The growing demand for high-performance and cost-effective composite materials necessitates advanced computational approaches for optimizing their composition and properties. This study aimed at the application of machine learning for the prediction and optimization of the functional properties of composites based on a thermoplastic matrix with various fillers (two types of fibrous, four types of dispersed, and two types of nano-dispersed fillers). The experimental methods involved material production through powder metallurgy, further microstructural analysis, and mechanical and tribological testing. The microstructural analysis revealed distinct structural modifications and interfacial interactions influencing their functional properties. The key findings indicate that optimal filler selection can significantly enhance wear resistance while maintaining adequate mechanical strength. Carbon fibers at 20 wt. % significantly improved wear resistance (by 17–25 times) while reducing tensile strength and elongation. Basalt fibers at 10 wt. % provided an effective balance between reinforcement and wear resistance (by 11–16 times). Kaolin at 2 wt. % greatly enhanced wear resistance (by 45–57 times) with moderate strength reduction. Coke at 20 wt. % maximized wear resistance (by 9−15 times) while maintaining acceptable mechanical properties. Graphite at 10 wt. % ensured a balance between strength and wear, as higher concentrations drastically decreased mechanical properties. Sodium chloride at 5 wt. % offered moderate wear resistance improvement (by 3–4 times) with minimal impact on strength. Titanium dioxide at 3 wt. % enhanced wear resistance (by 11–12.5 times) while slightly reducing tensile strength. Ultra-dispersed PTFE at 1 wt. % optimized both strength and wear properties. The work analyzed in detail the effect of PTFE content and filler content on composite properties based on machine learning-driven prediction. Regression models demonstrated high R-squared values (0.74 for density, 0.67 for tensile strength, 0.80 for relative elongation, and 0.79 for wear intensity), explaining up to 80% of the variability in composite properties. Despite its efficiency, the limitations include potential multicollinearity, a lack of consideration of external factors, and the need for further validation under real-world conditions. Thus, the machine learning approach reduces the need for extensive experimental testing, minimizing material waste and production costs, contributing to SDG 9. This study highlights the potential use of machine learning in polymer composite design, offering a data-driven framework for the rational choice of fillers, thereby contributing to sustainable industrial practices.
Author(s): Hovorun T. P.1, Berladir K. V.1*, Pererva V. I.1, Rudenko S. G.1, Martynov A. I.1Affilation(s): 1Sumy State University, 2 Rymskogo-Korsakova St.,
This article summarizes findings in the field of the history, composition, and mechanical properties of WPCs (wood–plastic composites) formed by combining two homogeneous substances, i.e., a polymer matrix with cellulose fibers in a certain ratio (with the addition of additives). In relation to a wide range of applied natural reinforcements in composites, it focuses on wood as a fundamental representative of lignocellulosic fibers. It elucidates the concept of wood flour, the criteria for its selection, methods of storage, morphological characteristics, and similar aspects. The presence of wood in the plastic matrix reduces the material cost while increasing the stiffness. Matrix selection is influenced by the processing temperature (Tmax = 200 °C) due to the susceptibility of cellulose fibers to thermal degradation. Thermoplastics and selected biodegradable polymers can be applied as matrices. The article also includes information on applied additives such as coupling agents, lubricants, biocides, UV stabilizers, pigments, etc., and the mechanical/utility properties of WPC materials. The most common application of WPCs is in automotive sector, construction, aerospace, and structural applications. The potential biodegradability and lower cost of applications featuring composite materials with natural reinforcements motivated us to delve into this type of work.
In intelligent manufacturing, the phase content and physical and mechanical properties of construction materials can vary due to different suppliers of blanks manufacturers. Therefore, evaluating the composition and properties for implementing a decision-making approach in material selection using up-to-date software is a topical problem in smart manufacturing. Therefore, the article aims to develop a comprehensive automated material selection approach. The proposed method is based on the comprehensive use of normalization and probability approaches and the linear regression procedure formulated in a matrix form. As a result of the study, analytical dependencies for automated material selection were developed. Based on the hypotheses about the impact of the phase composition on physical and mechanical properties, the proposed approach was proven qualitatively and quantitively for carbon steels from AISI 1010 to AISI 1060. The achieved results allowed evaluating the phase composition and physical properties for an arbitrary material from a particular group by its mechanical properties. Overall, an automated material selection approach based on decision-making criteria is helpful for mechanical engineering, smart manufacturing, and industrial engineering purposes.