Thermal treatment of bromine-contaminated polymers ( i.e. , as in e-waste) with metal oxides is currently deployed as a mainstream strategy in recycling and resources recovery from these objects.
10 April 2023 in Journal of Chemical Information and Modeling
The release of bromine-free hydrocarbons and gases is a major challenge faced in the thermal recycling of e-waste due to the corrosive effects of produced HBr. Metal oxides such as Fe2O3 (hematite) are excellent debrominating agents, and they are copyrolyzed along with tetrabromophenol (TBP), a lesser used brominated flame retardant that is a constituent of printed circuit boards in electronic equipment. The pyrolytic (N2) and oxidative (O2) decomposition of TBP with Fe2O3 has been previously investigated with thermogravimetric analysis (TGA) at four different heating rates of 5, 10, 15, and 20 °C/min, and the mass loss data between room temperature and 800 °C were reported. The objective of our paper is to study the effectiveness of machine learning (ML) techniques to reproduce these TGA data so that the use of the instrument can be eliminated to enhance the potential of online monitoring of copyrolysis in e-waste treatment. This will reduce experimental and human errors as well as improve process time significantly. TGA data are both nonlinear and multidimensional, and hence, nonlinear regression techniques such as random forest (RF) and gradient boosting regression (GBR) showed the highest prediction accuracies of 0.999 and lowest prediction errors among all the ML models employed in this work. The large data sets allowed us to explore three different scenarios of model training and validation, where the number of training samples were varied from 10,000 to 40,000 for both TBP and TBP + hematite samples under N2 (pyrolysis) and O2 (combustion) environments. The novelty of our study is that ML techniques have not been employed for the copyrolysis of these compounds, while the significance is the excellent potential of enhanced online monitoring of e-waste treatment and extension to other characterization techniques such as spectroscopy and chromatography. Lastly, e-waste recycling could greatly benefit from ML applications since it has the potential to reduce total and operational costs and improve overall process time and efficiency, thereby encouraging more treatment plants to adopt these techniques, resulting in reducing the increasing environmental footprint of e-waste.
27 August 2018 in Industrial & Engineering Chemistry Research
Oxygen availability was identified to play a key role in determining the product selectivity of tetralin oxidation conducted at a constant temperature and pressure in a microfluidic reactor. The current study is concerned with applying chemometrics involving regression techniques to identify a single most important parameter that directly affects oxygen availability and has a high influence on tetralin conversion (CR) and product selectivity (S). Five parameters (predictors) identified previously were the gas–liquid interfacial area (a), the length of the oxygen gas bubble (LG), the length of the liquid slug (LS), the two-phase superficial velocity (UTP) and the liquid flow rate to the reactor (Q), where ‘a’ was suspected to be directly related to oxygen availability. CR and S were regressed on all the predictors by fitting separate simple linear regression (SLR) models. The decreasing order of explained variance in the outputs based on the calibration model was as follows: in CR: a2 > LG > U3TP > LS > Q; in S: a > LG > U2TP > Q. The powers of the variables indicate the respective best fits determined through evaluation of statistical performance measures. Multicollinearity issues among predictors were detected through Pearson's correlation coefficients and diagnostics like variance inflation factors (VIF) and eigenvalues of the correlation matrix. This issue was addressed through multiple linear regression (MLR) by considering a second input in addition to the best predictor from the SLR (a). Drastic changes in regression coefficient estimates and inflated standard errors rendered the coefficients of all other variables (except ‘a’) insignificant in the MLR models. The incremental contribution of ‘a’ towards improving the output variance was also confirmed through F-tests and partial correlations with the outputs, controlling for other variables as well. Thus, it could be stated with certainty that the gas–liquid interfacial area affected the outcomes the most. The findings from this study could be applied in industrial reactor design (for example – loop reactors), where the product selectivity can be controlled effectively through a higher interfacial area. In addition, through chemometrics, the reaction progress could be monitored by predicting reactant conversion and product selectivity, thereby eliminating the need for offline gas chromatographic (GC) measurements.