in a ratio of 1:2.5 v/v (1:3.3 w/v) and 1:10 v/v (1:13.3 w/v) and the three ammonium N solutions (in the concentrations of 200, 400, and 600 mg/L NH₄-N). According to the chemical properties of compost (primarily the C/N, NH₄-N/NO₃-N ratios, and the NH₄-N concentration) and the germination test with cucumber and garden cress, we may conclude that the tested compost was mature and that we did not expect a phytotoxic effect. The choice of a plant is very significant because the germination test with a compost extract demonstrated an undoubted phytostimulating effect on the garden cress and cucumber, with a more pronounced phytostimulating effect of the 1:10 than that of the 1:2.5 v/v compost extract. No such effect was detected on the monocotyledonous test plants triticale and barley since the 1:10 v/v extract had no significant effect, and the 1:2.5 v/v extract had a phytotoxic effect, moderate on the triticale and high on barley. The conclusion is that garden cress and cucumber are suitable test plants for the determination of compost’s phytostimulative effect, but they are not suitable for the determination of phytotoxicity for monocotyledonous plants, especially if the cause of phytotoxicity is a non-ammonium component. Barley is the most suitable species for the determination of compost’s non-ammonium phytotoxicity and nitrogen’s ammonium-form phytostimulative or phytotoxic effect. It would be very useful to conduct a comparative germination test with the compost extracts in the ratios 1:2.5 and 1:10, whereby the 1:2.5 extract would be used as a test of phytotoxicity, and the 1:10 extract for the test of a phytostimulating effect.

Determining the maturity of compost and other organic fertilizers is very important because of possible phytotoxic or phytostimulative effects. The maturity of the compost can be assessed on the basis of chemical analyses, and the germination test with different test plants is most often used to determine phytotoxicity. In this research, using the results of chemical analyses, the maturity of compost produced from plant residues after maintenance of green public areas was assessed. At the same time, a germination test was carried out with 4 test plant species (cucumber, garden cress, triticale, barley) to determine the phytotoxicity of compost (i.e. compost extract in a ratio of 1:2.5 and 1:10) and 3 ammonium N solutions (in concentrations of 200, 400 and 600 mg/L NH4-N). According to the chemical properties of compost, primarily the C/N and NH4-N/NO3-N ratios, as well as the NH4-N concentration, and the germination test with cu-cumber and garden cress, we can conclude that the tested compost was mature and that we do not expect a phytotoxic effect. The choice of the plant is very significant because the germination test with compost extract shows an undoubted phytostimulative effect on garden cress and cu-cumber with more pronounced phytostimulative effect of compost 1:10 than 1:2.5 extract. No such effect was found on the monocotyledonous test plants triticale and barley since the 1:10 ex-tract had no significant effect, and the 1:2.5 extract had a phytotoxic effect, moderate on triticale and high on barley. The conclusion is that garden cress and cucumber are suitable test plants for determining phytostimulative effect of compost, but they are not suitable for determining phytotoxicity for monocotyledonous plants, especially if the cause of phytotoxicity is some non-ammonium component. Barley is the most suitable species for determining non-ammonium phytotoxicity of compost and phytostimulative or phytotoxic effect of ammonium form of nitrogen. It would be very useful to conduct a comparative germination test with compost extracts in the ratio 1:2.5 and 1:10, whereby the 1:2.5 extract is used as a test for phytotoxicity, and the 1:10 extract for testing phytostimulative effect.

Since plant’s edible parts are one of the most important sources of nutrition, agronomic biofortification plays a huge role in overcoming mineral deficiency worldwide. The field-based research trial was set up in 2 years (2020 and 2021) with seven different treatments of foliar Zn and Se biofortification: 1. control (without Se or Zn solutions); 2. Se_1 treatment: 10 g/ha Se; 3. Se_2 treatment: 20 g/ha Se; 4. Se_3 treatment: 30 g/ha Se; 5. Zn_1 treatment: 3 kg/ha Zn; 6. Zn_2 treatment: 6 kg/ha Zn; 7. Se_3 Zn_2 treatment: 30 g/ha Se + 6 kg ha Zn. There were six soybean varieties of the 00 to I maturity group (Ika, Korana, Lucija, Sonja, Sunce, and Toma) included in the study, which originated from the Agricultural Institute Osijek, Croatia. After sampling the plants at the harvest, the macro- and micronutrient status in the grain, pods, leaves, and stems were determined, as well as nutrient removal by the plant. In general, biofortification treatment has a very significant influence (p < 0.001) on both Zn and Se accumulation in soybean grain and the removal of the elements within all above-ground organs. The highest increments of Zn in the soybean grain were determined at the Zn_2 treatment, which was 43% higher than the control treatment. The Toma variety accumulates the highest Zn in the grain (61.47 mg/kg), and the Lucija variety accumulates the highest Se (1070.71 µg/kg). The Se content in the soybean grain was the highest at the Se_3 treatment, where it was 53 times higher compared to the control. The linear regression showed that for each kg Zn and g Se applied, the grain status increased by 3.18 mg/kg and 338.71 µg/kg, respectively. The highest Zn nutrient use efficiency (NUE) of foliar biofortification for grain (2.6%) and vegetative mass (4.4%) was with 3 kg/ha (Zn_1). Generally, for all the Se treatments, it was found that the seed and vegetative mass yields of 4.0 t/ha have average Se NUE, around 38%, and vegetative mass of around 6%.

Climate change and the variable extreme weather conditions that today’s agricultural producers are dealing with represent some of the most important issues in food production. Nowadays, weather patterns are increasingly unpredictable, characterized by frequent fluctuations in temperature, precipitation, and extreme weather events. As a result, there is an increasing demand for scientists to develop more resilient and tolerant crop cultivars. Plant breeders must become creative and utilize all available resources to create modern high-yielding and widely adapted cultivars to help agriculture grow and thrive amidst the emerging changes. Forage legumes, due to their beneficial characteristics, are among the crops that can contribute to mitigating the consequences of climate change. Furthermore, what certainly does not contribute to weather conditions is the erosion of plant genetic material, which has been caused by the modernization of agriculture and the selection of the best cultivars with desirable traits over many years. Crop wild relatives (CWRs) and landraces represent plant genetic materials rich in novel gene variants that contain traits for resistance and tolerance to different climatic conditions. To expand the genetic base of cultivars and mitigate the consequences of climate change, breeders are increasingly utilizing pre-breeding methods. These methods include all the activities connected to the identification of desirable genes and traits from un-adapted materials, such as CWRs, and the transformation of these traits to an intermediate set of materials that can be used for creating new cultivars. This review paper will cover the pre-breeding process, including its components, and the resistance and/or tolerance of the CWRs and landraces of forage legumes to different extreme environmental conditions.

Climate change is advancing faster than conventional crop cycles, and this temporal lag represents a critical constraint on modern agricultural production. By significantly shortening generation times, speed breeding (SB) transforms breeding from a fixed constraint into a manageable experimental parameter. Today, SB is increasingly integrated within climate-smart agriculture, not only for rapid generation turnover but also through emerging stress-informed SB protocols designed to mimic key abiotic constraints. At the same time, no universal approach to SB exists. Protocols must be adapted to the highly heterogeneous species-specificities regarding photoperiodicity and light response. The accelerated loss of genetic diversity due to small populations, together with the limited ability of controlled chambers to simulate complex field conditions, remains a major challenge. This review synthesizes literature from 1995 to 2025 on the technical foundations of SB, its application in major crops, and integration with modern breeding, phenotyping, and AI-driven tools. The available knowledge and evidence indicate that SB is most effective when integrated into breeding pipelines together with multi-district field-testing and stress-aware protocols, rather than used as an isolated technique. SB provides one of the strongest levers available to accelerate crop improvement under rapidly changing climate conditions.

Zinc (Zn) biofortification is a promising agronomic approach for improving crop nutritional quality and reducing the accumulation of toxic elements in edible plant parts. The aim of the present study was to evaluate differences in Zn and Cd status and accumulation among Zn-biofortified soybean genotypes grown under alkaline soil conditions. This study was conducted in Eastern Croatia with six soybean genotypes (0–1 maturity group): Ika, Korana, Lucija, Sonja, Sunce, and Toma (Agricultural Institute Osijek, Osijek, Croatia). Foliar biofortification treatments were applied at the beginning of flowering at 0 (control), 3 kg/ha (Zn_1), and 6 kg/ha (Zn_2). Even though the genotype Ika had the highest Zn-bioconcentration value across all treatments and both years, the Toma genotype had the highest seed Zn concentration (64.87 mg/kg), whereas the Sonja genotype had the highest leaf Zn concentration (405 mg/kg). Biofortification treatments significantly (p < 0.001) increased soybean seed Zn content, with the highest increment under Zn_2. Averaged across both Zn biofortification treatments, Cd concentration in the soybean seed decreased by 33.4% in 2020 and by 45.8% in 2021 as compared to the control (31.53 and 51.47 µg/kg, respectively). Regarding the genotypes, under Zn treatment, Ika, Korana, Lucija, and Toma showed increased Zn concentrations but decreased Cd concentrations compared with the control, whereas the Sonja and Sunce genotypes showed a distinct response, with both Zn and Cd increasing under Zn treatments, indicating a possible synergistic interaction between Zn and Cd uptake. Generally, the findings indicate that foliar Zn biofortification on alkaline soil can improve soybean seed nutritional quality by increasing Zn concentration and further reduce the already low seed content of Cd.