Currently, the tuberculosis (TB) detection model based on chest X-ray images has the problem of excessive reliance on hardware computing resources, high equipment performance requirements, and being harder to deploy in low-cost personal computer and embedded devices. An efficient tuberculosis detection model is proposed to achieve accurate, efficient, and stable tuberculosis screening on devices with lower hardware levels. Due to the particularity of the chest X-ray images of TB patients, there are fewer labeled data, and the deep neural network model is difficult to fully train. We first analyzed the data distribution characteristics of two public TB datasets, and found that the two-stage tuberculosis identification (first divide, then classify) is insufficient. Secondly, according to the particularity of the detection image(s), the basic residual module was optimized and improved, and this is regarded as a crucial component of this article’s network. Finally, an efficient attention mechanism was introduced, which was used to fuse the channel features. The network architecture was optimally designed and adjusted according to the correct and sufficient experimental content. In order to evaluate the performance of the network, it was compared with other lightweight networks under personal computer and Jetson Xavier embedded devices. The experimental results show that the recall rate and accuracy of the E-TBNet proposed in this paper are better than those of classic lightweight networks such as SqueezeNet and ShuffleNet, and it also has a shorter reasoning time. E-TBNet will be more advantageous to deploy on equipment with low levels of hardware.

A prompt γ neutron activation analysis (PGNAA) facility based on a ²⁵² Cf spontaneous fission neutron was performed with the final goal of obtaining various optimised radiation protection design parameters. MCNP Monte Carlo code was used to simulate the lead (Pb) shield thickness on two sides of the sample chamber, and B ₄ C, B ₂ O ₃ , LiOH, LiF, and borax were selected as neutron‐absorbing materials that were simulated to determine optimal parameters for the optimal design of a biological multilayer composite shield. A series of calculations performed with the MCNP code indicated that the 5 cm thick Pb innermost layer of a biological shield rapidly reduced fast neutrons, and a moderation layer of 25 cm thick paraffin, 20 mm thick borax, and 2 mm thick B ₄ C were selected as neutron‐absorbing materials. The calculated biological shield protection parameters satisfied the requirements of the PGNAA facility used in the experiment.